Recent content by jordanh

Re: Neck sizer or FL sizer <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body"> Then FL size definitely. Any possible/theoretical gains in accuracy from not sizing the body of the brass will be offset by the challenging environment and human element...

Re: Neck sizer or FL sizer So I can indeed set up a FL sizing die to only bump back the shoulder .003? I just need to adjust it down a little at a time until I achieve this instead of following the mfg instruction to set it so the press 'cams' over, correct? When doing this, is this doing...

Re: Neck sizer or FL sizer It is a Remington 700 action in .308. I am not stuck on rcbs by any means, it's just more of what I am familiar with, and have readily available at stores in my area. So With a full length bushing die am I able to set it adjusted up in my press to size the neck...

Re: Neck sizer or FL sizer After more reading this morning it seems the ideal die that I need is a Forster bump die, problem is, anyone know where one is in stock? I see that with the rcbs FL bushing die you can bump the sholder back by removing the neck bushing and adjust the die upwards...

Ive been researching this a lot and read the brass prep topic above, but am still a bit foggy on one issue. I purchased 200 rnds of new brass and all have been fire formed in my chamber. I am now looking to start loading up new lots with the fire formed brass. I have read that you want to bump...

Re: sps tactical, OAL length to lands <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: flyboy</div><div class="ubbcode-body">I couldn't reach the lands with the SPS I had, and that was with 220 SMK's. Just load for the magazine and be done with it. It will shoot...

Re: sps tactical, OAL length to lands I ended up doing a google search and came up with a snipers hide topic that answered all my questions... sorry for the lack of research. Thank you for the help.

I just picked up my sps tactical. The first few rounds I loaded up I loaded to book spec of 2.810" OAL. I just picked up the Hornady Lock-N-Load OAL tools and measured out my length to the lands. With the Bullet comparator it measured 3.355" which ends up being roughly 2.930" from head to tip...

Re: Where to buy Falcon and Millett I can't seem to find a millett available at the same place I can find Burris rings available. If I have to settle for the Millett I want to get the rings at the same time... sounds dumb.. but or else I'd rather wait it out for the Falcon.

Re: Where to buy Falcon and Millett SWFA, and wonders are out of falcon. I am almost positive rws is too..

I have been looking for a Falcon Menace or a Millett trs for a few days now. No one seems to have one in stock! I am looking to order tonight or tomorrow. Does anyone know where I can find one in stock and order today? Oh, and Looking for metric turrets.

Re: Printable data forms for Log Book I have a question about the log book fusilier posted. I see he has a page at the beginning for load data, and also pages at the end for reloading data. Do you guys use the pages at the end when working up a load, and then when you find a load you like it...

Re: Where to find Falcon Menace? I'll have to give mitchell ordnance a call and see if they are in stock. I called matt at sight wonders and they won't be in for a few days, maybe a week.

Re: Burris Extreme rings If there was no gap when you properly torqued them, then they wouldnt be clamping on the scope tube. The gap is clearence for the two halves to be torqued to the scope tube.

Re: Where to find Falcon Menace? If I were to get a 4-14 falcon, in what type of shooting scenario would I wish I went with the 5-25? I found a 4-14 falcon with the EMD reticle, which is the reticle I want, but can only find 5-25 with the ML16. Is the exta power really needed? I should add...