• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Photos Finally.... The AICS AX has landed in Aus.

96C

96C

Sergeant
Full Member
Minuteman
    • Aug 9, 2007
    1,232
    2,121
    Aust
    After 4 months of emails, phone calls, admin, waiting and transport - my new AICS AX 1.5 (fixed stock) has landed.

    20 minutes of fury later, like an IKEA desk it's bolted down and ready to go.

    The machining quality seems perfect, exact and smooth. I've had two AICS stocks in the past and this one has definitely not gone backwards in quality - as to be expected from such a company.

    It came packaged in two bits, the fore end rail system and the rear stock section. Bolt the barrel and action down to the rear half then slide the fore end rail over. 10 fastening screws connect the two - rock solid, the threads were TIGHT so you have to be careful and smooth.

    I jacked both wrists doing Army related things, the ergonomics of the awesome McMillan A5 I've been running the last almost 3 years was getting to me so switched it out for the pistol grip.

    It cost a small fortune but I'm very happy so far!

    Looking forward to hitting the hills, will keep you posted lads.
    J
     
    Re: Finally.... The AICS AX has landed in Aus.

    Ive heard in australia that kangaroos are like our praire dogs, is that true? Nice rifle.

    Rich
     
    Re: Finally.... The AICS AX has landed in Aus.

    Yeah nice work bro, be interesting to see group size change from the bedded McMillan to the chassis.. If any.

    JJ
     
    Re: Finally.... The AICS AX has landed in Aus.

    A little while back I met up with Tom Irwin and checked out the AX chassis at their state-side shop, I was very impressed. I might even consider swapping out my current AICS for an AX but think I'll hold off for another build.

    The AX is a sweet piece of kit.

    Great looking set up and looks like your ST10 is holding up well too!
     
    Re: Finally.... The AICS AX has landed in Aus.

    Nice rifle mate. Is that a 20" bbl? Also, is the LOP system still spacers or does that 'button' (not sure if it is one) on the side depress and enable you to extend the guts out?
     
    Re: Finally.... The AICS AX has landed in Aus.

    Nice stick very nice, expect an email on how I can get one myself... ow and pics of the weekends escapades...
     
    Re: Finally.... The AICS AX has landed in Aus.

    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SSG3K</div><div class="ubbcode-body">Ive heard in australia that kangaroos are like our praire dogs, is that true?</div></div>

    They're a big problem in some parts of Australia, I live down south and they're all over the rural areas... You can only shoot them with a permit though, they're a protected species like most other animals here.


    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Toddcal13</div><div class="ubbcode-body">What vest is that? </div></div>

    Base platform - SORD Chest Rig Front
    Left to right -
    1. Platatac pull out med pouch
    2. SORD Accessories small (PALS cut off front)
    3, Platatac large accessory pouch (PALS cut off front)
    4. SORD 60 round tuck buckle
    5. SORD Accessories small (PALS cut off front)
    On the chest -
    1. Platatac FUP pouch for Leatherman
    2. SORD Admin pouch
    3. Field dressing

    Gets the job done... Data book slides into the rear plate pocket out of the way but easy to get to.


    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tshakabika</div><div class="ubbcode-body">Nice rifle mate. Is that a 20" bbl? Also, is the LOP system still spacers or does that 'button' (not sure if it is one) on the side depress and enable you to extend the guts out? </div></div>

    Thanks bud, it's a Remington 20" varmint barrel still, just had the FTE fitted to the front and re-crowned. Had about 1500 rounds through it, still going strong. Will rebarrel next year to something bigger, probably an MTU fluted 24".
    LOP is still done with spacers, it comes with one thick and one slim spacer with 3 sets of bolts for Big+Small / Big only / Small only / No spacer - which is a nice touch. There seems to be the possibility for the LOP button however it's not fitted.
    Maybe it's a factory addition? Same for the butt spike, it seems ready but it's just not fitted.


    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Flem100</div><div class="ubbcode-body">Nice stick very nice, expect an email on how I can get one myself... ow and pics of the weekends escapades... </div></div>

    No worries mate, I'll try and get out early next week... Work is kicking my arse at the moment!


    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Chiller</div><div class="ubbcode-body">13 or 16" foreend? </div></div>

    The short actions all have the 13" fore end, measured it to confirm. It's still quite long, 16" would be huge.


    Thanks fellas, have a good afternoon. I'll get some pics out from the first shoot and throw them up.
     
    Re: Finally.... The AICS AX has landed in Aus.

    The butt spike & quick adjust butt are available as upgrade kits so can be added to your base chassis at any time you wish.
     
    Re: Finally.... The AICS AX has landed in Aus.

    man, seeing all of these awesome AX rifles is making me want to get one! too bad its not offered in a lefty. . . YET!
     
    Re: Finally.... The AICS AX has landed in Aus.

    <span style="text-decoration: underline"><span style="font-weight: bold">That</span> is a <span style="font-weight: bold">gorgeous</span> rifle <span style="font-weight: bold">and</span> setup</span>!!!
    wink.gif


    Tony
     
    Re: Finally.... The AICS AX has landed in Aus.

    What rail are you using on that 700 action? Seems to cover up the "gap" well.

    If possible could you post a pic of just that part of the rifle?

    Nice set up!
     
    Re: Finally.... The AICS AX has landed in Aus.

    I'll get onto that for you after work mate,

    It's a Nightforce NXS 20 MOA rail.
    Leupold MK4 high 30mm rings.
    ST10 with front end ergo adjustment.

    There's about 1mm gap with the flip covers on, works well.
     
    Re: Finally.... The AICS AX has landed in Aus.

    Can I be a part of your family ? Lol
     
    Re: Finally.... The AICS AX has landed in Aus.

    Nice Kit. Surprised to hear the McMillian A5 was uncomfortable for you, but im such the AICS AX is a beaut.
     
    Re: Finally.... The AICS AX has landed in Aus.

    nice job sir
     
    You must log in or register to reply here.

    Similar threads

    abn_surfer
    SOLD GAP Tempest 6.5 CM in Grayboe Ridgeback Stock with NF NX8 4-32 Mil-C
    Replies
    4
    Views
    490
    abn_surfer
    abn_surfer
    MOUNTIC
    SOLD Sold! Accuracy International AXSA Build project. Like New action and comp trigger. RRS and Sawtooth ARCA plates.
    Replies
    9
    Views
    723
    Precision Underground
    Precision Underground
    A
    Accessories Pre 2014 AX AICS Chassis for Long Action
    Replies
    17
    Views
    1K
    Gonzo300
    Gonzo300
    gr8fuldoug
    Welcome to August at Camera Land
    Replies
    3
    Views
    327
    gr8fuldoug
    gr8fuldoug
    gr8fuldoug
    Optics Welcome to August at Camera Land
    Replies
    3
    Views
    378
    gr8fuldoug
    gr8fuldoug
    Top Bottom
    Back