I was wondering what the DTA owners are doing when it comes to non-DTA suppressors. I am looking to buy a DTA and already have suppressors that are 5/8x24 threaded. Thanks.
- Thread starter turbohardtop
- Start date
Re: DTA rifle and non-DTA suppressors
I use a 5/8-24 YHM can, it works perfectly for all of my DTA Barrels. What exactly is your question?
I use a 5/8-24 YHM can, it works perfectly for all of my DTA Barrels. What exactly is your question?
Re: DTA rifle and non-DTA suppressors
sorry, I thought the DTA comes with 3/4x24 threads. I would hate to have the barrel cut or rethreaded.
sorry, I thought the DTA comes with 3/4x24 threads. I would hate to have the barrel cut or rethreaded.
Re: DTA rifle and non-DTA suppressors
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: turbohardtop</div><div class="ubbcode-body">sorry, I thought the DTA comes with 3/4x24 threads. I would hate to have the barrel cut or rethreaded. </div></div>
They do, so you will have to have them rethreaded 5/8. Unless you buy a barrel from SAC (highly recommended)
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: turbohardtop</div><div class="ubbcode-body">sorry, I thought the DTA comes with 3/4x24 threads. I would hate to have the barrel cut or rethreaded. </div></div>
They do, so you will have to have them rethreaded 5/8. Unless you buy a barrel from SAC (highly recommended)
Re: DTA rifle and non-DTA suppressors
Alternative is to go to a .338LM can and use across platforms.....
Just a thought.
Alternative is to go to a .338LM can and use across platforms.....
Just a thought.
Re: DTA rifle and non-DTA suppressors
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ColdBoreMiracle</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: turbohardtop</div><div class="ubbcode-body">sorry, I thought the DTA comes with 3/4x24 threads. I would hate to have the barrel cut or rethreaded. </div></div>
They do, so you will have to have them rethreaded 5/8. Unless you buy a barrel from SAC (highly recommended) </div></div>
I totally agree. Mark builds the best rifles and barrels out there for the DTA. I have sent all my factory DTA barrels to Mark, that have been 3/4x24, and had him rethread to the more popular 5/8".
Or you can just purchase the brand loyal DTA suppressor, that is 3/4x24. I for one think that there is better suppressor's out there. Not that the DTA suppressor isn't good, I just think there is more price friendly suppressor's out there.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ColdBoreMiracle</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: turbohardtop</div><div class="ubbcode-body">sorry, I thought the DTA comes with 3/4x24 threads. I would hate to have the barrel cut or rethreaded. </div></div>
They do, so you will have to have them rethreaded 5/8. Unless you buy a barrel from SAC (highly recommended) </div></div>
I totally agree. Mark builds the best rifles and barrels out there for the DTA. I have sent all my factory DTA barrels to Mark, that have been 3/4x24, and had him rethread to the more popular 5/8".
Or you can just purchase the brand loyal DTA suppressor, that is 3/4x24. I for one think that there is better suppressor's out there. Not that the DTA suppressor isn't good, I just think there is more price friendly suppressor's out there.
Re: DTA rifle and non-DTA suppressors
Mark at Short Action Customs is the man. I have 3 DTA barrels from him, and am waiting on another.
Mark at Short Action Customs is the man. I have 3 DTA barrels from him, and am waiting on another.
Re: DTA rifle and non-DTA suppressors
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Chiller</div><div class="ubbcode-body">Alternative is to go to a .338LM can and use across platforms.....
Just a thought. </div></div>
The man makes an excellent point, if you plan on ever having a big girl (.338) then you'd be foolish to rethread 5/8.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Chiller</div><div class="ubbcode-body">Alternative is to go to a .338LM can and use across platforms.....
Just a thought. </div></div>
The man makes an excellent point, if you plan on ever having a big girl (.338) then you'd be foolish to rethread 5/8.
Re: DTA rifle and non-DTA suppressors
Adapters exist to go from 3/4 down to 5/8 for your suppressor.
Adapters exist to go from 3/4 down to 5/8 for your suppressor.
Re: DTA rifle and non-DTA suppressors
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jon Lester</div><div class="ubbcode-body">Adapters exist to go from 3/4 down to 5/8 for your suppressor.</div></div>
Get a delta p design adapter if you go this route. I have one with my can and it works great.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jon Lester</div><div class="ubbcode-body">Adapters exist to go from 3/4 down to 5/8 for your suppressor.</div></div>
Get a delta p design adapter if you go this route. I have one with my can and it works great.
Re: DTA rifle and non-DTA suppressors
Delta P adapter for the quick fix
Delta P adapter for the quick fix
Re: DTA rifle and non-DTA suppressors
I have a TBAC 338 BA suppressor on order. It comes with muzzle brakes from 338 to smaller calibers with all thread pitches, which allows you to use one great suppressor which threads over the breaks on multiple rifles. Piece of cake.
I have a TBAC 338 BA suppressor on order. It comes with muzzle brakes from 338 to smaller calibers with all thread pitches, which allows you to use one great suppressor which threads over the breaks on multiple rifles. Piece of cake.
Re: DTA rifle and non-DTA suppressors
Reading through that massive 75 page DTA thread, you will learn that DTA suppressors aren't the quietest can you can put on there, but they are the most accurate, and in most cases, increase accuracy over the unsuppressed round. I am not sure about other cans, but the DTA will rezero EVERYTIME you put that sucker on there.
Yes... 2k is a lot to spend on a can, but if you want the best you got to pay the piper. I placed an order from the 338 can last week, as well as the 338 conversion. They still have cans in stock! The conversion on the other hand is a different story. My NFA paperwork will probably clear before the barrel arrives. Make sure you order the muzzle break for the 308 that supports the 338 can.
Reading through that massive 75 page DTA thread, you will learn that DTA suppressors aren't the quietest can you can put on there, but they are the most accurate, and in most cases, increase accuracy over the unsuppressed round. I am not sure about other cans, but the DTA will rezero EVERYTIME you put that sucker on there.
Yes... 2k is a lot to spend on a can, but if you want the best you got to pay the piper. I placed an order from the 338 can last week, as well as the 338 conversion. They still have cans in stock! The conversion on the other hand is a different story. My NFA paperwork will probably clear before the barrel arrives. Make sure you order the muzzle break for the 308 that supports the 338 can.
Re: DTA rifle and non-DTA suppressors
thanks for the reply guys. I was hoping for direct mount instead of the QD mount approach. I guess I will have to look at re-threading as an option and purchase a single caliber DTA kit and add other caliber as well. I already have more suppressors than rifle so I could dedicate one to this rifle.
thanks for the reply guys. I was hoping for direct mount instead of the QD mount approach. I guess I will have to look at re-threading as an option and purchase a single caliber DTA kit and add other caliber as well. I already have more suppressors than rifle so I could dedicate one to this rifle.
Re: DTA rifle and non-DTA suppressors
I don't believe they'll accomodate you with anything other than 3/4x24:
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: http://www.deserttacticalarms.com//faq</div><div class="ubbcode-body">Why doesn't the SRS 308 win have the standard 5/8x24 thread pitch?
We threaded all the calibers ¾x24 for two reasons, number one the larger thread creates a stiffer barrel enhancing accuracy, number two is the 3/4x24 pitch enables one to use .338 caliber silencers on all four caliber barrels, it is very effective and saves money. The ¾x24 thread pattern is large enough that customers can easily have their own gunsmith rethread their barrels down to 5/8x24 if they wish. <span style="text-decoration: underline"><span style="font-style: italic">We do not do custom threads so please don't ask.</span></span></div></div>
I don't believe they'll accomodate you with anything other than 3/4x24:
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: http://www.deserttacticalarms.com//faq</div><div class="ubbcode-body">Why doesn't the SRS 308 win have the standard 5/8x24 thread pitch?
We threaded all the calibers ¾x24 for two reasons, number one the larger thread creates a stiffer barrel enhancing accuracy, number two is the 3/4x24 pitch enables one to use .338 caliber silencers on all four caliber barrels, it is very effective and saves money. The ¾x24 thread pattern is large enough that customers can easily have their own gunsmith rethread their barrels down to 5/8x24 if they wish. <span style="text-decoration: underline"><span style="font-style: italic">We do not do custom threads so please don't ask.</span></span></div></div>
Re: DTA rifle and non-DTA suppressors
We don't do custom rethreading on barrels guys.
We don't do custom rethreading on barrels guys.
Re: DTA rifle and non-DTA suppressors
Delta P is the way to go.
Delta P is the way to go.
