Recent content by Borg

  1. B

    Stainless Steel Media Testimonials

    Re: Stainless Steel Media Testimonials <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: The Mechanic</div><div class="ubbcode-body">A couple of people on FCSA have used the cheapo harbor freight ones, removed the blades inside and put in some rubber and plastic...
  2. B

    Stainless Steel Media Testimonials

    Re: Stainless Steel Media Testimonials I'm finding I'm not liking the cement mixer as well as I thought I would. The problem is the media will go to the bottom(big end)and the brass stays up front and doesn't mix well because of the slant you have to have on the mixer to keep the...
  3. B

    Anyone using vintage(68-69) LC .308 brass

    Re: Anyone using vintage(68-69) LC .308 brass You might also check to see if the flash hole is centered, had that problen many moons ago. Borg
  4. B

    fired case won't fit after resizing ?

    Re: fired case won't fit after resizing ? I had a Rem that had the same problem, found out that the chamber wasn't in alignment with the bore/bolt. Check the base of the case above the web before sizing to see if it bulges out to one side. a large chamber will do this also. You might also...
  5. B

    Anybody recognize this powder thrower?

    Re: Anybody recognize this powder thrower? Lyman used to sell a larger hopper, it's about 10" long. I don't know if they still make one, but you can get a piece of, I believe is Lexan from some plastic producers that will fit. It's just wedged in. Borg
  6. B

    40x vs 40xb differences

    Re: 40x vs 40xb differences The 40X (721) is based on the forerunner of the 700 (40XB) The 40X has a stright bolt handle, the XB has a swept back handle, the 40X has a different safety than the XB, the 40XB is a heavy barrel, the 40X has a standard barrel. HTH
  7. B

    .223 seating issue need help

    Re: .223 seating issue need help Pull your expander ball out of the sizer and measure it, that could be a problem, if correct, look elsewhere. If chamfered, then the first thing that touches the bullet would either be a ridge inside that would shave, or the neck that wouldn't, assuming the...
  8. B

    .223 seating issue need help

    Re: .223 seating issue need help Check the mouth of the case to see if there is a raised ridge below the inside chamfer. Depending on how hard or the tool itself, it can leave a ridge inside, and it will shave copper. Use a 10X loupe to check, eyes sometimes miss it. Borg ETA if you tumble...
  9. B

    Looking For Olympic Front Sight For my 40X LR

    Re: Looking For Olympic Front Sight For my 40X LR The front sight with the level is made by Mid Thompkins, uses regular Redfield inserts. Borg
  10. B

    Stainless Steel Media Testimonials

    Re: Stainless Steel Media Testimonials <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AlliedArmory</div><div class="ubbcode-body">I have a Model B (regular speed) and am having some discoloration on my once fired brass. See pic below. Do I just need to tumble...
  11. B

    Cut Shells (The Poor Mans Slug)

    Re: Cut Shells (The Poor Mans Slug) We used to do this to scare the ducks and geese to our side of the lake, shoot on the opposit side of them to scare them to us. That was in the mid '60's Sometimes with a full choke, they would come apart and hold a tight pattern shot group. Borg
  12. B

    Stainless Steel Media Testimonials

    Re: Stainless Steel Media Testimonials No peened case mouths just from the cases falling farther? Borg
  13. B

    Stainless Steel Media Testimonials

    Re: Stainless Steel Media Testimonials Same here. Also, do you find that it peens the mouth of the case more? Is that a plastic water bottle in the first pic or ?? Borg ETA What's the RPM on that mixer?
  14. B

    Stainless Steel Media Testimonials

    Re: Stainless Steel Media Testimonials You will be able to put more cases/media in the Thumblers than the RCBS, the RCBS is angled and not level. Just thinking, Harbor Freight has a $20 coupon on their site, and their small cement mixer is on sale for $149, sounds cheaper than a Thumblers...
  15. B

    Stainless Steel Media Testimonials

    Re: Stainless Steel Media Testimonials I'm still waiting for the pics of the cement mixer and SSM
See more
Top Bottom
Back
Home
Forums
Merch
Alerts