Latest activity Postings Media Resources Featured content Achievements About Feedback Stats
-
-
USMCSGT0331 reacted to FF05's post in the thread MDT introduces the HNT26! A 26 Ounce Carbon Fiber Hunting Chassis. with
Like.
This is my current set-up. I machined a long action rail that locks into the m-lok on the forend. -
USMCSGT0331 replied to the thread MDT introduces the HNT26! A 26 Ounce Carbon Fiber Hunting Chassis..LRI did all of the work on the barreled action for these three HNT26 hunting rifles. My rifle's specs: Remington 40X titanium long...
-
-
USMCSGT0331 reacted to buffalowinter's post in the thread Found a 1903 Springfield with a massive barrel with Like.
Springfield 1903 International with double set triggers that I built. 30-06 Double set trigger Martini 300m Schuetzen rifle 7.5...
-
USMCSGT0331 reacted to ArmedGinger's post in the thread Found a 1903 Springfield with a massive barrel with Like.
Ok I love the old "spotting scope", that is just the best. The first picture had me fooled thinking it was an original old photo until I...
-
Using that stock versus the McM HTG is akin to running a Leupold scope with MOA turrets and mildot reticle, because that's basically...
-
USMCSGT0331 reacted to cplnorton's post in the thread USMC M40A1 Return Stock Case Study (The Progression of McMillian Stocks) with Like.
Tfont48, your 4359 is for 224359 which was built in March 1978. Thanks for posting it! I will add it in the pics above. :)
-
USMCSGT0331 reacted to tfont48's post in the thread USMC M40A1 Return Stock Case Study (The Progression of McMillian Stocks) with Like.
Last four inside the stock: 4359 I posted some of the other markings as well. I was told the SS (Scout Sniper) 172 was in reference to a...
-
USMCSGT0331 reacted to cplnorton's post in the thread Found a 1903 Springfield with a massive barrel with Like.
It's odd the barrel is only 22''. Most of the Heavy barrel M1903's used in competitions were 28'' or 30'' barrels. I've seen some...
-
Don’t know if this was shown before, but it appeared in my feed from an instructor I know from Texas.
-
USMCSGT0331 reacted to Random Guy's post in the thread U.S. Army/Navy/USMC M14-based sniper and DMR/SDM rifles circa late-1960s to late 201Xs with Like.
Finally got this M39 replica finished with the fake M14 selector lock installed. Now it’s ready for some range testing.
-
USMCSGT0331 replied to the thread XM-3 on CMP, what’s the story behind these?.Definitely not, it would be unusable. However, an angle grinder solves this issue extremely quickly :cool: It would probably work with...
-
USMCSGT0331 replied to the thread XM-3 on CMP, what’s the story behind these?.I just look through my safes to see if I had an M5 sitting around, and then I realized that the last M5 I had is now on the SSA M40A5...
-
USMCSGT0331 reacted to Infidel4life11's post in the thread XM-3 on CMP, what’s the story behind these? with Like.
Dooooo it! Throw a badger m5 on the new green one!
-
USMCSGT0331 replied to the thread XM-3 on CMP, what’s the story behind these?.Jokes on you, after the next MSSHF rifle raffle I'm leaving the forums, and you'll still be stuck with that crappy rifle! :ROFLMAO: I...
-
USMCSGT0331 reacted to Infidel4life11's post in the thread XM-3 on CMP, what’s the story behind these? with Haha.
Ima buy a BG defense and post it in every clone thread and tag you 🤣
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
