My new Ruger 22/45 22LR with Burris FastFire II and Viridian C5 green laser sight. So far I love it, smooth shooting little pistol, plus its nice being able to put 1911 grips on it. Might put the Volquartsen trigger on it soon. Enjoy!
Got my new plinker put together today!
- Thread starter stillsmokin875
- Start date
Re: Got my new plinker put together today!
That's is a nice little pistol. Bet that thing is fun to shoot with.
That's is a nice little pistol. Bet that thing is fun to shoot with.
Re: Got my new plinker put together today!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Chard</div><div class="ubbcode-body">Nice outfit. Do a Sam Lam bushing. Best $10 you can spend on one of these pistols. Mine runs great with a Spectre.
</div></div>
Is it really that good? I guess for $10 it couldn't hurt to try it.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Chard</div><div class="ubbcode-body">Nice outfit. Do a Sam Lam bushing. Best $10 you can spend on one of these pistols. Mine runs great with a Spectre.
</div></div>
Is it really that good? I guess for $10 it couldn't hurt to try it.
Re: Got my new plinker put together today!
any will work, with a little trimming
i'd skip the sam bushing and put that money towards the volquartsen kit.....it's worth the money, for sure....and the kit has everything in it that'd the sam bushing would do, plus a MUCH MUCH MUCH better trigger
any will work, with a little trimming
i'd skip the sam bushing and put that money towards the volquartsen kit.....it's worth the money, for sure....and the kit has everything in it that'd the sam bushing would do, plus a MUCH MUCH MUCH better trigger
Re: Got my new plinker put together today!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: slowkota</div><div class="ubbcode-body">Do any 1911 grip panels work, or just certain ones? </div></div>
The Pachmayr grips I have on mine only had to be trimmed by the mag release button, but that's only because its a wrap around style grip. I put a few only 1911 grips on it and they seemed to fit fine. Some may need to be trimmed at the top edge by the slide release button.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: slowkota</div><div class="ubbcode-body">Do any 1911 grip panels work, or just certain ones? </div></div>
The Pachmayr grips I have on mine only had to be trimmed by the mag release button, but that's only because its a wrap around style grip. I put a few only 1911 grips on it and they seemed to fit fine. Some may need to be trimmed at the top edge by the slide release button.
Re: Got my new plinker put together today!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: GSRswapandslow</div><div class="ubbcode-body">any will work, with a little trimming
i'd skip the sam bushing and put that money towards the volquartsen kit.....it's worth the money, for sure....and the kit has everything in it that'd the sam bushing would do, plus a MUCH MUCH MUCH better trigger </div></div>
Yeah I think the Volquartsen trigger will be next. I've seen some guys put the Mark II trigger in the Mark III models. Whats the difference in doing that?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: GSRswapandslow</div><div class="ubbcode-body">any will work, with a little trimming
i'd skip the sam bushing and put that money towards the volquartsen kit.....it's worth the money, for sure....and the kit has everything in it that'd the sam bushing would do, plus a MUCH MUCH MUCH better trigger </div></div>
Yeah I think the Volquartsen trigger will be next. I've seen some guys put the Mark II trigger in the Mark III models. Whats the difference in doing that?
Re: Got my new plinker put together today!
I have basically the same gun/setup with a TacSol can . I put on one of the Majestic Arms kits and love it.
I have basically the same gun/setup with a TacSol can . I put on one of the Majestic Arms kits and love it.
Re: Got my new plinker put together today!
If you get the MKIII Accurizing kit you will need a bushing like Sam's to remove the mag safety. Mags will then just drop out. You can save some money by using your stock hammer and just buying the Volquartsen sear and any trigger of your choice, without buying the the whole kit. The Sam Lam bushing will tighten up the trigger group mating parts as the bushing has a slightly larger diameter that intersects with the disconnector arm "window". This group fit will improve your trigger slightly by eliminating a small amount of take-up in the trigger pull.
If you get the MKIII Accurizing kit you will need a bushing like Sam's to remove the mag safety. Mags will then just drop out. You can save some money by using your stock hammer and just buying the Volquartsen sear and any trigger of your choice, without buying the the whole kit. The Sam Lam bushing will tighten up the trigger group mating parts as the bushing has a slightly larger diameter that intersects with the disconnector arm "window". This group fit will improve your trigger slightly by eliminating a small amount of take-up in the trigger pull.
Re: Got my new plinker put together today!
looks great, that exact setup is on my short list of things to buy. for now this one does it for me, its killed many whistle pigs. don't have the volquartsen trigger yet, i like the stock one so im not sure ill change it. markIII upper mark II lower.
looks great, that exact setup is on my short list of things to buy. for now this one does it for me, its killed many whistle pigs. don't have the volquartsen trigger yet, i like the stock one so im not sure ill change it. markIII upper mark II lower.
Similar threads
