Recent content by 2_many_dogs

I run a fastfire-2 on a 45 degree mount off the top rail. I zero at 100.

The Ray-Vin stand. Ray-Vin Stand - Scopes & Stands | Creedmoor Sports Not tacti-cool, but perfect for position shooting.

Nice! Thanks - I'll go look I to those when I go visit Raleigh.

Thanks, guys. I'll check out Woody's too.

hi folks - i'm not a new member, but it looks like i'll finally be able to put kalifornia behind me. i was born here and grew up here and have realized, sadly, it's just not the same as when i was a boy and ronald reagan was governor. it looks like i'll have the option of going to either san...

I've tried that - running a deeply trimmed .308 case right into the 6.5CM die with a fair amount of lube on the case wall. I got cases that were about right, but huge dimples in the necks. These were not lube dimples, but the way the case crushed into the die. It seemed to me that it needed to...

I've tried it with rings and a Larue LT111 unified mount. They both work fine - I need to rezero after remounting as both return close to zero but not right back on. The Larue is easier to swap since it has the QD levers.

champion's choice has flip up covers that go on your eye pro: Polarized & Colored | Champion's Choice Champion's Choice

the target shooter's trick is to just put some cellophane (clear) tape over part of the off-eye lens. both eyes open and both pupils are open the same so no eye strain. but because you can't see thru the off-eye lens, you are forced to use the other side. but because it just over part of the...

Don't forget to leave a little room for scope caps.

The last Jewell trigger I handled was 100% Jewell - including its own sear.

Padded vtac sling might work for you. There are several ways to low crawl with a rifle - depends on how low you need to go. A simple middle crawl is to cradle the rifle in the crook of your arms, using your elbows to pull and legs to push. A low crawl is becoming one with the ground - grab...

Fruit/vegetable dehydrator from Harbor Freight over a box fan - I use some PVC pipe to span the box fan face so the dehydrator doesn't press on the fan hub. Low heat for the dehydrator which has an open bottom section. Doesn't take too long before warm dry cases come out.

what is "excellent, good or not worth having" depends on how you intend to use it. for example, if you're going to mostly do belly shooting, having a tool-less adjustable stock might not be worth having but if you're doing a lot of position shooting it might be. or, if you're humping that...

Pacific tool and gauge sells a couple of models of DM bottom metal that fits a BDL inlet. I don't know much more about them, so you should do a little digging. Pacific Tool & Gauge, Inc. - Remington Performance Parts adding: re-read your post and see you don't want to buy another DM bottom...