• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Tikka T3 Build Complete!

N

nutzkicker617

Private
Full Member
Minuteman
Feb 25, 2010
51
0
38
Pasadena, CA
Thanks to this forum for all the information, I have finally completed my Tikka build. This rifle started out as a Tikka T3 Scout CTR .308.

Stock: KRG Whiskey 3
Monopod: AccuShot Monopod
Bidpod: Harris which will be replaced by an Atlas Bipod once the adapter arrives
Rings: Badger Ordnance
Scope: Nightforce NXS 5.5-22x50 NP-R1 HiSpeed ZS
Bolt Handle: HSS Hinterland
Bolt Shroud: HSS Hinterland
Brake: SXT Tactical

Tikka T3 Varmint .223 and T3 Scout CTR .308
DSC_0320.jpg


DSC_0345.jpg


Scope/Barrel gap is about 2 paper thicknesses
DSC_0337.jpg


DSC_0332.jpg


First time ever shooting the gun:
DSC_0348.jpg



Thanks to Justin from KRG for the great stock!
 
Re: Tikka T3 Build Complete!

Excellent. Good to see another KRG stocked rifle in use. What did you coat it with?
 
Re: Tikka T3 Build Complete!

That is awesome , what did you paint the stock with?
 
Re: Tikka T3 Build Complete!

man, that is an awesome looking stick! bet she shoots too!
 
Re: Tikka T3 Build Complete!

good god man!

i'm hoping to snag a .223 tikka before long..will be my first. deff have to get the same stock...looks great


did you order it in that color, or did you coat/paint it yourself?
 
Re: Tikka T3 Build Complete!

That KRG stock looks absolutely fantastic. Totally transforms the Tikka.
 
Re: Tikka T3 Build Complete!

Also interested in how you rate the SXT Brake. Thanks
 
Re: Tikka T3 Build Complete!

Thanks for the kind words!

The stock is only available in black as of right now.

I spray canned it with Krylon Khaki just to see how it would turn out...the paint is not as durable as I would like it to be, so will think about cerakoting it down the line.

I have not shot it with the brake yet. Will report back after Wednesday when I do.

I was tempted to start with a R700 into an AICS stock and the whole bit, but after feeling the action and trigger of the Tikka compared to a Remmy, it was a no brainer. Action is smoother than any other, trigger is fantastic and to my personal liking adjusted to ~1.8 pounds. Out of the box, you can see that it's a half MOA rig. The rifle itself cost me $850 pre tax and dros.

As far as the pricing for the other items:

Stock: (Was lucky enough to get in on the first KRG batch so I got a bit of a discount)

http://www.kineticresearchgroup.com/products/w3c.php

Brake, bolt handle, shroud
http://www.hss.net.au/index.php?cPath=118&osCsid=0c4ac842d8e6a60c5f938069571281da

Scope and Rings
http://www.eurooptic.com/nightforce-rifle-scopes.aspx

Monopod:
http://www.accu-shot.com/Accu-Shot-Monopod-Mounting-Options.php



Total came out to around: $4300
 
Re: Tikka T3 Build Complete!

Was not expecting to get such a serious hard on when I clicked the link, congrats on a killer build. It's got me thinking I need a Tikka with a KRG Chassis.
 
Re: Tikka T3 Build Complete!

Holy cow I'm not sure how I missed this thread. I really really like the tan color. And we're all glad you like the chassis. If you would, send us an email with your address to info at krg-ops.com cause we have some Gen II parts for you. We made the cheek piece a little wider/more comfortable and some other little things. Good to see more stocks in use! That's a hell of a build.
Justin
 
Re: Tikka T3 Build Complete!

nice looking setup
and thanks for posting the info
i have a friend that is building a tikka t3 also and he'd definately love to give this a look
 
Re: Tikka T3 Build Complete!

I shot the rig for the first time with the brake last week. Definately a noticeable difference in felt recoil. If i had to throw out an un-scientific estimate, I would say the recoil decreased by about 25-30%.

While at full 22x on the scope magnification, I was able to see the bullet hit the target out to six hundred yards, maintaining visual on point of original aim (which is the main reason why I wanted a brake).

I dont know if it directly affected the accuracy or not since I modified my loads. I averaged 0.75" MOA at 100 yards via 6 four-shot groups, which was much worse than last time. I think that my muzzle fps was WAY too low since I was dropping 18 MOA @ 600 yards (can anyone verify that my thinking is correct?) I seated the OAL out to 3.86" from the previous 3.78" with the same amount of varget, leaving lots of empty space inside the case. I will try out a 44gr load next time. Part of the reason was probably me too, but I know the FPS was too low.

Lastly, sound increased more than 50%. I did not have a decibel meter, but I had to use ear plugs, and ear muffs. It was quite painful without 2 layers of protection. But no, the clamped brake did not fly off and is still "zeroed" on the barrel.
 
Re: Tikka T3 Build Complete!

That Tikka looks Sick! I have a Tikka T3 Varmint in .22-250 that i want to put a Whiskey 3 chassis on........ Did you do all the mods yourself or did you take it to a gun smith?
 
Re: Tikka T3 Build Complete!

18 MOA @ 600 suggests you're right around 2480 fps. I get 2650 from two different 22" barrels, so you shouldn't have any problem getting your MV up to around 2600. Hopefully, the 44 gr of Varget will get you close.
 
Re: Tikka T3 Build Complete!

That's a nice looking setup there! I finally got to do some load testing on my T3 Varmint. Not too bad considering I was splitting shooting time with my deer rifles (rifle season starts tomorrow). Got to love that trigger!

DSC_0872.JPG

DSC_0871.JPG

DSC_1885.JPG

DSC_1893.JPG

DSC_1895.JPG
 
Re: Tikka T3 Build Complete!

Gotta have the monopod.

I will try out the sand bag soon enough, but I love the convenience of the thing and adjustability while maintaining Point of Aim
 
Re: Tikka T3 Build Complete!

Nutz is that the stock rail or the EGW? Any trigger work? Where did you get your HSS parts? Directly from them or from a US dealer?? Thanks
 
Re: Tikka T3 Build Complete!

Stanwood-

On the CTR...its a stock rail and on my Varmint...it was an EGW. I have done NO trigger work...plenty of dry fire is enough to smooth the already great trigger from the factory.

I got the HSS parts directly from Australia, although now you can source then from KRG-ops.com
 
Re: Tikka T3 Build Complete!

love seeing tikka customs. although the factory ones already shoot as good and in many cases better.
 
Re: Tikka T3 Build Complete!

I was going to do the same thing to my Tikka T3 Varmint, but changed my mind at the last minute. I was on the pre-order list and was only a week or two from delivery time. Instead, I went with the XLR Evolution chassis. Though the KRG looks fantastic, I don't regret my choice.

6632705293_75ec4698ea_b.jpg
 
Re: Tikka T3 Build Complete!

SAMI, what stock is that? Does it come in lefty for my stainless T3 .243?<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sami</div><div class="ubbcode-body">That's a nice looking setup there! I finally got to do some load testing on my T3 Varmint. Not too bad considering I was splitting shooting time with my deer rifles (rifle season starts tomorrow). Got to love that trigger!

DSC_0872.JPG

DSC_0871.JPG

DSC_1885.JPG

DSC_1893.JPG

DSC_1895.JPG

</div></div>
 
Re: Tikka T3 Build Complete!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pwizl</div><div class="ubbcode-body">SAMI, what stock is that? Does it come in lefty for my stainless T3 .243? </div></div>I believe that stock is imported from Europe. Can't find the link I have saved but will post it when I find it. Looks nice.
 
Re: Tikka T3 Build Complete!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pwizl</div><div class="ubbcode-body">SAMI, what stock is that? Does it come in lefty for my stainless T3 .243?</div></div>

It would come in any way you would like it. It's a custom order stock but unfortunately the stock maker has retired already. My brother still occasionally has him make him adjustable cheekrests for his stocks but he has said he won't make complete stocks anymore.

I took a stock from Richards Microfit that was made to T3. About $200 for a rough stock that they even screwed up on the inletting and it had to be fixed. He had Lauronen (the stock maker) do the cheekrest and other stuff he did himself.

Before and after. It is still unfinished but looks a lot nicer now. If I had the space for a full woodshop I would start making some myself. With limited space and tools, it's too cumbersome to make them. The last picture is one of my own test projects on a Savage 16. I have a few more blanks that I intend to finish up nicer but without proper space/tools there really isn't enough time for it.

DSC_1957.JPG

DSC_1958.JPG

DSC_1959.JPG


zeiss%252520005.jpg

zeiss%252520007.jpg


DSC_1852.JPG
 
Re: Tikka T3 Build Complete!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mnshortdraw</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pwizl</div><div class="ubbcode-body">SAMI, what stock is that? Does it come in lefty for my stainless T3 .243? </div></div>I believe that stock is imported from Europe. Can't find the link I have saved but will post it when I find it. Looks nice. </div></div>

I don't if the below link is what you had in mind. I do believe these stocks are made by the same person (Antero Lauronen). They run about 600 euros in Finland.

http://jalonen.fi/index.php?mid=5&pid=22
 
Re: Tikka T3 Build Complete!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hurja</div><div class="ubbcode-body">
Valokuva0003.jpg
</div></div>

Very nice!

Olenko nahnyt saman tukin myos eralla.netissa?
 
Re: Tikka T3 Build Complete!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sami</div><div class="ubbcode-body">I don't if the below link is what you had in mind. I do believe these stocks are made by the same person (Antero Lauronen). They run about 600 euros in Finland.

http://jalonen.fi/index.php?mid=5&pid=22

</div></div>
The last stock in the picture is the one I was thinking of. Nice to see some worked over Tikkas. Those Richard's stocks are so far from correct I am always suprised to see one finished. Nice work.
 
Re: Tikka T3 Build Complete!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mnshortdraw</div><div class="ubbcode-body">
The last stock in the picture is the one I was thinking of. Nice to see some worked over Tikkas. </div></div>
The ones on the pictures are all custom guns. Jyri Jalonen makes his own actions as well. I think the only ones "outsourced" are the stocks. I believe he is well known for his silhouette guns.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mnshortdraw</div><div class="ubbcode-body">Those Richard's stocks are so far from correct I am always suprised to see one finished. Nice work. </div></div>
Yep, I certainly wouldn't recommend them to anyone.
 
Re: Tikka T3 Build Complete!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sami</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hurja</div><div class="ubbcode-body">
Valokuva0003.jpg
</div></div>

Very nice!

Olenko nahnyt saman tukin myos eralla.netissa? </div></div>

Kyllä
 
Re: Tikka T3 Build Complete!

WOW, that is the first T3 that caused an almost immediate NRB (thats a 'no reason boner). Great looking rifle!!!
 
Re: Tikka T3 Build Complete!

Antero Lauronen has reportedly retired. his doctrine was to continue to do logs Antero equipment ...
 
Re: Tikka T3 Build Complete!

Little brother finally finished his project. Hardest part was to find a light weight scope with an image he liked. He finally settled on Swarovski Habicht 4-12x50. Main use will be bird hunting, upland and geese. I have to say I am jealous of the suppressor, 70mm length, 40mm diameter, about $150 total price (no permits needed).

Action: Tikka T3
Barrel: Lothar Walter light varmint, 6.5x55 SE
Suppressor: Jori Aaltonen custom, 7 cm length
Stock: Mauri Johansson
Scope: Swarovski Habicht 4-12x50
Bipod: Atlas

2013-01-10+21.42.53.jpg


My SAKO AIII also got a new stock this Christmas.

DSC_2956.JPG


DSC_2957.JPG


DSC_2958.JPG


DSC_2955.JPG
 
You must log in or register to reply here.

Similar threads

J
SOLD Tikka T3 CTR, 308, 20", Sherk Bolt handle, spare firing pin and KRG Bravo (separate)
Replies
1
Views
346
x0mb13
x0mb13
viking78
Coolest Tikka rifle
Replies
41
Views
4K
Baron85
B
M
SOLD 260 Rem Tikka T3 CTR Barreled Action w/Brass and Dies - Now Splitting
Replies
12
Views
1K
harlequin_forest
H
M
SOLD Tikka T3, 6br, krg, timney
Replies
1
Views
286
Malfieri
M
117D-RTO
Accessories MANNERS MCS-EHTA Tikka stock
Replies
39
Views
4K
117D-RTO
117D-RTO
Top Bottom
Back