Stock suggestions for ar15 600m+ build

[yocan]

So I've decided to go a little further with my 6.5 grendel and want a better stock (I think) logically what should I look for? I'm pretty tall 6'5" with very long arms.

Was thinking about the PRS, but considering i intend to shoot off a bipod, squared up, it being only able to go .25" shorter LOP of an A2 doesn't that make the PRS stock too long? I have a magpul ACS stock which somewhat does the job now.

Best options and why, I've never used a PRS before just initial thoughts.

 

[Captain Kirk]

Re: Stock suggestions for ar15 600m+ build

I think the PRS would be a good fit for your height, I have a fellow shooter about your height that runs a PRS AND a DPMS stock extension on his AR10.

Link to spacer ; http://www.brownells.com/rifle-parts/sto...r-prod5559.aspx

 

[346ci]

Re: Stock suggestions for ar15 600m+ build

PRS with a Accu-Shot.

 

[TenZero]

Re: Stock suggestions for ar15 600m+ build

I am also 6'5" with monkey arms, and I find the PRS is still a bit short. As Kirk said, DPMS makes a neat spacer that fits between the receiver and stock, and gives you an extra 1" LOP. This gets your PRS back in adjustment range, or makes an A2 a much better fit. I think midway has em.

 

[hlee]

Re: Stock suggestions for ar15 600m+ build

I'm 5'11" and have a PRS on my LR308. I have it cranked all the way out with the 1/2" thick butt pad to get enough length of pull that my head will comfortably rest on the cheek rest. I had to move my scope back some, but that was the trade off for a good cheek weld. I really like the A2 stock, but it was too low for a scope on a canted base.

 

[BERTMAN77MK2]

Re: Stock suggestions for ar15 600m+ build

I have long arms and use the VLTOR EMOD (A5 sys) or a collapsible and the MAGPUL PRS for fixed---u can use spacers on just about any stock

Am going to try the SOPMOD with that new SAPR cheekpiece on next build