• Top Shot Throwback Contest - Only a Few Hours Left To Enter!

    Tell us about your best shot or proudest moment on the range this past year! Winner gets new limited edition Hide merch. Remember, subscribers have a better chance of winning!

    Join contest Subscribe

Recent content by MDT_Josh

  1. MDT_Josh

    MDT Metal Mag Issue

    We're not exactly on Gen5 yet 😅 The new design with more stabilizing ribs for all kinds of calibers and the improved feedlip geometry is almost "Gen 1.5", but the Gen2's are being worked on now! If those tweaks don't help with the last round @C130 feel free to reach out again and we'll get you...
  2. MDT_Josh

    MDT Metal Mag Issue

    It is more likely to be the spring geometry (internal bends) than the feedlips! First I would suggest reaching out to our Customer Support Team, then I would take the cover plate off the mag, pull out the spring and follower, then stretch them and try to have the spring align vertically to the...
  3. MDT_Josh

    Precision Rifle Gear Bipods?

    Working hard on them and they should be available really soon!* If all goes to plan, but keep an eye on our newsletter and website :)
  4. MDT_Josh

    Any ideas on attaching a CRUSH IT timer to a bino harness?

    One of our shooters; Matt Hornback, used a Molle-to-M-Lok attachment that he found on eBay to mount his Crush iT so that it was always visible on the clock for NRL Hunter matches!
  5. MDT_Josh

    Precision Rifle Gear MDT ACC Elite Full Length Bridge EOI

    It was brought up internally many moons ago and decided that we didn't want to make them at the time. There will always be an aftermarket for the aftermarket and people like @Hennig coming up with stuff to make :)
  6. MDT_Josh

    Did MDT drop the ball?

    No worries @Trevor300wsm and @Chukwithak ! This is more of a problem on our end for making sure that we all know what's going on in development and understanding the limitations of certain actions and platforms. Unfortunately there are a lot of nuances in action design and as someone who is...
  7. MDT_Josh

    Did MDT drop the ball?

    To clear up some confusion here (and provide some background): All Tikka T3/T3x actions are made the same length (from 204 Ruger all the way up to 9.3x62) meaning that they only switch out a few parts here and there to adjust compatibility with their factory stocks and magazines, This is not a...
  8. MDT_Josh

    New MDT CRBN Stock/Chassis?

    Can't comment on that yet, but it would be weird for us to only develop it for the R700 SA RH :) Lot's happening internally with this project right now and I can't wait until we can share more! - Josh
  9. MDT_Josh

    New MDT CRBN Stock/Chassis?

    We have not ruled it out and have played around with a few products using the "forged" or chopped fiber aesthetics, just not the CRBN yet. We sill have a ton of carbon fiber projects in the pipeline, so be sure to keep your eyes out as we continue to develop and expand our product lines ;) - Josh
  10. MDT_Josh

    Help me fix my HNT26

    Which variant though? We have ventured down the rabbit hole of developing a Mauser inlet a few times, but without a dedicated variant to work off of, it's hard to make them all work :(
  11. MDT_Josh

    Official MDT 6BR Magazine Thread

    Hey EmanP, Sorry to hear that you're having issues, but it seems like there has been a little bit of a mix-up with your magazines/followers? Those appear to be our 10 round followers in your 12 round magazine, which would definitely cause capacity issues! You have a few options on how to solve...
  12. MDT_Josh

    New MDT CRBN Stock/Chassis?

    Right now we're busy optimizing the production of the RH inlet and working on some new developments, so nothing in the works for us lefties yet unfortunately!
  13. MDT_Josh

    MDT Oryx - Weight adding options

    No these are designed for use with our existing M-Lok exterior forend weights and do not require any proprietary weight setup! WE are a Canadian company and design our parts in mm, so that is the reason for the "suspicious" 140 mm spacing ;) - Josh
  14. MDT_Josh

    MDT HNT26

    This is an issue we have since addressed and brought a lot more control to our molded CF dovetails, especially with the launch of the CRBN! I wasn't aware that Matt at Sawtooth was making a rail so thanks for sharing :)
  15. MDT_Josh

    PRS oriented stock design

    Very cool! It's awesome to see a product go from an idea, to a model, to 3d prints then to a real prototype. Good work! What DBM cutout profile are you using in this stock right now?
See more
Top Bottom
Back
Home
Forums
Merch
Alerts