• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Rifle Scopes Official Zero Compromise Optic News & Updates

My Spuhr - I think it’s the 6602? - has an integrated level. That said I don’t like a small level below the scope; I like the MK tube-mounts.
Yeah the 6002 has the built in level also. I’m looking for something I can view with my opposite eye as I’m shooting.
 
Finally got the tracking information on the zco527 in mpct 3 and my spuhr 6002. It’ll be replacing my vortex razor gen II. What’s everyone running for a bubble level? I’ve looked into the mk machine and other tube mount ones, but seen flatline made a Spuhr mounted setup. Is anyone running the flatline or Spuhr mount level setup on their rig? View attachment 7583330
You’re gonna be blown away.
 
  • Like
Reactions: pewpew300WM
MKmachining bubles are awesome, billet ones specially.
I love the tube mounted, or if you can, you are also able to mount it on picatinny, 2 options.
Package of Tyler is on it´s way, can not wait to mount throw lever and bubles to my ZCO 527 scopes, and those MKM flip ups too ;)
 
IMO this is going to be the ticket for bubble levels right here from Flatline Ops with our ZC527 for them to develop it :)
"
⚡️
NEXT UP
⚡️
in development - so close... 36mm Halo-X for the ZCO. Launching Early 2021 - Keep an eye out.
👁
" - FLO

128254137_3519169688159667_7241345955612344390_o.jpg
 
IMO this is going to be the ticket for bubble levels right here from Flatline Ops with our ZC527 for them to develop it :)
"
⚡️
NEXT UP
⚡️
in development - so close... 36mm Halo-X for the ZCO. Launching Early 2021 - Keep an eye out.
👁
" - FLO

128254137_3519169688159667_7241345955612344390_o.jpg

Ordered one a few months back! But I wish they made it in their Sniper series!
 
  • Like
Reactions: SourMash and Dooby
Yeah the 6002 has the built in level also.

Some do, some don't and I don't know why. If you look at the 6002 on Spuhr's website it says "Note: does not come with bubble level."

My 6002 does not have a level and it looks just like the one on the Spuhr Web Shop but there are some here with 6002's that do have a built in level. I don't know when this change was made but it seems odd.
 
Last edited:
  • Like
Reactions: pewpew300WM
Some do, some don't and I don't know why. If you look at the 6002 on Spuhr's website it says "Note: does not come with bubble level."

My 6002 does not have a level and it looks just like the one on the SPuhr Web Shop but there are some here with 6002's that do have a built in level. I don't know when this change was made but it seems odd.
Yeah I just received mine and it has the built in level. I like the idea of the spuhr mounted one or flatline ops one but for a simple 2 bolt plate and level it’s $100. Seems a bit pricey for sure.
 
Yeah I just received mine and it has the built in level. I like the idea of the spuhr mounted one or flatline ops one but for a simple 2 bolt plate and level it’s $100. Seems a bit pricey for sure.

I like the Tango SM that mounts to the Spuhr mount and then folds out of the way when not in use. The other option is the LRA Send It with the Spuhr mount, it's digital and more than double the price with the Spuhr bracket but it's pretty easy to read and still provides a mechanical level as well.
 
  • Like
Reactions: pewpew300WM
So....I saw way earlier in the thread where someone already asked jokingly I believe, but seriously what's the chances of working out a trade in deal for one of these ZCO 527's? LOL
 
I like the Tango SM that mounts to the Spuhr mount and then folds out of the way when not in use. The other option is the LRA Send It with the Spuhr mount, it's digital and more than double the price with the Spuhr bracket but it's pretty easy to read and still provides a mechanical level as well.
Yeah, it’s a shame the Tango SM isn’t less than half that price. I mean, get real. At some point it’s just calling a spade a spade.
 
  • Like
Reactions: pewpew300WM
I want to give a big shout out and thanks to Richard and his crew over @CSTactical for helping to make sure that my optic arrived in time for a class this weekend. I can't recommend these guys enough, they more than exceeded my expectations by jumping through hoops to meet a tight deadline. First rate customer service and now they've earned my business for life. I am looking forward to getting to the range tomorrow to get this bad boy sighted in.

g1sfA1w.jpg

Y8WCLZS.jpg
 
Last edited:
  • Haha
Reactions: CSTactical
If I did that in my driveway the cops would be there in 3 minutes lol.
 
  • Haha
Reactions: CSTactical
I ran the ZC527 MPCT3 in the CR2/Galli class this weekend and it was outstanding. Everyone that looked through it was wowed and it most certainly had the best image through the mirage at 800. We ran an unknown distance drill and I employed the Fallopian Funnel of Death to mil/measure my targets and it worked extremely well getting me first round hits out to 700-ish. I couldn't be happier with this piece of glass, she's a keeper.

VmDcXKs.jpg
 
I ran the ZC527 MPCT3 in the CR2/Galli class this weekend and it was outstanding. Everyone that looked through it was wowed and it most certainly had the best image through the mirage at 800. We ran an unknown distance drill and I employed the Fallopian Funnel of Death to mil/measure my targets and it worked extremely well getting me first round hits out to 700-ish. I couldn't be happier with this piece of glass, she's a keeper.

VmDcXKs.jpg


Awesome :cool:
 
So I’m having a small issue with my zco/mpa matrix. I need my scope to move back a skosh for proper eye relief but I’m out of room.
I’ve shortened my lop about as far as it will go, moved my rings back as far as they will go, and slid the scope back as far as I feel comfortable. I don’t want to move the rings any closer to the turrets. I’m using a zco-527 in ARC rings on a vudoo v22 in a mpa matrix chassis. The vudoo uses a proprietary rail so getting a different one isn’t an option. any ideas on other mounting options?
 
as you can see my rear ring is as far back as it’s going to go so my only option would be to slide the scope back. Right now there’s about 1/4 inch left to slide before it hits.
 

Attachments

  • C8EB9C48-8C10-4A48-8190-901885DB473F.jpeg
    C8EB9C48-8C10-4A48-8190-901885DB473F.jpeg
    416.4 KB · Views: 70
as you can see my rear ring is as far back as it’s going to go so my only option would be to slide the scope back. Right now there’s about 1/4 inch left to slide before it hits.

I had the same issue, I ended up just shortening my LoP. Right now I have my turrets basically touching my rings, and haven't noticed any sort of binding issues. (I'm running a Spuhr though).

1619550072771.png
 
  • Like
Reactions: JohnTheFisherman
I had the same issue, I ended up just shortening my LoP. Right now I have my turrets basically touching my rings, and haven't noticed any sort of binding issues. (I'm running a Spuhr though).

View attachment 7613380
I actually got the arc rings because they were the thinnest 36mm out there. I noticed on pics with larger mounts there’s about zero room for adjustment.
my lop is as about as short as I can get it while still being comfortable. I think I could shorten it another 1/8” maybe.
I wish the tube was about 1/4” longer.