• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

  • The site has been updated!

    If you notice any issues, please let us know below!

    VIEW THREAD

My Tikka XLR 6.5 Creedmoor

ddavis

Sergeant
Full Member
Minuteman
May 26, 2011
1,336
229
Texas


This rifle seems a bit cliche with the Tikkas becoming seemingly more popular, XLR stocks becoming popular, and Vortex scopes gaining a good reputation lately. I put it all together last week, and took it to the range with a box of Hornady 140 A-max's to get a baseline. The first 5 shot group was right at 0.5", the next one was right at an inch. I still need to take the time to get the rifle set up correctly with the stock and scope position. Velocity was 2730 fps out of the 21" Bartlein barrel. I plan on putting a mine red-dot on the forward 45 degree rail and sight it in at either 25 or 50 yards. The rifle weighs 13.5 lbs, but I may use it for some limited hunting if I am not walking too far.

The barreled action, bolt, etc. are in the mail on their way to H&M Metal processing to be nitrided. I basically want one rifle that has all the features I want so I can become proficient with it over the next few years. I can't wait to get it back from nitriding and start working up some handloads!

-Dan
 
Re: My Tikka XLR 6.5 Creedmoor

Almost forgot to mention a big +1 to Kyle at XLR. He is patient with any questions you may have, and milled down my scope base for free and got it back to me very quickly. You can't even tell it was modified.

Also, I had MT Guns do the gunsmithing. I wasn't 100% happy with the muzzle threads, so he paid for return shipping, re-did the threads, and even threw in a thread protector the second time around, all in a timely manner.

Also, I know it has been said many times, but Vortex's customer service is also great. The small fiber optic piece on one of my turrets came unglued, and they had a new one to me in a few days.

All in all, I am very happy with the people I bought everything from.
-Dan
 
Re: My Tikka XLR 6.5 Creedmoor

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: steve123</div><div class="ubbcode-body">That's pretty cool!

Great action,cartridge,chassis and decent scope.

Wouldn't you want lower rings though? </div></div>

The one negative to this chassis is that it is difficult to figure out the correct ring height. Those are Warne extra high rings. I believe they are 0.830" high. If I went too much lower, my scope would not clear. The ideal height would be about 0.800" for my setup. It's really a non issue though, as there is a lot of adjustment in the cheekpiece, and I'm nowhere near running out of adjustment.
-Dan
 
Re: My Tikka XLR 6.5 Creedmoor

Your rifle is cliche? Does that bother you? Does it shoot well and feel comfortable for you? It appears aesthetically pleasing.
 
Re: My Tikka XLR 6.5 Creedmoor

WOW!!!! Very nice looking rig.

The color is different... I like it.
 
Re: My Tikka XLR 6.5 Creedmoor

WOW!!!! Very nice looking rig.

The color is different... I like it.
 
Re: My Tikka XLR 6.5 Creedmoor

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cb_tikka</div><div class="ubbcode-body">Sweet stick. How about a new bolt handle? </div></div>

I thought about it, but the factory one works fine and I sent it off with everything else to be nitrided. It will look better when it comes back matte black, but I'm not too concerned with that. The aftermarket bolt handles look nice, but offer no appreciable advantage. The bolt throw of the Tikka is so smooth, I really don't need any extra leverage, and a longer bolt handle would only increase the bolt throw arc distance. I will probably be replacing the plastic factory bolt shroud with an aluminum one though. I hear they have a tendency to crack, though the one on my current Tikka is still fine.
-Dan
 
Re: My Tikka XLR 6.5 Creedmoor

Got it back from being nitrided and put my first set of handloads through it to get an idea of where I need to be with my powder charge. The nitride finish is amazing. I can take the tip of a knife blade to the finish and try to gouge it, with no effect to the gun. The action isn't quite as smooth as my naked stainless Tikka, but I think it will smooth up some with time.

One thing I found with my handloads is that I have to seat them deeper than I'd like. I loaded my first batch at 2.80" because that's what the Hornady factory ammo I previously shot was, and headed to the range without checking them. They wouldn't chamber, so when I got home, I found out I had to seat them to 2.75" to get them off the lands. The only way the factory ammo could have worked is:
A. It is not truly 2.80"
B. The nitriding process added enough thickness to change the leade.

No big deal though. I started to get some pressure signs at 2750 fps, so I will probably shoot the 140 A-max's at 2700. That will get me out to 1000 easily.

Show more

Show more

Show more
 
Re: My Tikka XLR 6.5 Creedmoor

Where did you get it nitrided at, I have never had an issue where it added thickness to the rifle, especially in the chamber. Did you clean throughly after you got it back from the nitride treatment, there may be some salts built up in the chamber.
 
Re: My Tikka XLR 6.5 Creedmoor

1 on the nitiriding shouldn't add material to the action. Is it possible that the smith who reinstalled your barrel didn't use the go/no-go gauges and tightened it a bit too far?
 
Re: My Tikka XLR 6.5 Creedmoor

It was nitrided as a barreled action. Strange isn't it? It chambered the factory rounds before nitriding fine, but my handloads show rifling marks on the bullet at anything over 2.75" I don't have anymore factory rounds to try. I'm going to have to get another box just to see if it will even chamber them anymore. I don't care one way or another, as I planned to reload everything anyways, but it would be nice to seat the bullets out as far as possible to make the most of the case capacity. The big drawback to nitriding is that I couldn't change it now even if I wanted to. Overall, I'm very happy with the outcome and glad I had it done, just curious.
-Dan
 
Re: My Tikka XLR 6.5 Creedmoor

I have a barreled action that needs the same treatment and if it tightened it up a smidge that would rock, could you PM the outfit that did yours? Thanks!!!!!! IN advance....

Edit,,, Never mind google is my friend I found H&M... Cheers


Dave
 
Re: My Tikka XLR 6.5 Creedmoor

I had it done by H&M Metal Processing. If you have any questions, ask to speak to Shade McMillan. He is their gun guy. They were excellent to deal with and got it turned around quick. There were no imperfections that I could see. Be prepared to scrape out a powdery substance from any small holes though. I'm not sure what part of the process produces it, but when assembling my bolt, the ejector and extractor springs would not go back into the holes until I figured out that they were clogged up a bit. A drill bit just small enough to fit in the hole spun at high speed will get everything out of there.
-Dan
 
Re: My Tikka XLR 6.5 Creedmoor

Finally got around to shooting some factory ammo again. I found out that the bullets are seated pretty soft and I'm jamming them in the case when I chamber them. They end up at 2.74", which is also where I'm loading my handloads in order to chamber them. The throat was cut shorter than I'd like, but I suppose that's better than not being able to reach the lands at all.

I'm able to get 2750 fps with the 140 A-max's and got to shoot them out to 1000 yards recently. Once I got everything figured out, I put 4 out of 5 on a 24"x24" plate with wind gusting up to 18 mph. I'm still learning, but happy with my results so far, and the rifle is pleasant to shoot. The last 308 I had weighed ~18 lbs. This rifle weighs 13.5 and has far less felt recoil. I think it is mostly due to the design of the XLR.

-Dan
 
Re: My Tikka XLR 6.5 Creedmoor

Also painted it. I liked the way my hunting rifle came out, so I used the same pattern. It blends pretty well in most areas and honestly I just like the way it looks.

L]
 
Re: My Tikka XLR 6.5 Creedmoor

Very nice setup I really like those XLR stock's.
 
Re: My Tikka XLR 6.5 Creedmoor

I'm not understanding something. You shot factory ammo before it was coated with no issue. Then you had it coated and factory ammo is jamming into the lands now? Doesn't seem right at all. Nice looking stick for sure though.
 
Re: My Tikka XLR 6.5 Creedmoor

No I think the factory ammo was probably jamming into the lands before I had it coated too. I never noticed it in the first 20 rounds because it is seated soft enough that you can't tell you are jamming the bullet, it just felt like a slightly tight chamber.

Apparently the Hornady factory dies give more neck tension, so my handloads did not 'give' when they were seated too long. This is what prompted me to find out my max OAL, which is right at 2.74".

I shoot handloads either way, so it's no big deal, and the extra few fps I would gain from being able to use the full length of 2.80" is insignificant.
-Dan
 
Re: My Tikka XLR 6.5 Creedmoor

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Gman021</div><div class="ubbcode-body">Can you get more pics to better show the camo job? </div></div>







Krylon Khaki, OD, and brown. Do the Khaki as a base layer, then lightly do the OD in places to break up the major pattern. Follow with the brown pattern to further break up outline.
 
Re: My Tikka XLR 6.5 Creedmoor

Don't know whether I like the before or after pic better...both look good!