adjustable gas block

[phxfa]

looking for some advice on which adjustable gas block for a 24 in. .204 Ruger, .936 dia. Im going to be running this suppressed full time

 

[green338 2.0]

Re: adjustable gas block

I have a new in wrapper PRI adjustable gas block with rifle length gas tube, not sure if it will be the best for your rifle, but works for my AR15/10s flawlessly.

 

[9H_Cracka]

Re: adjustable gas block

Assuming you want adjustable, meaning set once and leave alone, and not selectable, then the PRI is a no brainer. Just make sure you get the correct barrel tenon diameter.

Be sure and loc tite the allen where you want it once you decide how many turns in our out you want to run it. Also loc tite the allens from underneath that hold it in place if you don't want it to shoot loose.

 

[phxfa]

Re: adjustable gas block

looks like the PRI is the ticket, thanks guys

 

[DT1]

Re: adjustable gas block

JP Enterprises makes very good adjustable blocks. They've been at it for 15+ years and have got it down pat.

 

[LongArm]

Re: adjustable gas block

SLR da7 is the best adjustable gas block.

 

[redirt78]

Re: adjustable gas block

Seekins makes a low pro adjustable with a secondary brass set screw to lock the adjustable set screw where you want it. Says you can access both screws through your handguard. Not sure of availability though.

Edit: Just noticed the .936 size. Not sure about that.

 

[DT1]

Re: adjustable gas block

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: LongArm</div><div class="ubbcode-body">SLR da7 is the best adjustable gas block. </div></div>

OP is looking for a .936 gas block. According to the SLR website, they only make a .750.

 

[hlee]

Re: adjustable gas block

JP makes one that works great and will fit a 0.936 barrel. I think they make both railed and low profile in that diameter.

 

[BLDTYLRY]

Re: adjustable gas block

I used the JP .936 Adjustable GB on my Shilen 24" 204 Ruger. If you are going to run a long handguard, make sure there's room. I used a Seekins 15" MCSR and have 1/8" of clearance.

 

[JFComfort]

Re: adjustable gas block

I like the Syrac Ordnance adjustable gas block.

 

[green338 2.0]

Re: adjustable gas block



I've used; Paladin Machine, JP Enterprises, and PRI adjustable gas blocks. They all work very similarly. I will never run a gas gun without one.

 

[BLDTYLRY]

Re: adjustable gas block

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JFComfort</div><div class="ubbcode-body">I like the Syrac Ordnance adjustable gas block. </div></div>

I don't think Syrac makes a .936 GB as this is what the OP was looking for.

 

[9H_Cracka]

Re: adjustable gas block

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: green338</div><div class="ubbcode-body">

I've used; Paladin Machine, JP Enterprises, and PRI adjustable gas blocks. They all work very similarly. I will never run a gas gun without one.
</div></div>

I thought the Paladin was selectable, not just adjustable. Can you post a pic of the other side of the Paladin? Also contact info? I need to move to selectable for suppressed/unsuppressed operation.

 

[lawdog]

Re: adjustable gas block

You may want to look at Wilson Combat adjustable low profile gas block. I have one on a 260 Rem. AR and it works like a charm.