Recent content by AR15barrels

I took apart a Browning BAR MK3 today and threaded the barrel. There are two pinch bolts that hold the barrel into the reciever. Once you loosen and remove them, the barrel will slide out as long as the bolt is unlocked from the barrel.

Must be someone else. I'm keeping busy with barrel work on bolt guns as well as autoloaders. If you have all your parts, I can put a barrel on an action for you in a few hours. Just contact me by email to setup an appointment to come over.

Re: Detachable magazine for Remington 700? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: brunop</div><div class="ubbcode-body">The action screws are loose in the stock holes, so step one was to lathe aluminum 'pins' that fit exactly the diameter of the stock...

Re: Detachable magazine for Remington 700? While they are not popular here, the HS Precision detatchable bottom metal should drop right into your PSS stock without any inletting. Bottom metal with a 10rd mag can be had for about $280 from Midway...

Re: EGW base for my Savage MkII BTVS Wes- Need to run some numbers past you... Your scope is supposed to have 40 inches of adjustment at 100yds. Let's ignore the difference between inches and moa for a moment to make it easy to think logically and call it 40moa. So you have 20 moa up and 20...