• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

New to reloading, Need help on a .260

G

Gerald McDonnell

Private
Full Member
Minuteman
May 20, 2011
12
0
47
I have a Savage model 12 LRP in a .260 Rem.
It has a 26" barrel with a 1:10 twist.

I'm using the 120 gr. Nosler B-tips

So far, through my research, I have learned that the w760 powder (I got 1 MOA, 4 @ 3/4 with 1 flyer) may be to slow burning for the weight of bullet that I was shooting, which in turn, was not working with the barrel harmonics.

The Nosler reloading manual is based on a 20" barrel. After a bit more research I found that the H380 might be a better bet. Anyone have experience with these rifles and bullets?

Any help would be appriciated.
 
Re: New to reloading, Need help on a .260

H4350 is the most common powder I see people using, but this is also with 140gr range of bullets. That is what I plan on using when I get my new barrel in a couple weeks.
 
Re: New to reloading, Need help on a .260

Thanks guys. I think this will do me right.
 
Re: New to reloading, Need help on a .260

FYI when I started out with my 260 I knew that H4350 was the go to powder. But me being me I could not just follow the crowd. So I tried 4 other powders to see what I could do better. Well the results were not bad but it was overwhelmingly obvious that the H4350 was the powder. I could have saved myself lots of time and some money by just following what others said.
stick with the H4350.
 
Re: New to reloading, Need help on a .260

I tried H4350 and H4831. I ended up with H4350.
 
Re: New to reloading, Need help on a .260

But don't rule out the H4831SC though. It's what I use in mine and I love it. Works great win mine at 45 grns, 142SMK, win 7-08 brass. 28" kreiger on a surgeon. It shoots with my friends and the 4350. I have shot it too with similiar results. Less than a MOA difference at 1k. I know that others have had better luck with 4350 and thats cool. Just don't rule out the 4831 till you try it. Good luck with it.
 
Re: New to reloading, Need help on a .260

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Less than a MOA difference at 1k.</div></div>

Less than MOA group at 1K or less than MOA (10 inches) difference between loads?
 
Re: New to reloading, Need help on a .260

Those of you using H4350, Are you using the 120 gr bullets? The reason I ask is because it seem that people are using it for the heavier bullets in the 130-140 range.

And correct me if I'm wrong, but am I understanding right-slower burning powders are generally used for heavier bullets. And faster powders for light bullets. Is this correct?
 
Re: New to reloading, Need help on a .260

Fast/light; slow/heavy.

I used H4350 for 1939 Lapuas.
 
Re: New to reloading, Need help on a .260

Well thank you all. I got a lot of great info from this. I think I will try to play with the seating depth before I change powder. If that doesn't work, then I will probably hit up the H380.

Thanks again guys. I learned a lot.

Jerry
 
Re: New to reloading, Need help on a .260

H4350 works great for 120-123gr bullets in the 260 Rem; 3000fps with no pressure should be easily achievable somewhere between 44-45gr.

Varget will produce less velocity than H4350 (2800fps from a 22" 1:9 barrel, 2930fps from a 26" 1:8 barrel) but 39.3gr has provided great accuracy in both rifles with both the 120gr NBT and the 123gr A-Max.
 
Re: New to reloading, Need help on a .260

I think you will want to check the twist rate. I had an LRP in 260 and the twist is 1/8. Mine would shoot 5 shot groups measuring .280 with 44.5gr of H4350 and 142gr SMKs. I tried 140gr VLDs but the SMKs are cheaper and shot better in my rifle. I would stick with H4350 and heavier bullets if you want to shoot long range.
 
Re: New to reloading, Need help on a .260

mnhntr- Thank you. You are right. It is a 1:8. I can't believe I did that. I need to proof read before I post. Lol. Thanks again
 
Re: New to reloading, Need help on a .260

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: LRS_35</div><div class="ubbcode-body">Those of you using H4350, Are you using the 120 gr bullets? The reason I ask is because it seem that people are using it for the heavier bullets in the 130-140 range.

And correct me if I'm wrong, but am I understanding right-slower burning powders are generally used for heavier bullets. And faster powders for light bullets. Is this correct?

</div></div>

Yep use it for 120-142
 
Re: New to reloading, Need help on a .260

LRS if you can find some I would suggest you also give VV N160 a try. I have a custom 260. I started with H4350 since it seems to be the most go to powder for the heavies (139-142gr). That stuff shot "HORRIBLE" through my rifle no matter what load I put through it. On my third outting with the rifle I ran home from the range mid-session, loaded up a quick 20rnds with N160, returned to the range and instantly shot a 5 shot group in the .3's. The next 3 groups were all under .5. I now swear by that stuff. It almost doesn't matter what bullet or what recipe the stuff shoots lights out.
 
Re: New to reloading, Need help on a .260

I have used H-4350 successfully for the .260 with bullet weights from 142gr right on down to 95gr. My barrel lengths are 24", and 28".
 
Re: New to reloading, Need help on a .260

anybody using RL17 for a little extra kick in speed?
 
Re: New to reloading, Need help on a .260

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dMac</div><div class="ubbcode-body">anybody using RL17 for a little extra kick in speed? </div></div>

My experience with RL17 is one can achieve H4350 velocities with 1.0gr less powder, ie. 43.5gr RL17 produces same speeds as 44.5gr H4350. At a given charge weight RL17 will be ~100fps faster than H4350, and both powders start showing pressure around the same charge weight.

I experienced very good accuracy with 130gr Berger VLDs and 43.5gr RL17 @ 3000fps from 26" barrel, with low ES/SDs.

I did see temperature sensitivity though, with 60fps+ spikes if ammo was in direct sunlight (even on mild temp days) for more than 5-10 minutes.
 
Re: New to reloading, Need help on a .260

Another newb here with a 260... not to jack your thread but hate to start a new one with a very similar question...

somewhat similar.. I'm working on loads and trying different bullets, and I keep seeing 44.0-44.5gr of H4350... Question is what kind of velocities are ya'll getting, I'm at 2810-2896fps depending on seating depth with 42.5.. I'm not showing preasure but am wondering since I keep seeing 44grs and the gunsmith that built it said to start around 42grs and work up... (could my chonograph be consitantly off?)

(26" barrel, 8 twist, .090" throat, 120 rnds so far)
 
Re: New to reloading, Need help on a .260

With the 140 A-Max and SMK, and the 142 SMK, I would consider 44.5gr. of H-4350 to be a reasonable and practical max load, and I like 43.8-43.9gr. as my load for 24" and 28" barrels. That load gives about 2850fps in the 28".

The 139gr Scenar tended to go peaky with pressures at a lower charge, and although it was as accurate, I didn't like the pressure signs and discontinued using it. I was blowing primers with 40.0gr of V-V N550 on hot days, and decided the bullet and powder were both too zippy for my gun.

Greg
 
You must log in or register to reply here.

Similar threads

WyoWindCall
Help from someone with the newest Hornady reloading manual
Replies
4
Views
377
JM4590
JM4590
N
30-06 load questions
Replies
18
Views
977
HoneyBadger777
H
D
New to reloading need advice where to start 300wm
Replies
46
Views
695
Thump_rrr
T
B
sr25/ar10/m5 load help 178 eldm over 4064 what velocities should i expect 20" barrel
Replies
5
Views
161
BigBlastin300win
B
aranagabriel1
Advise needs on 7PRC and 300PRC ammo
Replies
10
Views
179
sakoguy21
S
Top Bottom
Back