• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Recent content by cowboywhorses

  1. C

    375 SnipeTac or Cheytac?

    If you are going with the Snipe-tac , make sure you get the gen 2 reamer. Dave Viers re designed the first one, the new one has enough case taper.
  2. C

    375/ 338 LM for ELR

    Another would be based of the 500 Jefferies . Takes a lot to neck down , but you could use a 338 laupa action. the case is rebated. This would put you close to 375 chey tac speeds. Put you between the two.
  3. C

    375/ 338 LM for ELR

    I am looking for a reamer to do a rifle. Want it for a elk rifle. Because a light weight 375 Cheytac would work but could be heavier. I have a barrel for both. Also there is a good article on the long range hunting forum. There was a link that used some of Kirbys work with his version . Seems...
  4. C

    N570 load for 375 Cheytac report

    Thanks for the report ,will give it a try .
  5. C

    375 Snipetac seaters or blanks

    Could try Whidden or CH 4d custom.
  6. C

    Dave Viers

    one man shop he has 2 gun build of mine may get a 375 Vm2 next. He is busy ! !
  7. C

    Decapping Die for .375CT/ST

    Also try Dave Veirs from Verisco or Black Diamond Rifles
  8. C

    Initial Reloading Notes for .375 Cheytac for DTA HTI

    Nice job
  9. C

    Wildcat resources

    Ammoguide can help you give a side by side comprasion to other rounds. Good luck God Bless Jeff
  10. C

    358 grant 1.8

    Nice job guys , love the reading material. That is one bad asssss thumper for deer.
  11. C

    Bartlein barrels IN STOCK list just posted (338 & 375 5R incl gain twist)

    It is Saturday so I called and emailed them. Going to grab a couple of them I have a few of there barrels living here in Wisc. Good Luck Jeff
  12. C

    7mm-338 thoughts

    I have a 7mm /338 35 degree improved. It has a longer neck for the big vld. Bought some 192 gr CE bullets very long. Want to throat the bore out so the bullet can be used on the driving band. Needs a bit more twist 1-6.5 would be great only found a 1-7 Proof research barrel. Will try 1-9.3...
  13. C

    7mm-338 thoughts

    Doing a long neck 7/300 Norma 35 degree improved. 300 Norma is easier to neck down to 7. Have 2 guns being built. A reapeter and a mag gun. Mag gun will be light weight. Pm if you need anything for help. Also may do a 7/338 Laupa will see. God bless Jeff
  14. C

    .338 Lapua CIP Reamer - Need some advice

    You can run a throating tool to get more length out of the chamber. This way you can stop that will work for the gun. Also look at get your hands on various reamer prints, someone may have done a longer throat on a different gun already. I like to try and get the boatail of the near the...
  15. C

    New 375 cheytac

    Robert does nice work. Have used him for a few guns already. He will get more for 2014. Wallet is going to get hurt on the next ones. But I love to play. God Bless Jeff
See more
Top Bottom
Back