Yup. $40 shipped, pay him after you're satisfied. He finished work on a run of them last week.Soooo.... do you just PM him for one?
Mine came in Monday. Excited to install it this weekend.
Yup. $40 shipped, pay him after you're satisfied. He finished work on a run of them last week.Soooo.... do you just PM him for one?
Let me know next time you are competing at frontline. I'll bring my AT out and we'll squad up to flex on the less cultured swine.View attachment 8148779
From Absolute Zero a couple weeks ago, having a blast shooting the regional PRS for the first time!
I’m 40 minutes from there , I will lend AI support tooLet me know next time you are competing at frontline. I'll bring my AT out and we'll squad up to flex on the less cultured swine.
I see you went back to the eww version instead of keeping the bow-chika-wow-wow thumbhole version.
I see you went back to the eww version instead of keeping the bow-chika-wow-wow thumbhole version.
Shame.
Lovely that what colour is it?Finally got my ATX from gunsmith early today. New cerokote job done.
View attachment 8149871
Will this trigger work in a AT?
It works in mineWill this trigger work in a AT?
Thanks! Can’t remember the exact name. Close to sniper grey. I will ask gunsmith next week and get back to youLovely that what colour is it?
They are actually the official distributor for the entire world except for the USA and Australia.Yes, that's the AI official dealer in the UK.
Chart added above. No analysis yet. ST did not pickup suppressed shots. I only had a limited time so I did not mess with attachment points to try and get it working. I'd like get your Andi and a Magneetospeed and do all four at once to see the results.How did the two chronographs compare ?
Some significant differences. Been looking at the bullet seeker... interested to see how the comparisons come out.Did some velocity testing with the ATX in 6BR Saturday on R4 at Quantico using the LR and SpeedTracker.
ETA - Speed Chart - No analysis yet conducted. Busy with life...
It's something I've thought about. Absent the Applied Ballistics radar setup that tracks out to like 2 miles, does it make a difference in what either unit reports as long as there is consistency? If you true your velocity, I would think either unit would be acceptable.Some significant differences. Been looking at the bullet seeker... interested to see how the comparisons come out.
Quoting my own post, but I had issues with the SpeedTracker picking up shots for the 300PRC and suppressed with the 6BR. I'm not going to mess with it, RMA from MidwayUSA and it's going back.Did some velocity testing with the ATX in 6BR Saturday on R4 at Quantico using the LR and SpeedTracker.
ETA - Speed Chart - No analysis yet conducted. Busy with life...
Thanks for your review and thoughts. Was just about to pull the trigger on one this week. Guess I’ll continue using my Lr.Quoting my own post, but I had issues with the SpeedTracker picking up shots for the 300PRC and suppressed with the 6BR. I'm not going to mess with it, RMA from MidwayUSA and it's going back.
Not intending to clog up the pic thread or dump on the ST, but I bought mine after a shooting buddy brought his out and used it on his MC in 6.5, worked fine. We took his and put it on my 300PRC and had limited success with very few captures. I bought one anyways thinking I would adjust the location to get through the gas cloud and capture velocities, and because Midway began carrying them. Unfortunately, even with multiple attempts in differing locations on the rail and with differing mounts, it didn't work for me. Second attempt was this weekend with the 6BR (thinking I'd learn about the unit and apply it to the PRC), but when it didn't work suppressed, I decided I didn't want to lose $1100. ST is clear they'll work with you to resolve any issue, but I was within Midway's return window and decided that was the best course of action for me.Thanks for your review and thoughts. Was just about to pull the trigger on one this week. Guess I’ll continue using my Lr.
Good call on the return. I’ve read a few post in the hide also about the ST. With others having some issues and some don’t. I don’t mind spending 1100$. As long as it’s working and repeatable. But if I have to fuck with it, then no. I’ve had my Lr when it first ever came out. No issues for me. But it’s just s little cumbersome to pack.Not intending to clog up the pic thread or dump on the ST, but I bought mine after a shooting buddy brought his out and used it on his MC in 6.5, worked fine. We took his and put it on my 300PRC and had limited success with very few captures. I bought one anyways thinking I would adjust the location to get through the gas cloud and capture velocities, and because Midway began carrying them. Unfortunately, even with multiple attempts in differing locations on the rail and with differing mounts, it didn't work for me. Second attempt was this weekend with the 6BR (thinking I'd learn about the unit and apply it to the PRC), but when it didn't work suppressed, I decided I didn't want to lose $1100. ST is clear they'll work with you to resolve any issue, but I was within Midway's return window and decided that was the best course of action for me.
View attachment 8152101
308 barrels last a long time. That one is definitely mature, but should still shoot very well. Barrels are consumables though, and for the chance at an AW id take it even if the barrel had 10k rounds through it. Any photos of the AW in question for us nerds?Guys, need your advice. Got a chance of getting an AIAW/308. I am a bit concerned since she has a round count of about 6000. How long do those barrels last and how many barrels could i use until the action is done. Is this ever going to happen? In my opinion the action itself should last a lifetime.
They are very rare and expensive over here in germany. Its the first one i saw in 5 years. Got a TRG and would finally like to check out myself about the differences of those 2. Both are military proven platforms which perform perfectly from my point of view.
My initial thought was go grab it for gods sake you wont get another chance
Thanks for your input!
The rifle itself is in very good condition from what i could see.
Cheers
The AW in my opinion is the holy grail of AI’s. So I guess how expensive is it and what is the price compared to say an AT or something similar if you can get that would sway my decisionGuys, need your advice. Got a chance of getting an AIAW/308. I am a bit concerned since she has a round count of about 6000. How long do those barrels last and how many barrels could i use until the action is done. Is this ever going to happen? In my opinion the action itself should last a lifetime.
They are very rare and expensive over here in germany. Its the first one i saw in 5 years. Got a TRG and would finally like to check out myself about the differences of those 2. Both are military proven platforms which perform perfectly from my point of view.
My initial thought was go grab it for gods sake you wont get another chance
Thanks for your input!
The rifle itself is in very good condition from what i could see.
Cheers
Guys, need your advice. Got a chance of getting an AIAW/308. I am a bit concerned since she has a round count of about 6000. How long do those barrels last and how many barrels could i use until the action is done. Is this ever going to happen? In my opinion the action itself should last a lifetime.
AgreeA dovetail AW is hard as hell to come by. Been a while since I have seen one of those for sale. They look so much cleaner with the dovetail with either the AI or Spuhr mount.
That’s so fuckin beautiful. I’d let it get me pregnant.
Sigh. Another trans self-identifies.That’s so fuckin beautiful. I’d let it get me pregnant.
Jesus that's a great combo. Put a. Awm in there and I'd almost sell off my clone collection for them.AT vs ATx
View attachment 8154556
AWM is just too hard to find one in Canada…Jesus that's a great combo. Put a. Awm in there and I'd almost sell off my clone collection for them.
What bag rider and grip are on the ATx?AT vs ATx
View attachment 8154556
Dependabilt (aka Sawtooth Rifles)What bag rider and grip are on the ATx?
That’s dinner
I tried to duplicate this but my deer weren't as brave (dumb).
Guys, need your advice. Got a chance of getting an AIAW/308. I am a bit concerned since she has a round count of about 6000. How long do those barrels last and how many barrels could i use until the action is done. Is this ever going to happen? In my opinion the action itself should last a lifetime.
They are very rare and expensive over here in germany. Its the first one i saw in 5 years. Got a TRG and would finally like to check out myself about the differences of those 2. Both are military proven platforms which perform perfectly from my point of view.
My initial thought was go grab it for gods sake you wont get another chance
Thanks for your input!
The rifle itself is in very good condition from what i could see.
Cheers
sawtooth bag rider and MK Marching Grip.What bag rider and grip are on the ATx?