(This is a picture of one of the 1,000’s of these kinds of stickers all over my workplace…) kill me
An mkiii folder for 2500 is something I'd easily pay. If you can get it for less even better but if it were ME I'd get it for that.MK III
SecondsAn mkiii folder for 2500 is something I'd easily pay. If you can get it for less even better but if it were ME I'd get it for that.
If you pass on it shoot me a pm lol.
Elite Sand owners already know this and don't need to remind themselves daily..View attachment 8384710
(This is a picture of one of the 1,000’s of these kinds of stickers all over my workplace…) kill me
What do you think of the INOD? Did you look at the HISS? I'm currently running the EO TECH ELR Mk2, which is cool but seeing bullet trace is calling to me!I hear ya brother…. Try getting anything over an INOD.
I saw you poke those holes with a pencilEs vs fde blah blah blah how about you get out and get that ejection port scratched up.......
300prc quickly becoming my fav all around chambering....
View attachment 8385167
View attachment 8385172
I saw you poke those holes with a pencil
Pfft. That’s not my pic.That's .4 chief... Glad to see you upgraded that harris to a real biood
Impossible you were there you dont shoot![]()
Heads up that EuroOptic has black and dark earth AXSR MLOK forends in stock currently: https://www.eurooptic.com//Accuracy...h-Forend-Tube-Sub-Assembly-w-Integrated-.aspx
I already got a bunch of KeySlot weights so no longer on the hunt for one, but in case folks were looking.
EDIT: the dark earth ones are sold out already, black ones still available at https://www.eurooptic.com/Accuracy-...end-Tube-Sub-Assembly-w-Integrated-RRS-R.aspx
EDIT: all gone it appears
You'd have to get a pair of AXSR forend imperial bolts as well because AXSA forends apparently use metric threads as per https://www.snipershide.com/shooting/threads/axsa-forend-compatibility-with-axsr.7210136/ but other than that they should fit I believeSorry if this is a dumb question, will these fit the AX308 rifles as well?
I’m such a poor my AT is now wearing Vortex PMR rings and a Burris XTR3i
Suck
On
That
@Huskydriver
#indiannotthearrow
#poorsking
I’ll even put the Harris back in it
Luv my PRC. USPS was supposed to deliver a new barrel Friday and I had plans to get it zeroed Saturday at Quantico, but USPS never misses an opportunity to disappoint; package 2 was delivered on time, but not the barrel, or again on Saturday. It mailed from NY and is showing stuck in Richmond (90 minutes south of me no less), which means I may see it Tuesday.Es vs fde blah blah blah how about you get out and get that ejection port scratched up.......
300prc quickly becoming my fav all around chambering....
View attachment 8385167
View attachment 8385172
Luv my PRC. USPS was supposed to deliver a new barrel Friday and I had plans to get it zeroed Saturday at Quantico, but USPS never misses an opportunity to disappoint; package 2 was delivered on time, but not the barrel, or again on Saturday. It mailed from NY and is showing stuck in Richmond (90 minutes south of me no less), which means I may see it Tuesday.
I also need to work a decent load for it using N570, RL-26 or H1000. It's a 1/9 so it may not work with the 250 Atips, I'll use the 220 Bergers instead.
![]()
2925-2950 is just where I'd like to be with the 220s (if I can get there from here since I'm basically at 250 ASL). I've heard a lot of good about the new 230SMKs, but don't have any to experiment with, just Bergers and Hornady 225s.I was running the 230smk over 78 gr of retumbo from a factory 1/9 at 2930 yesterday
2925-2950 is just where I'd like to be with the 220s (if I can get there from here since I'm basically at 250 ASL). I've heard a lot of good about the new 230SMKs, but don't have any to experiment with, just Bergers and Hornady 225s.
Can you elaborate on "newer WM chambering"?Will depend on the chamber of the PRC. The newer WM chamberings will run with a PRC all day.
Can you elaborate on "newer WM chambering"?
Some of the older reamers used on the WM were for mainly the 170-190 class bullets. Newer chamberings allow to use with the newer longer bullets like the 200-230gr bullets. Best example of this is, a fellow member here has a Proof 300WM barrel, it has a shorter throat. Has tried with 215+gr bullets and will get pressure with almost any load. He also has a AI 300WM barrel and can shoot 215gr Bergers at 3k+ FPS. I can do the same as well with my AI 300WM barrel. My current loading is 208ELDM with 77gr H1000 right at 2946FPS. I can also load the same bullet with N565 and get 3023FPS with the same exact powder charge. We have tested the 215gr Bergers with 80-81gr of N570 and it easy to get that kind of speed with no pressure issues.Can you elaborate on "newer WM chambering"?
I thought you were supposed to put velcro over that area so it wouldn't get scratched up and appear used?Es vs fde blah blah blah how about you get out and get that ejection port scratched up.......
I wish that Hornady offered the 208 ELDM in a cartridge formSome of the older reamers used on the WM were for mainly the 170-190 class bullets. Newer chamberings allow to use with the newer longer bullets like the 200-230gr bullets. Best example of this is, a fellow member here has a Proof 300WM barrel, it has a shorter throat. Has tried with 215+gr bullets and will get pressure with almost any load. He also has a AI 300WM barrel and can shoot 215gr Bergers at 3k+ FPS. I can do the same as well with my AI 300WM barrel. My current loading is 208ELDM with 77gr H1000 right at 2946FPS. I can also load the same bullet with N565 and get 3023FPS with the same exact powder charge. We have tested the 215gr Bergers with 80-81gr of N570 and it easy to get that kind of speed with no pressure issues.
Not saying the PRC can't hang. But from what I hear there have been several revisions on the reamers uses since the PRC is showing pressure sooner than the WM. I haven't looked into it too much since I already have the WM and don't need all 3 30 cal magnums for the AI.
The angle allows you to adjust the rear bag or rear of the rifle and adjust your POA on target. Like squeezing your rear bag to adjust butt heightMaybe I don’t understand how those are used but it seems to me that having an angle on the bag rider means when the gun recoils the back goes down and muzzle goes up. How is it possible to see trace or impact with an angle like that?
That one was beautifully windy towards the end of the day lol.Every single one of the two matches I’ve shot at Frontline have been beautiful.
View attachment 8385830
Maybe I don’t understand how those are used but it seems to me that having an angle on the bag rider means when the gun recoils the back goes down and muzzle goes up. How is it possible to see trace or impact with an angle like that?
That one was beautifully windy towards the end of the day lol.
What squad? I'll bring my AT out next time you go.
Yes sir. About 1hr east of Raleigh.Didn't realize you were in NC, was a hell of a windy day albeit wasn't shooting. AT east coast gang
Yes sir. About 1hr east of Raleigh.
Say whenRaleigh myself, need to setup a shoot then. With non matching skins.
I think you mentioned shooting together last time I went as well, sorry for dropping the ball and not reaching out. I was on Squad 2, it was a great group!That one was beautifully windy towards the end of the day lol.
What squad? I'll bring my AT out next time you go.
All good bud! I took the TRG out for that match. Needed a shake down event.I think you mentioned shooting together last time I went as well, sorry for dropping the ball and not reaching out. I was on Squad 2, it was a great group!
That looks great. What material did you print with?Midway had a Red AT-X in 6.5CM at good price, impulse buy and now it's sitting next to me.
I always liked angled bag rider, so I can adjust the rifle not only via squeezing the bag, but also by moving the bag front and back. The bottom is smooth enough to easily slide the bean bag forward band backward to adjust height, yet has enough friction to hold the rifle in place how you left it.
![]()
![]()
![]()
That looks great. What material did you print with?
AT is lifeFinally got her home. Chambered in 6.5 creedmoor. Arken EP5, Tier 1 rings with Atlas bipod and spigot.
View attachment 8386686
AT is life
Now get a Steiner T6 3-18 or a Burris XTR3i 3-18 and its money
You mean one of them wish.com things I keep seeing pop up?And can ya barbarian
You mean one of them wish.com things I keep seeing pop up?
Peak suppressor dealer right thereTemu...