Re: Phoenix Custom Rifles "M24A2 clone"
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ryoxy</div><div class="ubbcode-body">its a mcCann rail </div></div>
Close. It's a Remington (Badger makes them) 20MOA MARS rail.
This is my rifle, and I was planning on doing a write up of it once I got out to Utah and had the opportunity to work up 175SMK and 208AMAX loads for it. The only difference between this clone and the M24A2 as issued is that this is not a M24 marked long action receiver and the barrel is a Rock Creek, but 1:10 instead of 1:11.25. The barrel has also not yet been machined down to the specs needed for the Ops Inc suppressor. Other than that, I'll elaborate on the build as well as get range reports and some pictures of it up when it's completed. The stock rock now is having a 3 color GAP pattern put on it.
Until then, I did want to say that both Keith, who does the machine work and his father Brad who does the finishing are highly recommended. Once we established what route we were going to take, as well as some open ended suggestions on the build everything went as planned and they had no issue getting in contact with me to make 110% sure they were doing what I was wanting as an end effect.
I'm sure their build lead times will be increasing, so I would personally recommend looking at them if you're wanting a custom build. Feel free to shoot me a PM if you want to know anything.
