Recent content by ClangClang

  1. ClangClang

    Customer Service of S&B vs Kahles vs Steiner

    I've warrantied a couple Leupold items in the past year. Pretty simple. Fill out the form on their website, get an RMA, wait 3-5 weeks, receive repaired item back cleaner than new. No questions asked. Technically their warranty is lifetime on mechanical items and 2 years on electronic items...
  2. ClangClang

    Questions about Voestalpine/CAT/CGS

    What is Wain/CAT'S beef with Slade and SC Irregulars?
  3. ClangClang

    Run N Gun rifle - Plan B/Rearden vs Area 419 Hellfire

    @hlee i think you're missing the fact that to "Just torque the brake to 30 ft-lbs and twist on suppressor hand tight" you still need a vice, a reaction rod, a torque wrench, a crows foot, shims, etc. With a Hellfire, you need.... your fingers. That's it. I appreciate your contribution but a...
  4. ClangClang

    Run N Gun rifle - Plan B/Rearden vs Area 419 Hellfire

    I'm not sure I follow. With a 1/2x28 adapter in my can, I would need to remove the brake installed on the barrel whenever I wanted to mount the can. Then I would need to re-shim, re-torque, and re-rocksett the brake as soon as I take the can off. Unless I'm missing something?
  5. ClangClang

    Run N Gun rifle - Plan B/Rearden vs Area 419 Hellfire

    BLUF: Does anyone run Hellfires on lightweight gas guns? I see them all the time on heavy bolt guns. I'm trying to figure out if my use case is appropriate. I've just picked up my first suppressor (B&T Print-XH) and so I need to switch my muzzle devices over to something compatible and have to...
  6. ClangClang

    SOLD Hornady 6 ARC 108 ELD-M

    Make sure to hit the "report" button in that PM from the scammer so his account gets banned
  7. ClangClang

    2024 Legion Memorial Run and Gun, Honoring the Fallen as a Family

    Awesome, glad you made it. Looking forward to saying hi. And yep, ill be running on Fri and ROing on Sat/Sun.
  8. ClangClang

    Pouring a 30"×40" concrete pad on top of concrete floor?

    This guy concretes. You probably have a bunch of bow kills too.
  9. ClangClang

    Pouring a 30"×40" concrete pad on top of concrete floor?

    @Aftermath I thought about the moisture issue and just framing out a base, that but I want this safe secured. I'm not concerned about anyone dragging this safe back up the stairs, but an unsecured safe can be tipped over and pushed onto its back in 60 seconds and then it's very vulnerable to a...
  10. ClangClang

    Pouring a 30"×40" concrete pad on top of concrete floor?

    @sirhrmechanic I want to pour a raised pad for protection from water. Not because the existing slab needs reinforcement. Just in case I ever have a burst pipe or something stupid. Additionally, my insurance specifically requires any items stored in the basement that I wish to be covered under...
  11. ClangClang

    Pouring a 30"×40" concrete pad on top of concrete floor?

    Luckily my basement is very dry. Averages around 45% RH in the summer, around 35% RH in the winter. I keep one of the rechargeable EvaDry units in my safe and in the 18+ months I've been in this house, I've never had to recharge it once. Its not showing any absorbed moisture whatsoever. Back...
  12. ClangClang

    2024 Legion Memorial Run and Gun, Honoring the Fallen as a Family

    Did you get a slot this year?
  13. ClangClang

    Pouring a 30"×40" concrete pad on top of concrete floor?

    Thanks, these are really helpful. I'm estimating around 1.75-2PSI (it's a very heavy custom safe). But since all the mixes I look at are 3000-6000 PSI rated, I'm sure it will be fine (assuming proper mix and pour). I'll rent a magnesium float. What's a sidewinder? Google wasn't helpful. I...
  14. ClangClang

    Pouring a 30"×40" concrete pad on top of concrete floor?

    Let me preface this - I dont know shit about concrete. The most I've ever done is mix up some quickcrete in a bucket and poured it into a hole in the ground to repair a fence post. I would like to pour a 30"×40" pad, 6" tall, in my basement utility room to elevate a gun safe to protect it from...
  15. ClangClang

    Accuracy International AT-X

    Nonsense. There is an explicit set of standards for MLOK. The wiki page has a pretty good overview but you can get the entire standard from Magpul. https://en.wikipedia.org/wiki/M-LOK Whether certain manufacturers adhere to those standards is a different story. Ironically, to my knowledge, AI...
See more
Top Bottom
Back
Home
Forums
Merch
Alerts