- Thread starter R.Walters
- Start date
We shall see how things pan out. I just for an aTX and I know where one is but the sticker price killed me
Buy any AT-X, doesn't matter what generation, you won't go wrong...
Or if you already have a good barrelled action, dump it into an AICS AT-X chassis...
Just don't buy an AT or AX and expect to be overly competitive, the ergonomics and weight distribution are all different while the AT-X is by far the most useable in that respect.
Don't read that the wrong way...
I struggled with height over bore issues using an AT from 2016-2019, then having issues getting the balance right on an AXSA with the plastic hand guard area from 2019-2022 and now have an AT-X that is like driving an F1 race car compared a Toyota Hilux.
If you can afford one, the AT-X will save you a lot of heart ache.
Or if you already have a good barrelled action, dump it into an AICS AT-X chassis...
Just don't buy an AT or AX and expect to be overly competitive, the ergonomics and weight distribution are all different while the AT-X is by far the most useable in that respect.
Don't read that the wrong way...
I struggled with height over bore issues using an AT from 2016-2019, then having issues getting the balance right on an AXSA with the plastic hand guard area from 2019-2022 and now have an AT-X that is like driving an F1 race car compared a Toyota Hilux.If you can afford one, the AT-X will save you a lot of heart ache.
Hilarious. But for real, who makes that bolt knob and how do I get one?
You need one of these little adapter bois:
And a hefty boi:
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
McMaster-Carr has shit tons of 5/16x24 threaded knobs so if you just want bigger without the weight I’m sure they have something that would work. The factory bolt knob is around 1” diameter for reference.
I got the 1-3/8” brass ball knob and it’s a fuckin chonk. I wanted something large and preposterous and this is definitely that… but it makes bolt manipulation hilariously easy.
The thing driving up the price is the additional accessories you get included.
If you see the UK pricing for the Standard and Pro models, the Standard (basically like the "old" AT-X) is a similar price that the AT-X was, the hinge, bag rider and full rail are all pretty expensive add ons so the Pro model isn't badly priced.
It's definitely crazy that now the cheapest AI available in the USA is $6,500 but that's due to lack of a "cheap" option.
A bridge, hinge, and bag rider are worth $2K? What kind of bizzaro world bullshit math is that?
I just bought a bridge for $278 at Mile High, are you guys telling me a folding hinge and a mediocre bag rider are worth an extra $1700 and change?
I just bought a bridge for $278 at Mile High, are you guys telling me a folding hinge and a mediocre bag rider are worth an extra $1700 and change?
Doing nothing but jacking up the prices on the “old” gens too. I’m here for it.
I think a lot of folks are comparing it to the $4,250 "Sale" price that the AT-X has been at for a while, however the original MSRP is $5,250. So with the AT-XC being listed at $6,538, the difference would be $1,288. Folders are $250, a full bridge is $278, and assuming the AI tax on the bag rider, call it $120. Total would be about $648 meaning AI is essentially adding a $640 increase for the new action which is just keeping up with inflation at this point.
I can’t see them. Looks like they have a bunch of AT and AXSA in stock though
As much as I want one of these, the price tag is a killer
I wanted an AI for years. Glad I finally got mine last year, and for a decent deal too. I'm out of the AI market now. Too rich for my blood, and I'll consider my timing lucky.
Bingo. My AT will stay a 308 and live happily that way for its life
Now if damn AI can get some more AW mags to market that’s be great
I’m building an Impact range riffle as soon as I can collect enough cans or my OnlyFeet gains more traction, whatever comes first
I've been trying to talk myself out of a GAP PPR for the last hour. Even though they went up $500, it's still a heck of a lot of rifle for the money.
I'd buy it, but there's no more safe room, and I don't have anything that I want to sell.
I wanted one pre Curtis action. Bad.
Now they use the Curtis and im staying clear.
I can get an Impact with a Proof prefit a TT special and KRG chassis for about the same $
Same here. Got the discount. Got a discount on the Zeiss LPR S3 6-36X56 on top of the rifle. All told I feel pretty good about it, especially now!
Hah enjoy your inferior action without gas vents and two less action screws!
I have a running list for guys who are looking to get into the new XC. PM me and I'll see what we can do for guys.
Accuracy International AT-XC
Optics, scopes, & more for the precision marksman and serious hunter - Nightforce, Swarovski Optik, Vortex, Sako, Leica, Blaser, Tikka, Trijicon, & many more.
No pics but just the individual SKU listings.
Correct, but you can use the UK pricing to see how AI has priced this thing.
GBP export prices:
3650 AT (folding)
3938 AT-X (non-folding)
4380 AT-XC Standard
4980 AT-XC Pro
Definitely a massive price jump as far as an “entry level” AI, but that’s AINAs doing.
Running list?
As in running away screaming from the new prices
It's a more of a price jump then guys wanted to see that's for sure. Adding the 1300 bucks in for new action, bridge, and hinge is pretty much in line with what I thought it was going to be. I guess you could look at it as it's $1750 cheaper then the AXSA...
I estimated closer to $7500-$8k. That price doesn’t bother me at all. Figured we have the AXSR and now the short action version of that priced accordingly
At some point it starts getting too rich to send new buyers in that direction though. Especially in today’s market. We’re into where used AXMC prices used to be. Which seems more reasonable given the short or long action cartridges in the same rifle
Sounds like many have been jumping on the AT’s lately. Which I hoping still have a future for the kinda poor AI guys
I can see my death occurring due to the massive weight of the bolt lift, and my inability to wok the action fast enough while staying on target because of it...
A good definition of a hobby is something that makes terrible financial sense but you enjoy it anyway.
I Definitely understand that. I have a few FN SPRs with barrels spun on that - while not as smooth or feature rich - have been 100% reliable across all three examples that I own, and are stupidly accurate. I'm certainly never getting rid of them...and certainly not just to replace with the PPR.
***Enough of the sidetrack though***
I really think that AINA will adjust pricing (just a bit) on the new AT-XC. I doubt you'll see sub $6K on these new ones (until the next gen comes out in 9 months
). However as colors or generations come and go, a guy can probably get the discontinued ones for a bit less. I saved $750 by getting an Elite Sand. It might not hurt to sit out buying one for the first year or so...especially after what happened to the Gen 1-2 AT-X guys. Last edited:
My personal opinion is buy what you want and can afford. There is absolutely nothing bad about owning a Gen 1-3 AT-X or an “old” AT. There will always be new tech. It doesn’t mean the previous generation is obsolete. Plenty of dudes still putting in work with 20+ yo platforms.
I have a question about the short actions:
Are we saying "AXSA master race" yet?
Are we saying "AXSA master race" yet?
Vintage AT-X master race! Now that the AT-X is disconnected it's got the retro appeal:I have a question about the short actions:
Are we saying "AXSA master race" yet?
See my sig. As much as I want to love the rifle, AI (the company) keeps kicking me in the balls.
I can get shit on for free at work and home.
If you can't see sigs: Emailed AINA asking if my smith could get info to spin up a barrel. They said No.
I'm out.
I can get shit on for free at work and home.
If you can't see sigs: Emailed AINA asking if my smith could get info to spin up a barrel. They said No.
I'm out.
So you’re upset they don’t give out prints? It’s really not that difficult to measure and reverse engineer it. Or buy a barrel from someone who does AI prefits
Is that in $US?
No British Dollars, aka £
Thank you Einstein I'd never thought of that.
It about customer support. And lack thereof for a long list of items, of which this is just the latest.
I'm not a bigshot in the industry, so I can just fuck off. Message received.
Are the bipods really worth it over a “atlas”I have a question about the short actions:
Are we saying "AXSA master race" yet?
Thanks
They can be. But they have some special caveats.
- Sorta dedicated to one rifle or at least a group of rifles with the same barrel-to-mounting-point distance
- Can be a bit of a hassle to mount, depending on the interface chosen. I’m looking into the QR versions (not talking about the Arca)
- I own a panner. If you want to leave the panner version on the gun when placing it into a case, you have to take some precautions otherwise much scratcho will occuro. (Pool noodle over barrel…Dale the owner of EI does this too, or maybe RedBreast21’s idea of stuffing an orange tough plastic shim in there…see his pic)
- Can only be mounted waaaayyy out there, so if you have a short bench to shoot from, you’re SOL.
Edit: lower CoG than many (but not all) bipods (more stable).
And they fold up narrow so you don’t have to remove them to get them in most cases but they offer the same or more stability of wide-boi bipods (which don’t fit in cases well).
Last edited:
What he said, but I would emphasize the lowering of the CoG, which is why I use them.
Oh yeah, in my mind I was comparing them to my LRA Lite-Tactical F-Class (what a name!), which has a comparable low CoG.
Over an Atlas CAL the stability of both the LRA and EI is pretty significant. I’ll update my above list.
If you get stuck needing a barrel spun up for an older AI, there are several smith's that will do it. I'm assuming not an M27 thread prefit?
We all have our favorite rifle rifle builders. I'm partial to my local guy (Matt Stewart). He had zero problems with me bringing him my AT-X - and even used it to get the measurements to start making prefits.
Sucks that you got the cold shoulder from AI though.
What was the long list of items? Tim/Scott and all those guys have always been helpful.
I too long ago asked for the tenon print and got told no. Didn’t bother me, I just went and measured. You just seem pissy to be pissy. Has nothing to do with being a big shot or even in the industry.
