I haven't tried TBH
Currently running my Vudoo in a MDT Elite
Currently running my Vudoo in a MDT Elite
what length barrel and does it balance on a barricade?View attachment 8334602
Ready for fun
Here was their reply from October of last year....don't hold your breath!Has Vudoo mentioned an updated timeline for the 15 round magazines? I mainly care about the adjustable feed height anyway.
Has Vudoo mentioned an updated timeline for the 15 round magazines? I mainly care about the adjustable feed height anyway.
If you're just looking for the adjustable feed height then try the Elite mag, it's 14rdsHas Vudoo mentioned an updated timeline for the 15 round magazines? I mainly care about the adjustable feed height anyway.
I'm curious what it will be like. At this point we're seriously looking at launching our own billet magNo updates to the ETA when I spoke with them last about my order (maybe 2 weeks ago). I'm guessing we'll see it on their media feed when they're ready. Even tried to pre-order some and they said that was a no go.
I'm curious what it will be like. At this point we're seriously looking at launching our own billet mag
I ordered one this past Thursday to try out in the meantime. I don't think it's shipped yet but hopefully it will soon.If you're just looking for the adjustable feed height then try the Elite mag, it's 14rds
You will like them, I've ran about 350-400 rds through mine and they have works very well.I ordered one this past Thursday to try out in the meantime. I don't think it's shipped yet but hopefully it will soon.
Two thirds of the company is at the hospital welcoming the newest member so shipping has been slightly delayed. We think things will start going out again either Thurs or FridayI ordered one this past Thursday to try out in the meantime. I don't think it's shipped yet but hopefully it will soon.
Hello!
I took the Vudoo out for the first time this morning and WOW! These things live up to the hype (at least to someone that came from a CZ455). Had about 10 shots to confirm zero and went into testing 4 lots of ammo (Tenex, Center X and SK rifle).
One of the CX lot had the lowest SD and what seems to be the best group so I’m going to start shooting with that lot first. I’m anssuming that’s how people pick lots without over thinking it?
I was amazed at 10-shot groups at 50 yards an average shooter like myself was shooting. I’m 100% satisfied with this set up so far. It was worth the wait. Shout out to Jill and their team @ VGW, she has been awesome to work with.
-DL
How long is your 1.2" barrel?
I have the full set of internal and external weights on there. It’s my heaviest rifle without a doubt.You have internal weights in the chassis also? Going to toss my 24" in a Matrix Pro when it comes in and was wondering.
I have the full set of internal and external weights on there. It’s my heaviest rifle without a doubt.
I did manage to balance it perfectly on a bag/tripod. Sat perfectly still about 2” in front of the magwell.
———-
I do need to adjust the mag catch. For two of the mags, it wasn’t seating correctly so I had to apply some upward pressure for it to feed. Easy fix and was pretty much the only hiccup today.
I’ll have to tinker with it after testing it out on the field vs shooting off a bench. I’m looking forward to the next trip out. Hopefully a NRL practice that allows me to maneuver with itDamn man! Thing must be 40 pounds! LOL Surprised you needed that much weight out front. I had my 23" in a Matrix Pro I bought used and it had 4 weights inside in front and it balanced pretty good. Might have been able to use two outer weights or the kit the sell to take some weight off the back to be perfect.
I was lucky as the one I got had been used with a Vudoo so mag catch was perfect. It looks like an easy adjustment though.
You have internal weights in the chassis also? Going to toss my 24" in a Matrix Pro when it comes in and was wondering.
Went a different way.
Threw my 360 in a XLR Element magnesium chassis.
Balance is on point, almost front heavy. I need to put it on a scale, but it's much more manageable weight wise than my matrix pro with additional weights.
I do miss wider forend tho...
View attachment 8361048
It feels great!I will say the Matrix Pro and 24" Barrel are quite hefty and I wouldn't mind losing a couple lbs off it. I actually just picked up a Manners PRS-TCS to see if I can drop a pound or two overall. I decided I really like the feel of the Manners stocks after handling our other rifle side by side with the Matrix. Guess we'll see how it really feels after I get it put together though.
I will say the Matrix Pro and 24" Barrel are quite hefty and I wouldn't mind losing a couple lbs off it. I actually just picked up a Manners PRS-TCS to see if I can drop a pound or two overall. I decided I really like the feel of the Manners stocks after handling our other rifle side by side with the Matrix. Guess we'll see how it really feels after I get it put together though.
Did you take any of the weights out of the Matrix? With all the internal and the two outside weights it added a lot of weight. You can lighten the rear with their new kit to do so and it might work for you. Worth playing with.
The TCS will also work. This is mine with a 23" 1.2" barrel and it balances pretty well and is under 20 pounds.
View attachment 8361763
I played around with my 23'' in a MPA over the weekend and took off about 3lbs!Did you take any of the weights out of the Matrix? With all the internal and the two outside weights it added a lot of weight. You can lighten the rear with their new kit to do so and it might work for you. Worth playing with.
The TCS will also work. This is mine with a 23" 1.2" barrel and it balances pretty well and is under 20 pounds.
Looks really good! So selling the Matrix soon? Lol
Oh oh that’s sweet! And also one of the very short list of stocks with a shorter grip-to-trigger distance. The other being that same stock with a butt hook (U-10) and KWM’s Sentinel. In chassis rifles, AI has it right as well.My stock finally arrived! McMillan U10-7 with LH V360 and a 22" bartlein MTU.
View attachment 8374004
View attachment 8374005
That’s an interesting color. Wondering what it is? I was torn between MPA’s standard blue and red. Went with red. Brenda says it’s ok but she really does not care for the color. I think it looks great with the black accepts, Just like Yours. My difference, is, I needed a lightweight rifle. My two 6GT’s weight right at 19 pounds. So, with the lightweight chassis and the thinner barrel profile, I am at 12 pounds, one once. Much nicer on my 75 year old shoulder. So, Brenda was ok with what I spent If, I got a lighter rifle.I have the 24 inch 1.20 in a Matrix Pro. I have 3 internal weights and the steel spigot and balances perfectly (IMO - about 2.5 inches in front of the bag stop). It'll balance without them okay, but it'll tip back off a bag with a little pressure or bumping. You could easily get away with 2 external weights instead of the 3 internal. I just liked the look more without the external.
View attachment 8360772
View attachment 8360782
This is also with a 39oz scope. Rifle weighs in at ~19lbs.
That’s an interesting color. Wondering what it is? I was torn between MPA’s standard blue and red. Went with red. Brenda says it’s ok but she really does not care for the color. I think it looks great with the black accepts, Just like Yours. My difference, is, I needed a lightweight rifle. My two 6GT’s weight right at 19 pounds. So, with the lightweight chassis and the thinner barrel profile, I am at 12 pounds, one once. Much nicer on my 75 year old shoulder. So, Brenda was ok with what I spent If, I got a lighter rifle.
Have you dryfired it much? Mine is a Gen 1.2 I believe and I had a similar issue (only while no magazine was in). Vudoo warrantied it for free (paid for shipping too) and basically did a setback on the breach + switched out some stuff on the bolt. Something about how the breachface / bolt combo was causing a burr to develop on the bolt that caught on the ejector. I'd call Vudoo and ask if your issue could be the same.Well guys, this is odd, couple years back I bought a vudoo from a guy on the hide, it was slick and ran like butter, fast forward a couple years and after not shooting it for awhile I got it back out and the little bolt guide on the bottom is catching on the back stroke and closing stroke when the bolt handle is lifted, just about makes it unusable. I know things like this dont happen sitting in the safe, but im lost at what I did to cause it. Video will be attached to show what's going on. Any help would be appreciated.
0 new items by vance koehn
photos.app.goo.gl
I have definitely dry fired it, I would say couple 1000 times if not more, I figured I would give them a call if a easy fix didn't come up here. I will add it is marginally better with a mag but still is very annoying.Have you dryfired it much? Mine is a Gen 1.2 I believe and I had a similar issue (only while no magazine was in). Vudoo warrantied it for free (paid for shipping too) and basically did a setback on the breach + switched out some stuff on the bolt. Something about how the breachface / bolt combo was causing a burr to develop on the bolt that caught on the ejector. I'd call Vudoo and ask if your issue could be the same.
You are influencing the bolt over to make it hit that way.Well guys, this is odd, couple years back I bought a vudoo from a guy on the hide, it was slick and ran like butter, fast forward a couple years and after not shooting it for awhile I got it back out and the little bolt guide on the bottom is catching on the back stroke and closing stroke when the bolt handle is lifted, just about makes it unusable. I know things like this dont happen sitting in the safe, but im lost at what I did to cause it. Video will be attached to show what's going on. Any help would be appreciated.
0 new items by vance koehn
photos.app.goo.gl
Mine is 1706 I'll call vudoo.I'll just add that if your action isn't an early Gen 1, the issue I had is probably not the one you're having. Mine is a serial # in the 1900s, which isn't that early but still decently early. I believe they fixed the issue I had on all their actions at a certain point, probably before the Gen 2.
Why does it offend you if my rifle gets dirty? You take a close up video with camera light on and see if yours looks much better. I buy my rifles to shoot and use not to clean and pamper. Also answers like yours don't help problems. It a way of trying to tell the asker your dumb im smart. Btw I was trying to rock the bolt to test the extremes but if you say for one second how it is catching is normal i can wright you off. Typical internet stuff.You are influencing the bolt over to make it hit that way.
*** Clean your damn gun!!!!! ***
I'm not going to armchair diagnose but definitely call them and let us know what they say. They did a barrel setback for me in the fractions of an inch and changed the breach to better accommodate dryfire. Plus changed out a part or two on the bolt itself that had developed the burrs. It was covered under warranty and they probably had it for 3-4 weeks since at least at the time they were a little backlogged.Mine is 1706 I'll call vudoo.