• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Reloading Equipment Indiana buy/sell/trade/ page

Status
Not open for further replies.
Looking for SRP and willing to drive to anywhere in N Indiana from MI. Got just about all the other hot ticket items to trade for it short of Hornady 6.5 creed and 9mm factory ammo.
 
I am looking for 8208xbr and h335 in northeast indiana but will travel.
 
I’ve got plenty of H335. Whatcha got to trade?
 
I have 16# of surplus h335 ( wc844 ) would trade for H 1000 and /or 190 smk some 220 smk.
East central In.
 
I will be traveling from Alabama to Terre Haute, Indiana next week for work. If anybody wants to trade some primers for a pound of h1000 let me know.
 
I will be traveling from Alabama to Terre Haute, Indiana next week for work. If anybody wants to trade some primers for a pound of h1000 let me know.
Which primers and how many
 
I have 15lbs of RL17 to trade for 8208 or H4350 ( Fairmount IN)
 
WTB- CCI 400, Federal 215M. Varget/Retumbo
Dont have much to trade at the moment, but cash still buys stuff right? Lebanon, IN
 
West Lafayette here.

What I have:
Lee FL and seating dies for .243 and .308.
RCBS carbide 3 die sets 9mm & 44mag/spec
700+ Bushwacker Bullet Co (Missouri Bullet Co) hard cast lead 240g SWC 0.430 (44 cal) https://www.grafs.com/retail/catalog/product/productId/10672
835 pieces of 44mag brass, polished, sorted by headstamp
Some jacketed 44 cal bullets (46 ct Hornady XTP 240gr #44200 & 70 ct Nosler 200gr HP #44846)
6.6 pounds of 9mm brass, polished.
Partial lb (maybe half) of Blue Dot powder (20 years old)

What I am looking for:
Forster (preferably) or Redding (2nd choice) FL dies (non bushing) for .243, .260, and .308.
Forster seater (Bench rest or micrometer) for 0.243.
Would consider bullets for the above (hunting and target).
Reloading goodies? (presses, concentricity gauge, watchu got?)
Cash money dollars

Thanks for looking.
 
Fed 210m or CCI 400 preferably, but am open to most small or large rifle primers due to the times. And hopefully at pre-covid prices of 1000 primers for a pound of powder.
Thanks for the offer however i am still getting h1000 at pre stupid prices LGS. I’m thinking primers are more valuable due to different useable powders per caliber.
 
Interested in trading the following for 190 gr and some 220 gr 30 cal SMK ,H 1000 powder and Black Hills 300 Win Mag 1st fired brass.

30-06 LC match brass New boxed x100
30-06 LC 1st fired , rifle , match brass
M 118 LC Match bullets ( 173/175 gr not sure which ) bulk pack from LC
45 acp 1st fired brass mostly WCC or W-W
9mm 1st fired brass mostly FC nickel. I hhink
223/5.56 range brass mixed some 1st fired some reloaded
38 spl brass mixed range brass
WC 844 ( H 335 ) powder new not pulled, cross listed
30 carbine LC ammo in clips and bandoleers mfg 1960s
Brass is not processed or cleaned in mot cases
Other things I’m sure that i have forgotten contact with needs or wants
I need to get rid of things
Thanks
Rad
 
Looking for some match grade 22lr. I want to start shooting the nrl22 and prs22 matches.
 
Location? I'm in Illinois (unfortunately) but will be going to shoot at Red Brush this Sunday. I have a few bricks of Wolf Match Target Extra and a brick of Eley Target in my retail shop.
I shoot at Red Brush. Don’t guess you have any 6.5 ELDM, do you?
 
I have a AMP Mk2, and a wet tumbler, I’m willing to process small batches in trade for reloading stuff. Soon I’ll be set-up to trim common cartridges also but I need time to make sure my Giraud PT is set to the correct lengths.

I’m in Franklin.

For negotiation purposes I consider a small batches as:

Magnum rifle 50-250 for both.

Small rifle like 5.56 up to 500 for both.

Pistol cases without annealing up to 5k.

I don’t want to get overwhelmed, with too much brass to handle in my spare time.

My needs include M118LR, or BTHP 175 grain sierras, or federal match or CCI primers; varget, H1000, H4350, CFE223, tite group pistol powder.

I would also consider misc stuff if it has trade value, or I can stock up for future loads.
 
Last edited:
  • Like
Reactions: sheepdog697
I have a sealed 8lb jug of h4350. Looking to trade for small/large rifle primers.
I’m in Southern Indiana, 40min north of Louisville
 
  • Like
Reactions: operatorj
West Lafayette here.

What I have:
Lee FL and seating dies for .243 and .308.
RCBS carbide 3 die sets 9mm & 44mag/spec
700+ Bushwacker Bullet Co (Missouri Bullet Co) hard cast lead 240g SWC 0.430 (44 cal) https://www.grafs.com/retail/catalog/product/productId/10672
835 pieces of 44mag brass, polished, sorted by headstamp
Some jacketed 44 cal bullets (46 ct Hornady XTP 240gr #44200 & 70 ct Nosler 200gr HP #44846)
6.6 pounds of 9mm brass, polished.
Partial lb (maybe half) of Blue Dot powder (20 years old)

What I am looking for:
Forster (preferably) or Redding (2nd choice) FL dies (non bushing) for .243, .260, and .308.
Forster seater (Bench rest or micrometer) for 0.243.
Would consider bullets for the above (hunting and target).
Reloading goodies? (presses, concentricity gauge, watchu got?)
Cash money dollars

Thanks for looking.
I’ll take the seating dies

im in south bend
 
Figured id start this for indiana. Have some h4350 for trade for rl26/ retumbo/ h1000.
I have plenty of R26. Im in northeast Ohio(Akron) but will be traveling to southern Indiana (Newberry) in March. If your in the area and still need some, I'd be willing to trade pound for pound
 
  • Like
Reactions: Axel314
Location? I'm in Illinois (unfortunately) but will be going to shoot at Red Brush this Sunday. I have a few bricks of Wolf Match Target Extra and a brick of Eley Target in my retail shop.
I'll take the eley if you still have it. I'll be at red brush Sunday.
 
Status
Not open for further replies.