action

Hell again ... I have an "A" serialled Remington 700 action I will be using for a .223 project: I have two questions: 1/ Are these earlier actions the same dimensions as other 700 short actions, and will all pictatinny rails fit them? 2/ What are those two screws towards the rear of the...

I am needing a good after market stock for my Ruger M77 Mauser action 7mm. Any help would be much appreciated.

Where have some of you sent yours to have Cerakote applied? I have a barreled action and bottom metal that I would like to have Cerakoted in flat dark earth. There are 2 types, I would like the type where the barreled action is heated and then the coating applied.

Looking to pick up a .45LC single action (I reload). Colt is the classic and Ruger seems to be the modern standard. What are you guys shooting and your experiences. Barrel length recommendation? It will be for plinking and camping trips mostly. No games at this time but never know if a...

Does anyone know what thread size the action screws are on a rem 700?

Does a Remingtom WSM receiver (used for a custom 7wsm) need to have the feed ramp altered to feed 180 bergers out of an AICS mag? TIA

I just bought a real nice 95% + condition remington 700 bdl in 243. The rifle's action has no prefix in the serial number. The way i understand this is an older receiver. Maybe from the 60's. I was doing a bit of reading and read were the scope mounts of today will not fit properly on the older...

First real post on here guys so try and take it easy on me... Just wondering if any of you guys know if a CZ550 action can be inletted so say an Ai stock, or if anyone over in the States makes a decent 'tactical' stock for such an action. I bought the rifle used just to get the action, was...

I'm working on a project that's based on using a 700 BDL magazine for a 30-06. The local place has a pair of 710 mags for 30-06 at 15 bucks each. Will they fit a Rem 700? I don't think they will, but before I write off the cheap mags, I figured I'd ask the guys here who might have one.

I have done several push feed actions but have never done a claw or controled feed action re-barrel. What is the best way to time and chamber with the extractor cut out. Thanks

I have noticed on one of my rem 700 that i have had blueprinted that after a dry fire the bolt seems a little stiff to open. On my factory rem 700's this isn't the case. Is this a good thing? I know the man that did the work is good to go so i am not to worried, just curious i guess. Like I said...

I have been looking at some different rem 700 short actions for a 20BR build i am thinking of doing. Anyway while looking at a few different rem 700 actions i saw something that i dont ever recall noticing before. The rifle was a 222rem. the receiver was shaped a bit different were the back...

Guys, I have a McMillan stock inletted specifically for a Surgeon action, with pillars installed by McMillan. The stock is also inletted for my barrel. I am considering skim bedding the action (with integral recoil lug) before I fit my barrel to the action. Any reason why you wouldn't...

Just curious. Can an AR10 outshoot a bolt action? if not, what would it take to do it.

Anybody got one to give me measurements?

If anybody has a switch barrel setup on this action how do you like it and how well is it working for you? Thanks in advance.

Anybody had their rifle built on this action yet? I know the first run only had 100 actions available but would like to see the finished product. Ed

I tried the search with no luck!!! Now I need some info on these actions. I know this has been talked about but the search isnt showing me anything at all. Are these a good action? better or worse or the same as a rem 700? is the trigger any good? What stocks are available for these action. I...

I have a .30-06 with mcmillan stock etc. What would it take to change it to a .338 lapua? I have tried to find out if they take the same length action but couldn't. I know the bolt face would be different.

I need to get a factory spec sheet on the 700 action. I am particularly interested in the OD dia / Rad both front and rear since they are different from each other. Thanks.