• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

  • Site updates coming next Wednesday at 8am CT!

    The site will be down for routine maintenance on Wednesday 6/5 starting at 8am CT. If you have any questions, please PM alexj-12!

Recent content by muleman

  1. M

    Leica Rangemaster CRF 2700-B

    Well McDaddy tell us what you think, it's killing me to know.
  2. M

    Newcon 2200si Rangefinder

    Nobody knows anything about these?
  3. M

    Rifle Scopes Newcon 2200si rangefinder

    Anyone know anything about these new Rangefinders? I'm wanting to get to a mile without taking out a second mortgage.
  4. M

    Newcon 2200si Rangefinder

    Do any of you have one of these or know anything about them? I'd love to here a review on these, especially priced at around $700.00? Thanks, Wayne
  5. M

    Newcon 2200si Rangefinder

    Anyone have or know anything about these & there true ranging capability? I'm looking for consistent readings to a mile.
  6. M

    Range Report Scope Dialup Correction

    colson , The program is SHOOTER, under the Firearm Data section they show the Elevation Correction Factor. After some research on this it looks like I should be below 1 for a correction factor in the program, as it is moveing (32.25') more than the correct dialup(31.41). I think I should have...
  7. M

    Range Report Scope Dialup Correction

    Need Expert Advice! Hope this belongs here? I checked my true dial up at 100 yds, measured with a steel tape for Accuracy. When I dialed my Nightforce up 30 MOA it truly move 32.25" with the gun locked in a vice for absolutely no movement. I repeated this 3 times & everytime I moved from 0...
  8. M

    Range Report .338 lapua load work up 285 hornady/h-1000

    I've just started with a Savage 110 fcp in 338 Lapua. I'm using lapua brass 285 Hornady Amax, .015 off the lands at 3.760", & H1000. I took it up to 92gr at 54 degrees 1300 elevation, & 28.54 Baro with 26' barrel with some very slight marking on the brass, Extractor ring was slightly visable...
  9. M

    Member Link Up Nebraska members

    Thought I'd post up here, I don't post a lot but search here every day. Great bunch of knowledgeable people here! I've only been shooting Long range for 6 years now after getting educated by some other hunters, when on a hunt in Arizona. I'm just getting started on a new 338 Lapua this spring...
  10. M

    Let the panic SELLING begin!

    Alaskaman11, Could you post Pics?
  11. M

    Hunting & Fishing HELP Utah ELK, Panguitch Lake Area

    Does anyone know anything about this unit for Elk Hunting. I'm thinking about useing my 12 points to draw the late season ELK Tag. At 62 I may not be phisically able to hunt the Book Cliffs Roadless unit by the time I can draw it. Is this unit worth 12 Points? Another area I'm looking at, for...
  12. M

    Bad Winchester primers

    Re: Bad Winchester primers I also torched the bolt face on a 300WM & 300RUM with winchester magnum primers. I'll never use them Again!!! I went to CCI 250 Magnums with the same loads & no more Problems?
  13. M

    WTB Berger 215 Hybrid

    Anybody know of anywhere to get 100 of these to try.
  14. M

    Which bullet it won't shoot!!!

    Re: Which bullet it won't shoot!!! Just an up date on this rifle I pulled this think apart,dropped the trigger to 2 pds, skim bedded the action with Devcon, added a Watts Mag Extension, & went back to load development. It now shoots consistant 1/2" groups or better, with 91.5 of H-1000 & 208...
  15. M

    Hornady .30 208 A max for hunting? Why not?

    Re: Hornady .30 208 A max for hunting? Why not? I've shot 3 Elk now with the 208 Amax, & would highly recommend them. 1 at 351yds, 1 at 642yds, & 1 at 791yds. Non of them dropped on impact, but were literally Dead Standing there, all were shot in the lungs with 1 shot. The 791 was Quarting...