300

Well I finally complete my Savage 300 Mag. It took me a while to get enough funds for it, but damn was it worth it. It's a savage 110fp 300 win mag, with SS scope, EGW 20 moa base, IOR heavy duty steel rings, and Stockade Prairie Dog stock. I need to get a Karsten cheek piece now, but other...

Anyone shoot a 300 Win Mag with a suppressor? Im thinking about building a 300 Win Mag, CRUSADER style and put a surefire on it. Thinking maybe a 18.5 or 20" barrel. I was also wondering has anyone shot a 300 Win Mag with a surefire muzzle brake on it. Does it work fairly well and what would...

has anyone else heard anything about this? why would they make this transition i understand it wouldnt take much to switch the rifles over since they are already long actions but 308 is as accurate as anyone could ask for and considering snipers engagements are usually close the extra power...

I have been curious of the ballsitics of the new 220/300 WM load. I was going to build a 284 Winchester for 1000+ yds, then thought twice after seeing the new 300 WM load. However...after running numbers, the 284 Win will equal or better ( depending on load) velocity, drift and energy up to 1500...

not the best but had some crazy winds, 10 inch steel at 1453 yards. using a gps to range, shooting a 208 gr. A-Max the 2 hits in a row was nice,need a better rest next time http://www.youtube.com/watch?v=MTcAXsj--CQ

Only 2 calibers I am interested in due to various issues which one the best for long range 800 to 1000 thanks

I did a search already for this topic but it didn't turn up the info I need. Basically, I have a 300WSM (custom rifle) with a 1:10 twist barrel. This rifle shoots sub .5 MOA at 100 yards with Sierra 180 MK bullets. The problem is every time I try hunting bullets the groups open up to 1.5-2.0...

I have a Benelli semi-auto in a 300 Win Mag, I would like to do some reloads for it using 180 grain bullets. I understand that loads for a semi-auto are some what different. Can some one explain some of the differences. I thought of using H1000 powder & Federal 215LR Magnum Primers. Thanks in...

For those of you who have been tinkering with the .300 Norma mag. Please be aware that there are two sets of dimentions out there. The originals from Jimmy Sloan, and the revised dimentions dictated by CIp (etc). The revised case has slightly more taper and is 1,02mm longer than the original...

Hi I have a problem with my Stiller Tac 300 action The problem is with crated primers. The caliber is 300 WinMag Have changed the original firing pin spring with a harder Tubbs speed> lock firing pin spring and measured the dia of the firing pin hole in the bolt and as well measured the dia of...

Does anyone have the minimum and the maximum data with this combination? My Hornady book doesn't show the 208's. Has anyone hunted with these? Thanks

Do any of you know if they make these seasonally or what? I cant decide whether I should gunbroker one for 100 more or order one locally from impact but I have no idea how long the wait is. Do any of you know?

Hello everyones, I've just send my rifle to the gunsmith to re barrel it. I've bought a trueflight eavy palma 34" blanck barrel. the twist rate I've choosen is 1/10. my question is as long as there is 34" to decide on, what lenght should I say to the gunsmith for a perfect built for long...

I have a milspec 300 win mag and could use some help on ammo selection.I will use the gun mostly for hunting and some long range shooting.Thanks for any help.

I have trying to figure out what caliber to build a 1500 plus rifle in. In looking at the drop tables from Later's site it looks like the .338 Lapua table only has 40 inches less drop at 2K when compared to a .300 win mag. Am I missing something? Are those two rounds really that close in...

Looking for a .300 Win Mag chamber reamer for 220 gr. SMK at AICS mag length. Any suggestions?

I have recently extracted a heavy-barreled 300 Win. Mag from the back of my gun safe that was barreled in 1996. I shot it about 50 times and it lost favor to the other toys. At the time I semi-retired it, I had settled on a load of 69.0 grains of IMR 4350 behind a 180 grain Sierra SBT...

They have a special with them and was wondering if you can make a 300 wsm out of a long action/ Thanks

Uh, when did SWR start rosette welding the Omega 300? One I ordered came in yesterday and it is rosette welded like an AAC. FUGLY.

just got my 7mm saum from benchmark barrels. in cant wait to try it out. problem is when i size my norma 300 saum brass down to 7mm it leaves a rinkle at the base of the neck . im usung redding bushing dies. the neck die and the fl die do the same thing .do i need to use non bushing dies ? or...