• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

338 Norma

G

Guest

Guest
midgetoramaXGunny Sergeant
Rating: 3.1/5 this site
864 posts this site
338 Norma Loads
10/20/2014 Last edited 10/21/2014 by midgetorama
I am shooting a 9.5 twist Bartlein that finishes at 26".

With a 300 grain SMK I am getting slight ejector marks with 85.0 grains of IMR 7828 SSC and a CCI250 with Norma brass. Velocity is only 2715 fps.

The best accuracy with this bullet, powder, primer combo is 82.5 grains at 2632 fps. Single digit ES.

I am seating the bullet with a 0.025" jump.

I was expecting better velocity. I may try Retumbo eventually.
Rate now:
midgetoramaXGunny Sergeant
Rating: 3.1/5 this site
864 posts this site
Re: 338 Norma Loads
10/23/2014
300 SMK
GM215M
88.5 gr H-1000
COAL 3.565"
2690 fps with 12 fps ES over 10 shots
~0.233 MOA at 300 yards
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
10/29/2014 Last edited 11/03/2014 by xdeano
Thank you for getting with us at Berger Bullets. We are glad to forward our updated Berger Load Data for use with your .338 Norma Magnum.

.338 Norma Magnum
300 Grain, PN: 33556 Bullet, CIP 3.681" COAL, 26" Barrel. 5/28/2014 RB
BulletPowderStart Load In GrainsApprox. Start VelocityMax. Load In GrainsApprox. Max. VelocityFill Ratio
300 GrainMagpro80.0249784.0261893%
300 GrainRE-3391.0254495.52689102%
300 GrainH-100081.5248085.62603102%
300 GrainRetumbo85.5253189.92655105%
300 GrainNorma MRP 281.0249785.32624100%
300 GrainViht. N57086.5254891.02694101%



Please do not hesitate to get back with us if we can be of further assistance for you.



Kind Regards,

Berger Bullets Technical Support Team

[email protected]

----------------------------------------------------------------------------------------------------------------------------
Hope this load info from Berger would help someone out.
Xdeano

Rate now:
waveslayerXGunny Sergeant
Rating: 3.2/5 this site
855 posts this site
Re: 338 Norma Loads
12/04/2014
300 SMK

3.60

Fed215

Retumbo 87.5

Velocity at 2712 SD=8

DTA, 22" .338 Norma Mag AI, a damn tack driver

Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
12/15/2014
For those of you shooting Cutting Edge Bullets.

.338 Norma Mag. 225 gr, Cutting Edge, MTH D62 SF

O. A.L: 3.681" = 93.50 mm Barrel: 28.0" = 711.2 mm

!!! - YOU MUST START 6 grains UNDER LISTED, and WORK UP - !!!
PowderLoading RatioCharge (Grn)Vel. (Fps)Prop.BurnEST max psi
Vihtavuori N560102.593 .5317099.763000

Ramshot Magnum (Big Boy)104.9100.23169100.063000

Accurate MAGPRO102.897.5316499.063000

IMR 7828 SSC101.292.8315699.863000

Alliant Reloder-22102.892.83140100.063000

Alliant Reloder-25108.095.93138100.061443

Vihtavuori N570108.0101.7310596.454345

Alliant Reloder-1999.789.03095100.063000

Hodgdon H4831 SC100.991.0307499.463000

IMR 435097.583.33069100.063000

IMR 483199.685.13032100.063000

Hodgdon Hl000108.095 .4302299.455473

Hodgdon Retumbo108.096.92967100.048127


Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
12/15/2014
.338 Norma Mag. 252 gr, Cutting Edge, MTH D65

O.A.L: 3 .681" = 93.50 mm Barrel: 28.0" = 711.2 mm

! !! - YOU MUST START 6 grains UNDER LISTED, and WORK UP - !!!

PowderLoading RatioCharge (Grn)Vel. (Fps)Prop.BurnEST max psi
Vihtavuori N570

108.097 .6

300198 .057844

Ramshot Magnum (Big Boy)103.494.8

2997100.063000

Vihtavuori N560100.988.3

299699.963000

Accurate MAGPRO

101.292.2

299399.563000

IMR 7828 SSC99.787.7

2982100.063000

Alliant Reloder-25107.091.2

2979100.063000

Alliant Reloder-22101 .287.7

2964100.063000

Hodgdon H1000108 .091.5

290599.958589

Hodgdon H4831 SC99.486 .1

290599.863000

Hodgdon Retumbo108.093.0

2859100.051060


Rate now:
Thrust911
Thrust911.jpg

XFirst Sergeant
Rating: 3.4/5 this site
2180 posts this site
Re: 338 Norma Loads
02/25/2015
Any more load info to share? Particularity the 300gr Hybrid on top of H-1000?
I'm interested in velocity people are seeing out of 26" to 27" tubes.
Rate now:
TheflyingpoleXCorporal
Rating: 3.1/5 this site
60 posts this site
Re: 338 Norma Loads
02/27/2015
Any one try US869. 1smalljohnson told me to give it a try. I've just started messing with it. The highest I went was 99 grains and if I remember correctly I was in the mid 2700s. This was with a Berger 300 out of a 26" barrel. I'll post more after this weekend hopefully.
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/11/2015
Im pushing the 300 otms at 2785fps.
88.7grns h1000
Fed 215mag primer
In a 26" tube, suppressed.
It shoots very well at a mile.

Xdeano

---------------------------------------------
--- Thrust911 wrote:

Any more load info to share? Particularity the 300gr Hybrid on top of H-1000?
I'm interested in velocity people are seeing out of 26" to 27" tubes.

---------------------------------------------
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/11/2015
I have a good buddy that is using us869 in his 300rum pushing 230s. Ive thought about it, but what he is running into is a lot of carbon buildup, carbon ring.

If a guy is looking for a powder, definitely give rl33 a shot. Ive ran some of it and it gives excellent velocities.

Xdeano

---------------------------------------------
--- Theflyingpole wrote:

Any one try US869. 1smalljohnson told me to give it a try. I've just started messing with it. The highest I went was 99 grains and if I remember correctly I was in the mid 2700s. This was with a Berger 300 out of a 26" barrel. I'll post more after this weekend hopefully.

---------------------------------------------
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/11/2015
Here is some info on rl33.
97.7grns rl33
300grn berger otm.
215mag
2863fps 26" barrel
3.725" coal - single load.
Es 14.22
Sd 7.00
This gave me a 0.103" center to center group at 100yds.

I did a quick velocity check prior to loading for groups.
1. 95.0grn-2738fps
2. 96.0grn-2788
3. 97.0grn-2732 - velocity dip.
4. 98.0grn-2861
5. 99.0grn-2899 - hard bolt lift

I shot these 5 rounds at 300yds and the resulting group was 2".
Xdeano
Rate now:
BobLSwagger
BobLSwagger.jpg

XFirst Sergeant
Rating: 3.6/5 this site
1419 posts this site
Re: 338 Norma Loads
03/17/2015
How did you manage to fit that much powder in the case with that longgggg 300gr Berger?

Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/17/2015 Last edited 03/17/2015 by xdeano
BobLSwagger wrote:
How did you manage to fit that much powder in the case with that longgggg 300gr Berger?​
It'll fit...

I know it seems like a lot, but the density of the RL33 is higher then say H1000 where you'd have a hell of a time with 90grns.

xdeano
Rate now:
BobLSwagger
BobLSwagger.jpg

XFirst Sergeant
Rating: 3.6/5 this site
1419 posts this site
Re: 338 Norma Loads
03/17/2015
xdeano wrote:
BobLSwagger wrote:
How did you manage to fit that much powder in the case with that longgggg 300gr Berger?​
It'll fit...

I know it seems like a lot, but the density of the RL33 is higher then say H1000 where you'd have a hell of a time with 90grns.

xdeano​
Looks like I'm going to have to give the reloader 33 a shot in my .338 Warthog... (.338 NMAI). I'm currently running 93gr of Retumbo with Berger 300gr OTM's @ 2893fps out of a 28" Bartlein 1:9.3

Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/18/2015
Definitely worth the try. You'll see how dense the 33 is.

xdeano
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/18/2015
Theflyingpole wrote: Any one try US869. 1smalljohnson told me to give it a try. I've just started messing with it. The highest I went was 99 grains and if I remember correctly I was in the mid 2700s. This was with a Berger 300 out of a 26" barrel. I'll post more after this weekend hopefully.​
I've got some data for you on the US869.
90.0 - 101.3grns US869
300grn bullet
@100.0grns = 2710fps

Now this is not my data so start low and work up. Same as usual.

xdeano
Rate now:
Eric608XPrivate
Rating: 0.0/5 this site
5 posts this site
Re: 338 Norma Loads
03/19/2015
Has anyone tried the Lapua 300 grain bullets?
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/20/2015
Whats the question? They will work just fine.
Xdeano

---------------------------------------------
--- Eric608 wrote:

Has anyone tried the Lapua 300 grain bullets?

---------------------------------------------
Rate now:
BonczykXCorporal
Rating: 0.0/5 this site
50 posts this site
Re: 338 Norma Loads
03/24/2015
My 28" Lilja 1-10 got:



2825 with 90,6 grains Norma 217 behind a 300 Berger Hybrid. COL: 3.6393.

2694 with 88,0 grains Norma MRP2 behind a 300 Berger Hybrid. COL: 3.6393.

Rate now:
garandmanXFirst Sergeant
Rating: 3.0/5 this site
1499 posts this site
Re: 338 Norma Loads
04/23/2015 Last edited 04/23/2015 by garandman
89.0 gr of H-1000 with 300gr Berger OTM

3.602 Cartridge Length ... I'm a couple thousandths off the lands.

Averaging close to 2800 fps from 27" bbl.

5-shot groups were 1.125 @ 200 yards.

I managed one 3-shot group at 200y for 0.625" NOT sure I could reproduce it.



I'd strongly recommend Berger boolits across the board. My 6.5 CM loves them too. Super high ballistic coefficient on both calibers.



My Retumbo tests for 338NM were averaging 2715 fps.

Rate now:
gewehrXGunny Sergeant
Rating: 3.0/5 this site
828 posts this site
Re: 338 Norma Loads
06/28/2015
26" bartlein 10 twist,

300 berger, 3.656" oal, 85.0 grains IMR 7977, 2710 fps

Rate now:
NormaMagXPrivate
Rating: 0.0/5 this site
36 posts this site
Re: 338 Norma Loads
07/26/2015 Last edited 07/26/2015 by NormaMag
xdeano

Close to 2900 fps from a 338 Norma out of a 26" barrel?

How is brass life?

I`m building a 338 Norma with a 30" Pacnor 1-9 twist barrel and hoping for 2850 fps with good brass life.

Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
08/03/2015
brass life seems to be good. I'm not running a lot of the rl33. my main load is h1000 which i have previously listed on this page. but with RL33 a guy can get up there in velocity. Just giving the guys some insight. My numbers will vary from others.



xdeano

Rate now:
TheflyingpoleXCorporal
Rating: 3.1/5 this site
60 posts this site
Re: 338 Norma Loads
01/28/2016
Just saw this. Thanks. Life got in the way and I haven't messed with this in ages. Hopefully this weekend.

> xdeano wrote:
> > Theflyingpole wrote:> > Any one try US869. 1smalljohnson told me to give it a try. I've just started messing with it. The highest I went was 99 grains and if I remember correctly I was in the mid 2700s. This was with a Berger 300 out of a 26" barrel. I'll post more after this weekend hopefully.> I've got some data for you on the US869.
90.0 - 101.3grns US869
300grn bullet
@100.0grns = 2710fps

Now this is not my data so start low and work up. Same as usual.

xdeano​
Rate now:
SPAK7XFirst Sergeant
Rating: 3.4/5 this site
1777 posts this site
Re: 338 Norma Loads
06/19/2016 Last edited 06/19/2016 by SPAK7
Bartlein 30" 9:5 twist suppressed
89.0gr H1000 fed 215 Berger 300 otm coal 3.675"
2825fps sd 9
Barrel only has 72 rounds on it. Might see some increase in speed with some more rounds down the tube. We'll see.

Rate now:
Thrust911
Thrust911.jpg

XFirst Sergeant
Rating: 3.4/5 this site
2180 posts this site
Re: 338 Norma Loads
07/05/2016 Last edited 07/05/2016 by Thrust911
Area 419 built Deviant action in AI AX CIP length chassis.
Hawk Hill, 9.3 Twist, 27" tube.

215 Primer
88gr H1000 - zero pressure signs.

300gr Hybrid -- 2773 FPS avg SD 3
285gr Amax -- 2789 FPS avg SD 11.5

Rate now:
Thrust911
Thrust911.jpg

XFirst Sergeant
Rating: 3.4/5 this site
2180 posts this site
Re: 338 Norma Loads
08/16/2016
Settled on 89gr of H1000 pushing a 300gr Berger. Shot it on a ridiculously hot day...occasional ejector swipe, primers look good, no sticky bolt. At 1071 yards it hits steel with authority.

15k off the lands
AVG 2809FPS, SD of 4.3, ES of 9

Also will note that for my barrel the POI is the same for both 88gr and 89gr of H1000.

Rate now:
inferno218XSergeant
Rating: 3.1/5 this site
334 posts this site
Re: 338 Norma Loads
09/25/2016
Has anyone tried any 256 Flatlines yet?

Rate now:
SPAK7XFirst Sergeant
Rating: 3.4/5 this site
1777 posts this site
Re: 338 Norma Loads
09/25/2016
inferno218 wrote:

Has anyone tried any 256 Flatlines yet?​
Not yet but it's definitely on the to do list...the 255 flatliners definitely have my attention for the Norma.

Rate now:
inferno218XSergeant
Rating: 3.1/5 this site
334 posts this site
Re: 338 Norma Loads
10/08/2016
I started working on my Warner 256 the other day and i think i am close to a load. I will have a chrono out next week and will post up numbers with load info.
 
I'm getting ready to start load development on my new 338 norma mag. I will be running the berger 300's and RL33. I was just wondering what everyone else's load looked like running this combo.
 
Rifle Configuration:
  • Action: Defiance Deviant Tactical
  • Barrel: Krieger MTU 9.3T 27"
  • Brake: Thunderbeast 338BA 3/4-24
  • Trigger: TacSport Single Stage
  • Stock: McMillan A5 Adj
  • DBM: Badger M5 CIP
Load and atmospherics:
  • Bullet: 300 gr Berger OTM Hybrid
  • Brass: Virgin Norma Brass
  • Primer: CCI 250
  • OAL: 3.690
  • Seated: -0.015 Jump
  • Powder: H1000 89 gr
  • Velocity: 2,825 fps
  • ES: 5.5 fps
  • 1,000 yds group:
    • 4.42" (3x shot)
    • 5.58" (3x shots)
    • 6.64" (4x shots)
  • Temp: 43°F
  • Elevation: 343'
  • Winds: 5-10E @1,000 yds, 5-10W @ Target
 
Last edited:
  • Like
Reactions: JW74 and Highmark
Like your results, Having a rifle built now similar to yours , same trigger ,Barrel will be a Brux 9.3T 30" , will be using H1000 to star around 87.0 and up from there , were you seeing any pressure signs at 89?
 
  • Like
Reactions: cperazza
I have a question (or favor) for the group. I am making display for my brother who is a sniper. Would anyone be willing to make me 2 inert .300 NM and .338 NM cartridges? I will pay for them. I do have some specifications that I will discuss. Please let me know and thank you guys.
 
Got a little data to add.

Rifle specs:
Rem 700 action
24" Lilja 9 twist #5 spiral fluted
MBM 5 port ti brake
Manners EH-1
March 2.5-25x52

All loads use Peterson brass and fed GM215M primers.

300 Berger EH, H-1000, .020" off (3.685" OAL):

86.0- 2594
86.5- 2613
87.0- 2621
87.5 - 2606
88.0 - 2673

300 Berger EH, IMR7828SSC, same seating:

80 - 2539
81 - 2578
82 - 2615
83 - 2662
84 - 2669
85 - 2714 - near max

285 Hammer Hunter, H-1000, .020" off, OAL 3.833", really long bullets:

87.0 - 2740
87.5 - 2731
88.0 - 2736
88.5 - 2763
89.0 - 2784

Next up for testing is the 265 ABLR, and VV-N570 with listed bullets. May pick up some RL33 to try as well. Have 114 rounds down the barrel now, the barrel should be settled.
20200118_163836.jpg
 
  • Like
Reactions: JW74
Some Recent Data :


DT SRS A1 - 338 NM 26" Factory Barrel
Short throat for the factory DT's for some reason , but they still work well

300 Berger OTM- Norma Brass - Federal 210 GM Primer - 87gr Retumbo / AR2225 / 2.745" CBTO /
2740 FPS - Magneto speed

285 Hornady ELD-M- Norma Brass - Federal 210 GM Primer - 88.3gr Retumbo / AR2225 / 2.710" CBTO /
2770 FPS - Magneto speed

both loads shoot in 4-5 SD's , and shoot really well down range
 
Some Further Testing using 2217/h1000 powder
testing from my DT SRS A1 338NM 26" factory barrel 1:10

338NM DATA.jpg
 
Last edited:
I haven’t seen a ton of info on the Berger 250 elite hunters for the 338 Norma. Seems like a better fit for the case capacity over the 300 grain pills. I’ve got a brand new Norma and it is throated for the 300 grain Berger’s but I’ll be starting with the 250s. Starting at 83.5 grains of h1000 as I can’t find much info to start at. so we will see how it goes this Wednesday. Will post results and here and hope some more people post theirs. Also thinking of trying the 260 or 246 hammer hunters with h1000 for a dedicated hunting load on this, and was told by hammer to start at 88 grains
 
Just got into a 338 NM and slowly gathering load info before my rifle shows up. What kind of brass/barrel life are you getting ? And with the current powder shortage does anyone have a good load for the 285 eldm with RL22 (I’ve got a lot of that for my 300wm but nothing else).
 
I'm on 6 loads with Norma brass , that includes load development so a few hot ones in that pile . Working really well so far single digit SD's and great Velocities as you can see in my table
 
  • Like
Reactions: CATM15
Has anyone used 230 eld-x with Reloader 22? Just looking for a starting point and work my way up.
 
I've shot the 250 Berger OTM behind 90gr of Retumbo and 88.3gr of h1000. It shot excellent but I preferred heavier
 
So, I.ve been here for awhile so I might as well start sharing some of the data I've gathered for the 338NM.
Found a load with SW 50BMG and 300g Lapua's.

I know, 3 shot groups, but still pretty happy.

Still need to see how temp resistant this is, but with powder availability thought someone might be interested.

Terminus Kratos action, Brux 30in barrel, Shooters World 50BMG 300g Lapua Secnar, FED 210M , Peterson Brass. 3 shot groups 100yds
Charge WeightAvg vel.SDESnotes
9527201428
95.52735814
96274724.25 MOA
96.52759715sticky bolt lift
 

Attachments

  • thumbnail.jpg
    thumbnail.jpg
    89.2 KB · Views: 82
  • Like
Reactions: Moses42ak and G8TOR
Has anyone worked up any loads with 300 grain SMK’s, CC’s or OTM’s using LRT? Nearing the end of my build and going to start load development.
Thanks
 
I am working up loads with N165 and 300 grain Berger OTMs. I have not seen any load data for this powder, but it is listed as on the Vhit Website as a stable and accurate powder for heavier bullets, especially suited for the 338 LM. Any thoughts on what a decent starting charge would be in a 28" barrel 1-10 twist for 338 NM?
 
dan440 said:
So, I.ve been here for awhile so I might as well start sharing some of the data I've gathered for the 338NM.
Found a load with SW 50BMG and 300g Lapua's.

I know, 3 shot groups, but still pretty happy.

Still need to see how temp resistant this is, but with powder availability thought someone might be interested.

Terminus Kratos action, Brux 30in barrel, Shooters World 50BMG 300g Lapua Secnar, FED 210M , Peterson Brass. 3 shot groups 100yds
Charge WeightAvg vel.SDESnotes
9527201428
95.52735814
96274724.25 MOA
96.52759715sticky bolt lift
Click to expand...
That's an awesome shot group. I did not know you could work up SW 50BMG in 338 NM with that accuracy. Did you have a compressed load at the 96 or 96.5 gr loads?
 
G8TOR said:
That's an awesome shot group. I did not know you could work up SW 50BMG in 338 NM with that accuracy. Did you have a compressed load at the 96 or 96.5 gr loads?
Click to expand...
Not quite, but I'm at 3.618 OAL.
 
Spoke to Bob Blaine, Capstone Precision Group, and got the following load data for Berger 300 OTM with Vit N165.

338 NM
28" Barrel
3.680 COAL
N165 77.0 gr @ 2,561 fps
N165 80.8 gr @ 2,603 fps
96% Case Fill

No data yet for Ramshot LRT, but will share that load date once available.
 
G8TOR you might want to watch the N165 as it hasn’t proven to be temp stable to my shooting buddy. He worked up a good load pushing 300 grain SMK’s in the winter in Fairbanks but when summer rolled around he had crazy pressure signs every time he shot it. Enough to scare him away from using it. Stuck bolt (not sticky but stuck), blown primers etc.
 
Moses42ak said:
G8TOR you might want to watch the N165 as it hasn’t proven to be temp stable to my shooting buddy. He worked up a good load pushing 300 grain SMK’s in the winter in Fairbanks but when summer rolled around he had crazy pressure signs every time he shot it. Enough to scare him away from using it. Stuck bolt (not sticky but stuck), blown primers etc.
Click to expand...
Appreciate the good G2. Do you know if he was using a compressed load?
 
I don’t believe he was compressed, but close. He was running them at 2,750 FPS with 86.6 grains of N165
 
Moses42ak said:
G8TOR you might want to watch the N165 as it hasn’t proven to be temp stable to my shooting buddy. He worked up a good load pushing 300 grain SMK’s in the winter in Fairbanks but when summer rolled around he had crazy pressure signs every time he shot it. Enough to scare him away from using it. Stuck bolt (not sticky but stuck), blown primers etc.
Click to expand...
If your sporty enough in the cold even the best temp stable powder probably won’t like the heat.

In my 7 saum and 338 edge it’s had pretty good success at a mild temp speed gain.
 
Moses42ak said:
G8TOR you might want to watch the N165 as it hasn’t proven to be temp stable to my shooting buddy. He worked up a good load pushing 300 grain SMK’s in the winter in Fairbanks but when summer rolled around he had crazy pressure signs every time he shot it. Enough to scare him away from using it. Stuck bolt (not sticky but stuck), blown primers etc.
Click to expand...
Moses42ak,

I'm shooting in Florida where temp stability is not an issue. As long as you keep your powder and primers in the house during summer. You can shoot pretty much all yea long and never expect your ammo to vary from 72-80 degrees, unless you have your rounds sitting in the open sun.
 
got some free time this weekend and work up some load development with lighter bullet.

250smk 88.2 RL 26
Avg 2925, ES 10 after 8 shots. No pressure sign at all, easy bolt lift.

going to try the badlands 255gr high BC bullet later.
 
Jakeweb09 said:
I haven’t seen a ton of info on the Berger 250 elite hunters for the 338 Norma. Seems like a better fit for the case capacity over the 300 grain pills. I’ve got a brand new Norma and it is throated for the 300 grain Berger’s but I’ll be starting with the 250s. Starting at 83.5 grains of h1000 as I can’t find much info to start at. so we will see how it goes this Wednesday. Will post results and here and hope some more people post theirs. Also thinking of trying the 260 or 246 hammer hunters with h1000 for a dedicated hunting load on this, and was told by hammer to start at 88 grains
Click to expand...
Jake, what did you end up settling on? I’d like to hear what you found out as I’m shooting 250gr otm’s using h1000. Any info would be great! Thanks!
 
Justgoingdownrange87 said:
Jake, what did you end up settling on? I’d like to hear what you found out as I’m shooting 250gr otm’s using h1000. Any info would be great! Thanks!
Click to expand...
Gosh it’s been sometime since I worked with this but if my memory serves me correctly I was a 88.6 grains for with the 250s. They shot right at 1/2 minute and held that out to 900 yards or so. I can’t remember the velocity I ended at but I think it was around 2750. Seemed kinda slow but was very accurate
 
Jakeweb09 said:
Gosh it’s been sometime since I worked with this but if my memory serves me correctly I was a 88.6 grains for with the 250s. They shot right at 1/2 minute and held that out to 900 yards or so. I can’t remember the velocity I ended at but I think it was around 2750. Seemed kinda slow but was very accurate
Click to expand...
Thanks Josh! I’ll work up to and and see what I can get.
 
Not sure if that is viewable or not. If it isn’t, I’m sure I’ll hear about it and find another way to post it.
 
Sweet...Moses42ak! Finally some new data for an impressive caliber. I've been reloading Sig Sauer brass with 76gns 7282ssc, CCI 250, with 300 grn Berger OTM Tactical Hybrids. Shooting out a SPR lathed 30" Bartlein MTU 9.3 two. Shot groups are as expected - taking out Bug eyes!
 
  • Like
Reactions: Moses42ak
Thanks for posting more load data on this!! Shocker for me cuz the load for my bullet selection shows me 3.6gr over max lol

Hornady 285gr ELDM
H1000-89gr
Fed LRRM
COAL 3.675

Velocity 2726fps
SD 7

Works great with no signs of pressure in my rifle.
 
  • Like
Reactions: Moses42ak
I’ve played WAY over what they have listed and way over what I’m sure Alliant would list. I had 2885 FPS with a 300 grain SMK from a 26” barrel. That proved to be a little harsh on the brass. Can’t say that any of it produced viable groups though.
 
G8TOR said:
Sweet...Moses42ak! Finally some new data for an impressive caliber. I've been reloading Sig Sauer brass with 76gns 7282ssc, CCI 250, with 300 grn Berger OTM Tactical Hybrids. Shooting out a SPR lathed 30" Bartlein MTU 9.3 two. Shot groups are as expected - taking out Bug eyes!
Click to expand...
How is the Sig Brass?
 
Really sweet. I will tell you case dimensions are as close to spec as you can get. They don't box them like Petersen or Lapua...(plastic resealable bags. but I am on my 3d reloading with them and I am satisfied so far. I bought them from Bayou Brass and Ammo and they were just shy of a $1.50 a case.
 
  • Like
Reactions: Moses42ak
G8TOR said:
Really sweet. I will tell you case dimensions are as close to spec as you can get. They don't box them like Petersen or Lapua...(plastic resealable bags. but I am on my 3d reloading with them and I am satisfied so far. I bought them from Bayou Brass and Ammo and they were just shy of a $1.50 a case.
Click to expand...
Thank You!
 
Moses42ak said:
I’ve played WAY over what they have listed and way over what I’m sure Alliant would list. I had 2885 FPS with a 300 grain SMK from a 26” barrel. That proved to be a little harsh on the brass. Can’t say that any of it produced viable groups though.
Click to expand...
 
What would you all think about starting at 85.0 gns of Retumbo with 300 gn Berger OTMs in a 30 Barrel with an additional 9 inches suppressed?
 
You must log in or register to reply here.

Similar threads

Crazybaby13
.338 Norma Mag Reloading Data
Replies
3
Views
227
Crazybaby13
Crazybaby13
MOUNTIC
SOLD Sold. 338 Norma Magnum, Norma Match Ammo. 300gr SMK. Cheap
Replies
3
Views
267
MOUNTIC
MOUNTIC
6.5 GUY
SOLD SAKO TRG-42 chambered by GAP in 300 Norma
Replies
8
Views
854
thejeep
thejeep
W
Powder recommendations for 55 grain Hornady CX in 223/556
Replies
6
Views
670
secondofangle2
secondofangle2
harry_x1
Help reading pressure signs on fired brass
Replies
45
Views
2K
Yondering
Y
Top Bottom
Back