My computer crashed and I lost my load data for everything except the 168 VLD load I have set on press...I know I had data for a 180 nosler ab and a 200 nosler ab...but dont remember which powder and what charge. What seems to be the most accurate elk load out to 800 yards? My 168 load shot just over 2.5 inches at 500 today but the wind blows it pretty bad. I am also considering a 185 tsx load or maybe a 210 vld.
- Thread starter tlsmith22
- Start date
Re: Lost load data, need 300 win mag elk load
Yes I know...It was actually loads from the guy I bought the rifle from. I had wrote down the one I used. The otehr two were heavier bullets and I was wantn to try em.
Yes I know...It was actually loads from the guy I bought the rifle from. I had wrote down the one I used. The otehr two were heavier bullets and I was wantn to try em.
Re: Lost load data, need 300 win mag elk load
I would go with the 210 vld over RL-22 start at 71 grains and go up.My 700P loves 72.2 gr. of RL-22 and the 210 vlds.
I would go with the 210 vld over RL-22 start at 71 grains and go up.My 700P loves 72.2 gr. of RL-22 and the 210 vlds.
Re: Lost load data, need 300 win mag elk load
I would go with the 210 vld over RL-22 start at 71 grains and go up.My 700P loves 72.2 gr. of RL-22 and the 210 vlds.
I would go with the 210 vld over RL-22 start at 71 grains and go up.My 700P loves 72.2 gr. of RL-22 and the 210 vlds.
Re: Lost load data, need 300 win mag elk load
71-72gns of IMR 4350 under a 180 SGK or Nos AB should run about 3100-3175 from a 26" tube. Nothing fancy, but it flat works.
71-72gns of IMR 4350 under a 180 SGK or Nos AB should run about 3100-3175 from a 26" tube. Nothing fancy, but it flat works.
