Recent content by danpd

Ditch the Calvin and your problem will disappear. Get something decent like a Triggertech or a Jewell/Bix n Andy

Even if the Tacsport had the wrong sear in it would make the bolt “stiff” it would just stop the firing pin from falling completely when you pull the trigger. Are you sure your front Action screw isn’t a hair too long and dragging on the side of the bolt head as it goes into battery? Also...

Turn the shank down to match the factory one, it looks terrible otherwise.

Almost ready to go on mine :-), got 400 7mm Saum brass, 18lbs of H1000, A Borden Alpine WSM Repeater, Mcmillan Adj HTG, Brux 5 8.5 Twist Fluted, Sunny Hill Floorplate. Wyatts Box.

Are you rocking the mag up and forward until it clicks in at the front? AX mags are slightly different in the way they lock in.

The TBAS does all the aligning, although the gator is a set tru style it has no boss on its backing plate for the chuck to adjust from. 6 jaw allows you to grip the part securely without marring the surface and with less deformation. I've grabbed AI barrels for threading and it doesn't leave...

Send it back, that is not acceptable in a factory barrel, let alone a "match" grade one.

Single pointing chambers? Or dies?

Re: Cobra Chassis from Eberlestock I handled the Eberlestock at Shot. It is by no way shape or form a piece of chinese junk. The amount of machining that goes into one of these is phenomenal, and the fit and finish were exceptional. I personally found the folding mechanism a little awkward to...

Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build Outstanding, If the Brake wasn't from a different lot/grade of stainless that sucker would be invisible.

Re: Obermeyer Have a read of this, it may answer some questions, or not..... Pressure Trials

Re: Broughton Barrel To allow for the Lapping Bell, basically the point at which the abrasive imbedded lead lap changed direction during the lapping process, and is generally discarded due to being oversized.

Re: Best release agent for bedding? Mc Lube spray mold release.

Re: San Diego Ken's BAD ASS P64 Winny Build Me likey

Re: Stiller Tac 30 action Stiller could chamber a barrel for it without having the action there, they are that confident on the tolerances they hold.