Re: 700 police 300 win mag 26in HB
That's about what I paid in Dec of '08 (sold some commie crap for double and bought the rifle & scope; thanks obama
). It's been a good rifle. Mine has the older x-mark that adjusts out of the stock; was able to get a nice, crisp & safe trigger pull.
If you already have a lot of time behind a rifle, recoil shouldn't be an issue. If you're rough on proper position, it will beat you up a little.
My rifle shot well with 190smk's and 208 amax's. I'd like to claim some crazy accurate groups, but I never consistently had any. Working up loads (about the only time I would shoot for groups), 4 out of 5 would be less than 1 moa, but almost always have 1 shot that would about double that. Probably me, not the rifle. Good enough for internet sub-moa...
Only complaint I can think of is rough bolt operation. The bolt fit a little loose and could bind when starting to move it forward to load a rd. Bolt closure also felt rough and kinda like it had stages as it closed. I worked the bolt with a little (very little) lapping compound. I didn't really know what I was doing, but it did make bolt operation feel better.
The throat is a little shorter than my Rem 700 hunting rifles; I don't know if that's by design or just the way it worked out when Rem cut it. The factory mag has plenty of room to seat the 208 amax all the way to rifling, even after a couple tho down the barrel (but I seat them a little off the rifling). The chamber must be a little on the tight side because I get high velocities at low to mid range data. Again, I don't know if that's by design or just the way it worked out.
I've enjoyed the rifle. When shooting w/ friends, it's fun to watch the plate swing when they shoot, then the boomer sends it flailing...
The 300 hits with authority…