Gunsmithing side bolt release for rem 700
- Thread starter joemusso
- Start date
Re: side bolt release for rem 700
http://www.phoenixcustomrifles.com/Prices_and_Services.html
Keith is GTG.
http://www.phoenixcustomrifles.com/Prices_and_Services.html
Keith is GTG.
Re: side bolt release for rem 700
kampfeld custom did mine
http://www.kampfeldcustom.com/index_009.htm
kampfeld custom did mine
http://www.kampfeldcustom.com/index_009.htm
Re: side bolt release for rem 700
Here's a Nesika release that I installed Saturday. Rotated above showline so that the stock didn't have to be inletted and paint matched. (finished B/C stock with bedding chassis)
$100 installed.
Here's a Nesika release that I installed Saturday. Rotated above showline so that the stock didn't have to be inletted and paint matched. (finished B/C stock with bedding chassis)
$100 installed.
Re: side bolt release for rem 700
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C. Dixon</div><div class="ubbcode-body">Here's a Nesika release that I installed Saturday. Rotated above showline so that the stock didn't have to be inletted and paint matched. (finished B/C stock with bedding chassis)
$100 installed.
</div></div>
That's a very cool idea
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C. Dixon</div><div class="ubbcode-body">Here's a Nesika release that I installed Saturday. Rotated above showline so that the stock didn't have to be inletted and paint matched. (finished B/C stock with bedding chassis)
$100 installed.
That's a very cool idea
Re: side bolt release for rem 700
I think you can get button type stops that are easy to install. You just drill and tap a hole, vs. milling a slot and drilling a small hole etc. They are ugly, but they work. I bought a rifle that had one installed, and I changed it from a pull knob to a push button. The other option was to try and fill in the hole and put in a rocker type.
I think you can get button type stops that are easy to install. You just drill and tap a hole, vs. milling a slot and drilling a small hole etc. They are ugly, but they work. I bought a rifle that had one installed, and I changed it from a pull knob to a push button. The other option was to try and fill in the hole and put in a rocker type.
Re: side bolt release for rem 700
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: joemusso</div><div class="ubbcode-body">Thank you guys for all the info. i contacted Chad at long rifle inc.
</div></div>
Good choice, not that any of the others mentioned were bad.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: joemusso</div><div class="ubbcode-body">Thank you guys for all the info. i contacted Chad at long rifle inc.
</div></div>
Good choice, not that any of the others mentioned were bad.
Re: side bolt release for rem 700
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BlackOps Tech</div><div class="ubbcode-body">Contact Mark at Short Action Custom, or Karl Kampfeld. </div></div>
Thanks Mike.
Here is a link to the information at our website and a couple pictures. We use a blind hole so it looks cleaner above the stock line just like Karl at Kampfeld Customs. We are able to rotate the action in our fixture to install the release just above the stock line for a clean finish.
Furthermore, our bolt stop bottoms out in the rear of the cutout so the pin does not have a shear load on it. We are currently only offering the Generation 3 SBR at this time.
Side Bolt Release Information
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BlackOps Tech</div><div class="ubbcode-body">Contact Mark at Short Action Custom, or Karl Kampfeld. </div></div>
Thanks Mike.
Here is a link to the information at our website and a couple pictures. We use a blind hole so it looks cleaner above the stock line just like Karl at Kampfeld Customs. We are able to rotate the action in our fixture to install the release just above the stock line for a clean finish.
Furthermore, our bolt stop bottoms out in the rear of the cutout so the pin does not have a shear load on it. We are currently only offering the Generation 3 SBR at this time.
Side Bolt Release Information
Re: side bolt release for rem 700
SAC gen 3 is the only way to go, I send all my builds to him for it. Anyone who would scoff at the price needs to watch him do it, after that youll wonder why he doesnt charge twice as much!
SAC gen 3 is the only way to go, I send all my builds to him for it. Anyone who would scoff at the price needs to watch him do it, after that youll wonder why he doesnt charge twice as much!
Re: side bolt release for rem 700
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M.Gordon</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BlackOps Tech</div><div class="ubbcode-body">Contact Mark at Short Action Custom, or Karl Kampfeld. </div></div>
Thanks Mike.
Here is a link to the information at our website and a couple pictures. We use a blind hole so it looks cleaner above the stock line just like Karl at Kampfeld Customs. We are able to rotate the action in our fixture to install the release just above the stock line for a clean finish.
Furthermore, our bolt stop bottoms out in the rear of the cutout so the pin does not have a shear load on it. We are currently only offering the Generation 3 SBR at this time.
Side Bolt Release Information
thats a clean job
</div></div>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M.Gordon</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BlackOps Tech</div><div class="ubbcode-body">Contact Mark at Short Action Custom, or Karl Kampfeld. </div></div>
Thanks Mike.
Here is a link to the information at our website and a couple pictures. We use a blind hole so it looks cleaner above the stock line just like Karl at Kampfeld Customs. We are able to rotate the action in our fixture to install the release just above the stock line for a clean finish.
Furthermore, our bolt stop bottoms out in the rear of the cutout so the pin does not have a shear load on it. We are currently only offering the Generation 3 SBR at this time.
Side Bolt Release Information
thats a clean job
</div></div>
