I normally shoot 208 grain AMax's with 75.6 grains of H1000. I have a box of 50 180 grain Accubonds and am wondering where I should start. Thanks in advance!
Recipe For .300 win mag and 180 grain Accubonds?
- Thread starter EasternNChunter
- Start date
Re: Recipe For .300 win mag and 180 grain Accubonds?
With 180's using H1000 you'll find a high node around 80-81grs. Also another good powder is RL-22 around 75grs, high end node. Load the AB's .020"-.030" off the lands.
With 180's using H1000 you'll find a high node around 80-81grs. Also another good powder is RL-22 around 75grs, high end node. Load the AB's .020"-.030" off the lands.
Re: Recipe For .300 win mag and 180 grain Accubonds?
Found IMR4831 shoots 180gr Hornady Interbonds very nicely. Load was around 72.0grs and ~3000fps.
Found IMR4831 shoots 180gr Hornady Interbonds very nicely. Load was around 72.0grs and ~3000fps.
Re: Recipe For .300 win mag and 180 grain Accubonds?
71-72gns of IMR 4350 usually nets me around 3050fps in RP brass with CCI250's
71-72gns of IMR 4350 usually nets me around 3050fps in RP brass with CCI250's
Similar threads
Reloading Equipment
1700 Berger 7MM 180 and 182 grain bullets.
