Doom

Doom

Full Member Minuteman
Balding Eagle From South of the Mason Dixon Line.
Messages
1,342
Featured content
0
Reaction score
1,165
XP
756
Achievements
1
Level
8
Joined
Last seen

Latest activity Postings Featured content Achievements About Feedback Stats

    • Doom
      Doom replied to the thread Bad SD and ES but good group....
      Your SD and ES variation in velocity is undetectable on group size at 100 yds or meters. In most centerfire rifles a 100ft/sec (30...
    • Doom
      Doom reacted to supercorndogs's post in the thread Why do people load so hot? with Like Like.
      Sure but if you ask a guy why he has a squatted straight piped 2002 chevy pickup. He will never answer microdick. 🤣🤣🤣
    • Doom
      Doom reacted to supercorndogs's post in the thread Expected 30-30 Win Performance with Like Like.
      For 100y shooting 30/30 es/SD arr basically irrelevant.
    • Doom
      Doom replied to the thread Maximizing accuracy.
      Also each references a maximum safe load, which may or may not be at maximum pressure. In fact if you read Hornady they will describe...
    • Doom
      Doom reacted to straightshooter1's post in the thread Maximizing accuracy with Like Like.
      First. . . note a difference between "accuracy" and "precision": I would say that a full or nearly full load tends to be more...
    • Doom
      Doom reacted to Spencercoc74's post in the thread SAMMI spec with Like Like.
      Thank you for the explanation.
    • Doom
      Doom replied to the thread SAMMI spec.
      2.015" -0.020 is 1.995" to 2.015". Min chamber is 2.025" so you have a minimum clearance of 0.010". Tolerance on case is only negative...
    • Doom
      Doom replied to the thread Dirty brass.
      Wet tumbling is an iffy method because you are never sure exactly what minerals are in the water which may affect the brass. Dry...
    • Doom
      Doom reacted to Herb Stoner's post in the thread Primer Sorting for Precision Loads with Like Like.
      I'm curious - how you were able to determine it was a primer issue?
    • Doom
      Doom reacted to SRPowah's post in the thread Why do people load so hot? with Like Like.
      yeah this is kind of what it comes down to for me... Im also a rational thinker like you, but do love pushing for high scores where...
    • Doom
      Doom reacted to Snuby642's post in the thread Why do people load so hot? with Like Like.
      @lash gets it. Many shooters have no viable need to burn 3 barrels a season or even rule the local club leader board. Then there are...
    • Doom
      Doom replied to the thread Seating question.
      Sounds like your bullet may be hitting the seating stem with the point and not the ogive.
    • Doom
      Doom reacted to supercorndogs's post in the thread Reloading and Tuning my 16" AR-10 with Like Like.
      You should be measuring a fired cases to figure out how much bump you need. You shouldn't be neck sizing only for a semi auto. As...
    • Doom
      Doom replied to the thread Manual dump + trickle.
      No need to measure weight of each manual throw.
    • Doom
      Doom reacted to straightshooter1's post in the thread 308 FGGM brass with Like Like.
      I've use a lot of Federal brass over many years in my .308. In the last couple years I've not used them much . . . just on occasion...
    Show older items
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back
Home
Forums
Merch
Alerts