Fnh fs2000

[Opie98b]

Not going to use it as a precision rifle, but I was wondering if anybody happens to know if Pmags will work in the fs2000?

 

[Sigma05]

No they don't. The FS2000 has a o-ring of sorts in the mag well and only permits for standard alum GI mags.


"Ex Umbris Venimus"

 

[800mZero]

Also to note--because of this design, mags do not drop free and must be pulled.

 

[carnageangel]

Troy Battle mags fit! I don't know what they changed to make them $25 now, but my older $11 ones work fine and lock up with out issue, very happy

 

[Opie98b]

Cool. Thanks everybody.

 

[Opie98b]

Now does anybody know the thread pitch so I can put a suppressor on this thing?

 

[leadbullet]

any milspec alum mag will fit except the 20 rd, I wonder if the magpull E mag will work though.

 

[Unknown]

IIRC, the flash suppressor on the FS2000 is soldered/and/or pinned in place. They don't want you to take it off..although I don't know why they would give a damn, unless it is overall length.

 

[ss355]

Now does anybody know the thread pitch so I can put a suppressor on this thing?

I believe it's the same as the FAL -- 9/16x24 LH

 

[Blasst]

hey mags are no problem. Yeah P mags don't work but so what.Ive used a bunch C products mags same as in my Grendel, used various mags....no big deal. Never been in a wrestling match trying to remove mag either. There is a reason those are expensive guns. They did a lot of things right. Read about some of the torture tests people over on Gabe Suarez forum have done and you'll be a believer in polymer products. Some guys add NEU triggers....same as the Steyr AUGS, people are using various suppressors. adding rails......they're awesome. I'm about to figure out what suppressor I'm gonna use. I'll get a suppressor I can use on several guns. Probably use the same suppressor on my grendel, SteyrAUG and FS2000. I use a 338 Thunderbeast on my 338, 308, and creedmoor. It's all little shit. You may ave to find an adaptor for a gun or have one made even .....but it's better than spending another $1500 or $1800 on a can.

 

[Opie98b]

hey mags are no problem. Yeah P mags don't work but so what.Ive used a bunch C products mags same as in my Grendel, used various mags....no big deal. Never been in a wrestling match trying to remove mag either. There is a reason those are expensive guns. They did a lot of things right. Read about some of the torture tests people over on Gabe Suarez forum have done and you'll be a believer in polymer products. Some guys add NEU triggers....same as the Steyr AUGS, people are using various suppressors. adding rails......they're awesome. I'm about to figure out what suppressor I'm gonna use. I'll get a suppressor I can use on several guns. Probably use the same suppressor on my grendel, SteyrAUG and FS2000. I use a 338 Thunderbeast on my 338, 308, and creedmoor. It's all little shit. You may ave to find an adaptor for a gun or have one made even .....but it's better than spending another $1500 or $1800 on a can.

Good to know. I read on another site that its almost easier to cut the barrel and rethread it than try to find a suppressor to fit it. I was thinkin I could do that and thread it the same as my AR. That way I can switch the suppressor between em. And I've heard the thunderbeast is the tits for the 338.

 

[Blasst]

Good to know. I read on another site that its almost easier to cut the barrel and rethread it than try to find a suppressor to fit it. I was thinkin I could do that and thread it the same as my AR. That way I can switch the suppressor between em. And I've heard the thunderbeast is the tits for the 338.

yeah some people are cutting off the barrel and rethreading. I may do that depending on what "can" I use. Could be cheaper that way. I just want to be able to move that suppressor between a couple or 3 guns

 

[Opie98b]

yeah some people are cutting off the barrel and rethreading. I may do that depending on what "can" I use. Could be cheaper that way. I just want to be able to move that suppressor between a couple or 3 guns

Agreed. I bet I end up doing that.