Recent content by Cmonroe

  1. C

    93 Cummins ?'s

    Hy9 with a boost fooler and small like 80 horse injectors will wake it up a little. If you want it to run put the hy9 on top of a tht 3b with a 16 housing and p pump it with 14mm plungers, cut your dv's in a lathe, put a set a 4k gov springs in and crank them down, extruded hone about 30% some...
  2. C

    Cold Bore Challenge

    One of my friends on here, cansniper, just had this very thing happen to him about a month ago. At 1200 meters with a 12 inch plate in shall we say less that favorable conditions and he walked with the money. While teaching last year I did the cold bore at 1400 on day two of class on a one foot...
  3. C

    Maggie’s Awesome Test Drive

    That made my day.
  4. C

    Range Report 7mm Creedmoor powder and velocity tests

    While the 7x25wssm might be the most efficient of all the cases it is a lot of work and brass life seems to be an issue. The 7cm does achieve great velocity will consuming less powder than most s/a with a .473 bolt face and should be able to shoot past the 4500 round barrel life consuming around...
  5. C

    Range Report 7mm Creedmoor powder and velocity tests

    The shahane runs with larger case capacities and generally speaking doesn't offer decent barrel life.
  6. C

    Range Report 7mm Creedmoor powder and velocity tests

    Funny, I might know a guy with some RL17.
  7. C

    Former LEO gone crazy in SoCal

    Re: Former LEO gone crazy in SoCal <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Turk</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Coloradocop</div><div class="ubbcode-body"> Personally, I'm hoping...
  8. C

    Former LEO gone crazy in SoCal

    Re: Former LEO gone crazy in SoCal <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hueyguy</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Turk</div><div class="ubbcode-body"><div...
  9. C

    Former LEO gone crazy in SoCal

    Re: Former LEO gone crazy in SoCal I'm not going to delve into anyone being right or wrong because his actions are simply wrong. However the LAPD is really trying to just kill this man and it's quite evident he could not surrender if he wanted to do so. They are out to kill him and just...
  10. C

    Wife Orders Husband To Sell...

    Re: Wife Orders Husband To Sell... I hope you gave him a skirt and some panties when you took his rifle. I would have not been able to resist.
  11. C

    ELR .50 Caliber shootout.

    Re: ELR .50 Caliber shootout. Very little, if anything, will be learned about the rifles not having them all shot in the same test conditions.
  12. C

    Forming 7mm Creedmoor brass from 308

    Re: Forming 7mm Creedmoor brass from 308 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: turbo54</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Cmonroe</div><div class="ubbcode-body">I think the small...
  13. C

    caliber chiose. 260 or 7mm-08

    Re: caliber chiose. 260 or 7mm-08 Ok, lots of valid points in this thread. If your going to hand load and want the absolute best of the 6.5 and 7 worlds rolled into one I'm going to highly recommend you entertain going with a 7 Creedmoor. I would also work my brass up from 308 Lapua small...
  14. C

    Forming 7mm Creedmoor brass from 308

    Re: Forming 7mm Creedmoor brass from 308 I think the small primmer Palma 308 brass is proving it can hold the pressure very well. 2800 does not even flatten the primmer.
  15. C

    Suppressors Colorado suppressor dealers??

    Re: Colorado suppressor dealers?? Bear Arms in Windsor should also be considered. Along with Jensen Arms in Loveland.
See more
Top Bottom
Back
Home
Forums
Merch
Alerts