What's the lowest cantilever mount for a flat top AR? I like to get really low on the stock and have read the PEPR mounts are kinda high.
Thanks,
John
Thanks,
John
Rifle Scopes Lowest Cantilever mount for AR
- Thread starter Hondo64d
- Start date
Re: Lowest Cantilever mount for AR
The Nightforce Unimount at 1.125” or 1.375” is a good choice.
The Nightforce Unimount at 1.125” or 1.375” is a good choice.
Re: Lowest Cantilever mount for AR
Burris' Pepr mount is high, it will clear a 56mm objective on a flattop with flip covers. Here's a picture of one (qd model) next to one of my Warne Ramp mounts, which will clear a 50mm and is a great height. It does not have as much forward positioning as the Burris.
I like them both but they have their separate purposes. The Warne is very nicely machined-
Burris' Pepr mount is high, it will clear a 56mm objective on a flattop with flip covers. Here's a picture of one (qd model) next to one of my Warne Ramp mounts, which will clear a 50mm and is a great height. It does not have as much forward positioning as the Burris.
I like them both but they have their separate purposes. The Warne is very nicely machined-
Re: Lowest Cantilever mount for AR
For 30mm tubes the Nightforce 1.125"
For 1" tubes I have gone to the Badger Riser @ .430 and a set of low .75" rings.
I could get a 44mm OBJ in the NF mount to clear the hand guard and a 40mm OBJ on the riser/rings.
For 30mm tubes the Nightforce 1.125"
For 1" tubes I have gone to the Badger Riser @ .430 and a set of low .75" rings.
I could get a 44mm OBJ in the NF mount to clear the hand guard and a 40mm OBJ on the riser/rings.
Re: Lowest Cantilever mount for AR
I appreciate the replies.
I'm thinking I'm going to go with a Burris MTAC 1-4. 24mm objective, so I should be able to go pretty low with it. Does that change anyone's recommendations?
Thanks,
John
I appreciate the replies.
I'm thinking I'm going to go with a Burris MTAC 1-4. 24mm objective, so I should be able to go pretty low with it. Does that change anyone's recommendations?
Thanks,
John
Re: Lowest Cantilever mount for AR
I dont know exactly what the height is but my Spuhr 30mm canti mount is pretty damn low and IMO is the best mount ever designed. It isnt a QD mount though.
I dont know exactly what the height is but my Spuhr 30mm canti mount is pretty damn low and IMO is the best mount ever designed. It isnt a QD mount though.
Re: Lowest Cantilever mount for AR
I'll check them out too. Not looking for a QD.
John
I'll check them out too. Not looking for a QD.
John
Re: Lowest Cantilever mount for AR
Spuhr looks pretty good, but beyond my wallet.
John
Spuhr looks pretty good, but beyond my wallet.
John
Re: Lowest Cantilever mount for AR
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hondo64d</div><div class="ubbcode-body">I appreciate the replies.
I'm thinking I'm going to go with a Burris MTAC 1-4. 24mm objective, so I should be able to go pretty low with it. Does that change anyone's recommendations?
Thanks,
John </div></div>
I would still recommend it. You could still go lower, but I think it's a great height for an AR. Centerline of the ocular is in a nice spot for most applications in my opinion.
These are not mine, but thought they might give you an idea of how it would turn out.
Someone's running this one backwards, interesting, don't know if it would work everywhere though
About the height you will get on flat top, with a short 1-4 or similar
It's a very nice mount for the money, I'm not sure how low your looking to go. I think your main obstacle will be the ocular and squishing your face low enough into whichever stock your using.
Another option, if you need cantilever might be to get a cantilever base like GSG'S (they have 2 types) or similar and just get the lowest rings that will suit your needs.
The Warne is very unique, but not for everyone. I'm assuming by getting as low as possible you are removing BUIS?? This mount incorporates 2 detachable 45 offsets for irons or a mini reflex. I posted a few things about the mount here- click here
Also compared it to the PEPR mount, if your hands on familiar with it might be useful to look at. click here
Good luck with your setup-
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hondo64d</div><div class="ubbcode-body">I appreciate the replies.
I'm thinking I'm going to go with a Burris MTAC 1-4. 24mm objective, so I should be able to go pretty low with it. Does that change anyone's recommendations?
Thanks,
John </div></div>
I would still recommend it. You could still go lower, but I think it's a great height for an AR. Centerline of the ocular is in a nice spot for most applications in my opinion.
These are not mine, but thought they might give you an idea of how it would turn out.
Someone's running this one backwards, interesting, don't know if it would work everywhere though
About the height you will get on flat top, with a short 1-4 or similar
It's a very nice mount for the money, I'm not sure how low your looking to go. I think your main obstacle will be the ocular and squishing your face low enough into whichever stock your using.
Another option, if you need cantilever might be to get a cantilever base like GSG'S (they have 2 types) or similar and just get the lowest rings that will suit your needs.
The Warne is very unique, but not for everyone. I'm assuming by getting as low as possible you are removing BUIS?? This mount incorporates 2 detachable 45 offsets for irons or a mini reflex. I posted a few things about the mount here- click here
Also compared it to the PEPR mount, if your hands on familiar with it might be useful to look at. click here
Good luck with your setup-
Re: Lowest Cantilever mount for AR
what is the scope?
what is the scope?
Re: Lowest Cantilever mount for AR
Very helpful Bob. Looks like the Warne will probably be the way I go. Looks Low enough for a good cheek weld and affordable too.
Thanks,
John
Very helpful Bob. Looks like the Warne will probably be the way I go. Looks Low enough for a good cheek weld and affordable too.
Thanks,
John
Similar threads
