• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Recent content by burkeknives

  1. B

    Suppressors Thunderbeast 30-P, on 300 win mag.

    I did not even think about that, makes perfect sense. Im not loosing sight picture, just felt much more solid of a kick, not the quick hit I am used to. Thanks!
  2. B

    Suppressors Thunderbeast 30-P, on 300 win mag.

    I got my can after a LONG wait, purchased it for my 300win mag. Shot it a bit and was happy to see no POI shift, but the damn thing kicks harder! Anyone else encounter this? I am running 220SMKs at 2900fps, out of a 8 twist Rock creek, normally with a 3 port break.
  3. B

    Gunsmithing Bandsaw blade question

    Just order a bimetal blade from MSC, then you will have no problems. And yes, run it slow. I use them to cut all types of steel, S7, 3V, A2, on and on. I am assuming it is annealed, non hardened? If you have any questions, shoot me a PM.
  4. B

    Gunsmithing MK13 Mod 5 and MK13 Mod6 inbreeding. . .

    Pure badassery right there!
  5. B

    Gunsmithing L/H Stiller TAC 30 TITANIUM Bedding Block...

    Good stuff! Thank you sir!
  6. B

    Gunsmithing L/H Stiller TAC 30 TITANIUM Bedding Block...

    Chad, that is some of the best work I have seen in Ti! Would you please forward me your feeds, speeds, and the tools you used. I cut lots of 6AL4VTi, LOTS, never came out that clean!
  7. B

    Gunsmithing Savage 110 Mcree

    Damn fine job!
  8. B

    Gunsmithing Hobbyist equipment, 3-1 granite Mil/Lathe/Drill press?

    This is as real as it gets!!!! Wish I had this info back in 2003, when I transitioned form a cop to a full time custom knife maker! I only spent about $70,000.00 learning this lesson.
  9. B

    Gunsmithing AX chassis questions?

    I am building a 243AI, on a Stiller Tac30, with Bartlien straight taper #9 barrel. I want to put it in a AX chassis, will I have any issues? I will be running a a Nightforce ATACR optic, 5-25X56. Will ring height be a problem? Also, will the AX us standard AI mags? Thanks
  10. B

    Gunsmithing Grip reduction question.

    What are you guys spraying the frames with, Cerakote air dry?
  11. B

    Gunsmithing Grip reduction question.

    Re: Grip reduction question. Thanks for the info, I will try the Marintex.
  12. B

    Gunsmithing Grip reduction question.

    Before I ask, I want to say I have looked over the net, and found the most common answers. I would like some good info on this from the guys here that have already done this. What is the best material to use for creating the beavertail extension, and filling the cavity in the grip, on the...
  13. B

    Gunsmithing E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build Now that is just bad ass!
  14. B

    GAP 300 WM build.

    Re: GAP 300 WM build. I have a 1-8" twist Rock in my 300. I love it, I can run everything from 180, up to 240. With that said, I would go with a 1-10" for sure. Also, I run a McRees 3 port muzzle brake. I can shoot all day long, recoil is nothing.
  15. B

    Gunsmithing E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build When is a good time to call ya? Want to talk about a build. Thanks Jim Burke
See more
Top Bottom
Back