Just started hunting this year with a .300 WSM. I haven't reloaded any yet as it liked the Black Hills 180 gr Accubond and I didn't have brass. I plan to start reloading in the near future. Anyone have experience with reloading the 300 WSM? I am curious to powders for the short mag case? I typically have RL-15, IMR-4064, H-4895 and Varget on hand. What works best for the 300 WSM?
- Thread starter D Baker
- Start date
- Tags
- 300 powder suggestions wsm
Re: Powder Suggestions for .300 WSM
Thanks for the info on the 4831...any suggestions on die mfg for the .300 WSM?
Thanks for the info on the 4831...any suggestions on die mfg for the .300 WSM?
Re: Powder Suggestions for .300 WSM
I have used H4831 and H4350 to this point with good results, H4350 seems to favor the 190 grain bergers I’m using, as far as velocity is concerned.
As for dies I use a lee collet neck sizing die and a redding body die when it is needed, Im a big supporter of redding's competition bullet seating die and use one for all of my precision rifles.
I have used H4831 and H4350 to this point with good results, H4350 seems to favor the 190 grain bergers I’m using, as far as velocity is concerned.
As for dies I use a lee collet neck sizing die and a redding body die when it is needed, Im a big supporter of redding's competition bullet seating die and use one for all of my precision rifles.
Re: Powder Suggestions for .300 WSM
Info for Nosler bullets:180gr Ballistic tip Accubond and Partition: Ballistic Coefficient:BT/AB(.507)PT(.474)Sectional density:.271. Powder W760 charge weight in (grains) 64.0 3029fps 91% load density,62.0 2933fps 88% load density,60.0 2826fps 85% load density. This is what Winchester is supposedly using in their Factory Loads in the BlackBox labeled Supreme. This is what i got out of my Winchester Model 70 with a factory 24 inch barrel. I use Lee Factory Crimp Dies for resizing and bullet seating hope this helps.
Info for Nosler bullets:180gr Ballistic tip Accubond and Partition: Ballistic Coefficient:BT/AB(.507)PT(.474)Sectional density:.271. Powder W760 charge weight in (grains) 64.0 3029fps 91% load density,62.0 2933fps 88% load density,60.0 2826fps 85% load density. This is what Winchester is supposedly using in their Factory Loads in the BlackBox labeled Supreme. This is what i got out of my Winchester Model 70 with a factory 24 inch barrel. I use Lee Factory Crimp Dies for resizing and bullet seating hope this helps.
Re: Powder Suggestions for .300 WSM
Thanks for the information. Gives me a great place to start. If anyone has loads worked up they would like to share please post.
Thanks for the information. Gives me a great place to start. If anyone has loads worked up they would like to share please post.
Re: Powder Suggestions for .300 WSM
Take a look at the new Reloader 17 as well.
Take a look at the new Reloader 17 as well.
Re: Powder Suggestions for .300 WSM
My 2 favorite loads currently are:
190gr SMK
69.7gr H-4831sc
Fed 210M
190gr SMK
65.8gr IMR4831
Fed 210M
Both of these loads hover right around 2900fps in my 25" Rock tube, depending on the temperature that day.
My 2 favorite loads currently are:
190gr SMK
69.7gr H-4831sc
Fed 210M
190gr SMK
65.8gr IMR4831
Fed 210M
Both of these loads hover right around 2900fps in my 25" Rock tube, depending on the temperature that day.
Re: Powder Suggestions for .300 WSM
my savage 12 fvss prefers 4007ssc for every bullet ive tried, from 110vmaxes to 190mks. others ive used are varget, and the 4350s
my savage 12 fvss prefers 4007ssc for every bullet ive tried, from 110vmaxes to 190mks. others ive used are varget, and the 4350s
Re: Powder Suggestions for .300 WSM
IMR 7828 is a solid performer in my 300WSM
IMR 7828 is a solid performer in my 300WSM
Re: Powder Suggestions for .300 WSM
I used RL22 threw my 300wsm when I had it. Now I use RL22 and H4831scc threw my 7wsm's...
I used RL22 threw my 300wsm when I had it. Now I use RL22 and H4831scc threw my 7wsm's...
Re: Powder Suggestions for .300 WSM
Was using MagPro, but have since switched to RL22.
Was using MagPro, but have since switched to RL22.
Re: Powder Suggestions for .300 WSM
Tag for later
Tag for later
Re: Powder Suggestions for .300 WSM
67grs RE19 with any good 180 grainer.
67grs RE19 with any good 180 grainer.
Re: Powder Suggestions for .300 WSM
RE17 and Ramshot hunter are great powders for the 300WSM
RE17 and Ramshot hunter are great powders for the 300WSM
