Thinking of selling my 30/338 Lapua (300 Lapua)
Gun started life as a factory Sako TRG-42 but it had one of the worst barrels I had every seen. So when my turn came up at GRE-TAN Rifles off it went.
I had Greg build a 30/338 Lapua. The Specs are as follows
30" Krieger barrel with Vias MB, 1-12 twist , TRG-42 contour
Action threads were single point cut, Bushed firing pin , Action face trued and squared , etc
Custom dies included
All metal work was then KG coated
The Rifle is extremely accurate with 190gr Bergers (Few groups shown)
.200 or less @ 100 yards
1 inch or less @ 500 yards
Around 5 inches @ 1100 yards
Rifle has been fired 53 times
I would like to get $3000 , Scope,rings,bi-pod not included
I am open to trades/cash on High end optics
This is not a educational thread on a 30/338 Lapua, I will only answer question to seious inquires.
There is a good article on 6mmbr.com on the 300 Lapua.
Previous Topic
Index
