Anyone using them? I have a set for smaller rifle, but looking\
to put it on 308 and wondering if anyone thinks that's a bad idea.
to put it on 308 and wondering if anyone thinks that's a bad idea.
Rifle Scopes Burris 30mm Signature rings
- Thread starter OldmaninNeb
- Start date
Re: Burris 30mm Signature rings
I have a set of the 30mm Dual Dovetail type on one rifle. They are pretty solid.
I also have a set of 1" Signature weaver style. They fit on a Seekins and TPS rail, but not on a Badger Ordnance rail.
I have a set of the 30mm Dual Dovetail type on one rifle. They are pretty solid.
I also have a set of 1" Signature weaver style. They fit on a Seekins and TPS rail, but not on a Badger Ordnance rail.
Re: Burris 30mm Signature rings
A fellow just set a long-range record with a quarter sized group at 600 yards and I noticed he was using them on his rifle. They are solid, moa adjustable with the inserts and don't leave any scope ring marks.
If your using them on a rifle for rough service they may not be the best choice but I never heard of any moving under normal shooting conditions.
A fellow just set a long-range record with a quarter sized group at 600 yards and I noticed he was using them on his rifle. They are solid, moa adjustable with the inserts and don't leave any scope ring marks.
If your using them on a rifle for rough service they may not be the best choice but I never heard of any moving under normal shooting conditions.
Re: Burris 30mm Signature rings
I have had these rings on my 300 win mag L/R-Hunting rifle for almost four years now. I have never had a point of impact change through three hard hunting seasons, and lots of range and field shooting. I would not hesitate to use these on your rifle.
I have had these rings on my 300 win mag L/R-Hunting rifle for almost four years now. I have never had a point of impact change through three hard hunting seasons, and lots of range and field shooting. I would not hesitate to use these on your rifle.
Re: Burris 30mm Signature rings
I'm using these on my hunting rifle with a SWFA SS 3-9x42, and used the 1" version of these rings with a Nikon scope for a year prior to using these. They work excellent and I've been fairly hard on my rifle, and never had any issues with them moving, coming loose, etc.
I'm using these on my hunting rifle with a SWFA SS 3-9x42, and used the 1" version of these rings with a Nikon scope for a year prior to using these. They work excellent and I've been fairly hard on my rifle, and never had any issues with them moving, coming loose, etc.
Re: Burris 30mm Signature rings
Good deal! I have the 1" rings on a 22 and really like them. Now if I can just find a set with weaver type base and 30mm I'll be offering a set of Night Force rings to whoever is interested.
Good deal! I have the 1" rings on a 22 and really like them. Now if I can just find a set with weaver type base and 30mm I'll be offering a set of Night Force rings to whoever is interested.
Re: Burris 30mm Signature rings
I use them on everything with a scope here.Here's my 5R .308 and my 338Edge. My brother had them on a 375Rum.
I use them on everything with a scope here.Here's my 5R .308 and my 338Edge. My brother had them on a 375Rum.
Re: Burris 30mm Signature rings
I've got them on a .308 aac-sd and a .264 wing mag and they been solid. I really like that I can use them to extend my adjustment range by a decent margin. My brother has them on a .300 win mag and hasn't had any problems.
I've got them on a .308 aac-sd and a .264 wing mag and they been solid. I really like that I can use them to extend my adjustment range by a decent margin. My brother has them on a .300 win mag and hasn't had any problems.
Re: Burris 30mm Signature rings
groan, just got an Email from them saying the 30mm rings will be available in july! (not a lot of marketing strategy there)
groan, just got an Email from them saying the 30mm rings will be available in july! (not a lot of marketing strategy there)
Re: Burris 30mm Signature rings
Scottx88 I'm jealous of your shooting range!
Scottx88 I'm jealous of your shooting range!
Re: Burris 30mm Signature rings
Quantico.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: popgunz</div><div class="ubbcode-body">Scottx88 I'm jealous of your shooting range! </div></div>
Quantico.
Re: Burris 30mm Signature rings
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: popgunz</div><div class="ubbcode-body">groan, just got an Email from them saying the 30mm rings will be available in july! (not a lot of marketing strategy there) </div></div>
We'll see about that... I've had two sets of them backordered since last November and the supply of them had been "drying up" in September-October 2011. I just had to steal one set of medium 30mm Sig Zees off one of my infrequently used rifles to mount a scope on a new rifle that I just picked up.
I use the Signature Zees on all my rimfires & air rifles to give as much elevation adjustment range as possible for long shots; haven't had an issue with the rings even on my .17 that rides along with me and gets bounced around on quads and tractors out in the orchards.
One word of advice is that the Signature Zees come out of the box slathered up in oil. Be sure to wipe all the oil off the inside of the rings and off the inserts otherwise things can shift around a bit.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: popgunz</div><div class="ubbcode-body">groan, just got an Email from them saying the 30mm rings will be available in july! (not a lot of marketing strategy there) </div></div>
We'll see about that... I've had two sets of them backordered since last November and the supply of them had been "drying up" in September-October 2011. I just had to steal one set of medium 30mm Sig Zees off one of my infrequently used rifles to mount a scope on a new rifle that I just picked up.
I use the Signature Zees on all my rimfires & air rifles to give as much elevation adjustment range as possible for long shots; haven't had an issue with the rings even on my .17 that rides along with me and gets bounced around on quads and tractors out in the orchards.
One word of advice is that the Signature Zees come out of the box slathered up in oil. Be sure to wipe all the oil off the inside of the rings and off the inserts otherwise things can shift around a bit.
Re: Burris 30mm Signature rings
Good to know! drat, I hate waiting... my 6mm barrel should be here by then tho. Guess it's .223 time again.
Good to know! drat, I hate waiting... my 6mm barrel should be here by then tho. Guess it's .223 time again.
Re: Burris 30mm Signature rings
Burris told me to expect the 30mm medium signature rings to be shipping to their vendors toward the end of May.
Burris told me to expect the 30mm medium signature rings to be shipping to their vendors toward the end of May.
Re: Burris 30mm Signature rings
Do you know if the 1" inserts fit all or do they have a separate kit for the 30mm?(can't seem to find it)
Do you know if the 1" inserts fit all or do they have a separate kit for the 30mm?(can't seem to find it)
Re: Burris 30mm Signature rings
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: popgunz</div><div class="ubbcode-body">Do you know if the 1" inserts fit all or do they have a separate kit for the 30mm?(can't seem to find it) </div></div>
The 1" kit won't fit.
There's no such thing as a 30mm kit, because 30mm rings already come with extra inserts. They only offer +/-10 for the 30mm rings.
Obligatory pics;
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: popgunz</div><div class="ubbcode-body">Do you know if the 1" inserts fit all or do they have a separate kit for the 30mm?(can't seem to find it) </div></div>
The 1" kit won't fit.
There's no such thing as a 30mm kit, because 30mm rings already come with extra inserts. They only offer +/-10 for the 30mm rings.
Obligatory pics;
Similar threads
