• Winner! Quick Shot Challenge: Caption This Sniper Fail Meme

    View thread

Recent content by Bevan

  1. B

    6gt

    Precisely. I'm using a comparator on the case shoulder. The factory brass that I measured was about 1.407" (this is clearly just a reference measurement relevant to my measuring system only). I don't have any more new brass to measure to double-check this. Most once-fired brass is in the...
  2. B

    6gt

    Just ejector marks I won't go .236" on my next barrel.... it was a case of taking what happened to be in stock.
  3. B

    6gt

    2600-2680 fps 32gr-33gr varget with either bullet and 2700-2780fps 37gr-38gr 4350 with 108 ELD
  4. B

    6gt

    I'm shooting an 18" 1:8" twist Brux barrel with .236" bore. I'm bumping shoulders about 0.002" but it's hard to say precisely as it appears that the brass has fire-formed various amounts since new. The max I've measured is about 0.008" shorter on a new case vs a 1x fired case. I've shot...
  5. B

    6gt

    I am getting sporadic ejector marks on my brass with loads that are under the Hodgdon book max. No carbon ring (checked with borescope) Alpha brass - 1x fired. Read somewhere this is normal with Alpha brass. Anyone else seen this?
  6. B

    6 Creedmoor Berger 105 hybrid help

    They all look identical. Pick any and shoot it.
  7. B

    ELDM lot-to-lot variation

    I'm shooting the 108gr ELDM from a 6mmGT in a Brux barrel. I tested loads with one particular box to check if my barrel liked the bullet - shot 3x 10rd groups around 0.5-.0.6 MOA group size (0.05 - .06MRAD mean radius). Seemed all good, so I purchased 1000 bullets of a different production lot...
  8. B

    223/for distance

    Aside from the difficulty of getting consistent velocities with .223, and the lower impact signature, the 88s or 85.5s should be in the ballpark of being reasonably competitive with the 6mms, with some serious advantages in recoil & cost. I'll probably try a barrel set up for 88s when my current...
  9. B

    223/for distance

    I guess a person can always shoot 88s in Open
  10. B

    223/for distance

    Anyone know why tac class in PRS is restricted to 77gr max ?
  11. B

    Wet Mounting Scope Mounts - Where It All Started

    So we can avoid the issue entirely with direct-mount rings? Talley ultralights and away we go I suppose
  12. B

    Rifle Scopes Apex Optics Hunter 3-15x44

    Anyone have any real experience with this? Any issues? Looks like a potentially good option in the lightweight FFP category, if it works well.
  13. B

    Nightforce | Shot Show 2025

    That'd be cool. 2-12 or 3-18 NX6. 30mm, 650gm.
  14. B

    One-Day Range Load Development

    the takeaway is - stop trying to optimise with invalid tests. Decide what you require, test if you have it, move on and use it.
  15. B

    One-Day Range Load Development

    I don't give a toss about which load is "the best" , I just want a load that "meets requirements"
See more
Top Bottom
Back
Home
Forums
Merch
Alerts