bgavin's latest activity

  • B
    Berger 130 hybrid
  • B
    bgavin reacted to Doc68's post in the thread Saw this gem this morning with Like Like.
  • B
    Been in a wind kick lately. Here’s what you really need to know about wind when at a match. And it’s not how to read wind down to...
  • B
    Sadly nothing will happen to them
  • B
    bgavin replied to the thread OCW help.
    I thought so to and have been able to narrow it down with my magnetospeed but couldn’t with the ultra 7 this time.
  • B
    bgavin replied to the thread OCW help.
    it’s a Krieger from John at Keystone, m24 and 26 inches. This was at 100. I’ll try further out this weekend. Thanks
  • B
    bgavin replied to the thread OCW help.
    I had 3 out of 5 rounds at 40.9 an 41.2 with ejector marks and one was a little stiff on open but after that everything looked good on...
  • B
    bgavin replied to the thread OCW help.
    I wish I could duplicate the factory Berger 130’s That was 5 shots and close to the best I’ve shot with my hand loads in this rifle.
  • B
    bgavin replied to the thread OCW help.
    👍
  • B
    bgavin replied to the thread OCW help.
    I always use my magnetospeed working up a load but my ultra 7 came in. I have the sporter version and a wiser precision mount on a mpa...
  • B
    bgavin posted the thread OCW help in Sniper's Hide Reloading.
    Here is a ocw test on my 6.5 Creedmoor. Started at 40.0 in .3 grain increments to 42. The last one is .2. Using h4340, lapua brass and...
    • D5542D48-99AF-4409-8C78-D2A534FD6F3F.jpeg
    • B76EADFA-4DB6-4EC4-BC57-63CC618DE26B.jpeg
  • B
    bgavin replied to the thread 6mm BR.
    Not sore on reamer and no mention of neck turning. Called bugholes and told them I wanted a 6br and I wanted to use lapua brass and...
  • B
    bgavin reacted to hookedonbrass's post in the thread 6mm BR with Like Like.
    i recommend getting harrels fl bushing sizing die. you shoot 3 rounds and send them your brass. they send you a die that closest...
  • B
    bgavin reacted to Doc68's post in the thread 6mm BR with Like Like.
    Those are the dies I have, just non bushing dies. It has the micrometer seating die. I did have to take a bullet and 600grit sandpaper...
  • B
    bgavin reacted to 47guy's post in the thread 6mm BR with Like Like.
    .266...if your going to run a mandrel go .265