Recent content by davjones

Re: Need a little help with a Sinclair Bipod. I had the same problem with my ACIS stock the only solution that I could come up with was to make an adaptor the fit the rail slot in the stock. I drilled and tapped the adaptor to take a threaded sling stud. So far it seems to work well but...

Re: MagnetoSpeed Chronograph Review Frogman, Can you use the Magnetospeed both with and without the suppressor? In looking at your photos is seems that a spacer could be used inbetween the clamp and the barrel to lower the sensors when not using the suppressor. Dave

Re: MagnetoSpeed Chronograph Review Suppressor Update. Earlier this month I sent this email requesting information on an adaptor for a suppressor. Dear Sirs, I interested in your MagnetoSpeed chronograph but I would like to use it with a rifle with a sound suppressor and without a...

Re: tumbling loaded ammo? This maybe an elementary question but why are you lubing pistol cases? I'm mostly a rifle shooter but it is my understanding that if you use a carbide sizing die on a straight wall case such as the 45 ACP or 9mm lube is not necessary. Is this wrong, even with a...

Re: shaved copper on my bullets I was having the same problem with 223 and the Sierra 80 gr bullets. I switch to a VLD inside the neck chamfering tool instead of the standard one. That stopped the shaving of my bullets. The angle on the VLD tool creates a much more gradual chamfer than the...

Re: LR precision rifle classes in MS, TN, AL, AR area? I'm going to a class give by these folks. You can check out their website at http://drlongrangeconcepts.webstarts.com/

Is there anyone that makes a threaded barrel for the Smith and Wesson M&P 45 pistol that will accept a suppressor?

Re: "Blend" a bench into the living room? LOL That looks like a good setup and the cabinet in not that bad looking on the outside. Couldn't you move the cabinet into one the rooms that you don't use much inside the house? You would then have better conditions to reload in and wouldn't have...

Re: Any Winchester 52 people out there? Here is my 52C setup.

Re: precision rifles... show em Here is my precision rifle, I had the Viperskins Hydrodipped.

I've had my first suppressor for only a couple months so I'm not up on all the laws about transporting one. I live in Missouri and if I wanted to take my suppressor to Arkansas is there any thing special I need to do to stay legal? Suppressor's are legal in Arkansas.

Does anyone know how good LC-77 308 Match Brass would be for long range precision shooting such as F/TR? I used it for years in service rifle competition with the M1A with good results but I'm not sure how well it will work in precision shooting out to 1000 yds as compared to commerical match...

Re: Form 4 wait time This is my time line for the purchase of a suppressor. 04/18/2011: Applied for C & R License 06/15/2011: C & R License Arrives NFA Item: 30P-1 Transfer Type: Form 4 Individual 06/20/2011: Brought Suppressor 07/12/2011: Dealer Transfer Completed 07/30/2011: Mailed Forms...

Re: MIA and RE-15 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Scouter19D</div><div class="ubbcode-body">Well I answered your question that RE-15 is safe, and effective, in the M1A. But to be fair, the typo was kinda a biggie. Lotta people just sit and type...

Re: MIA and RE-15 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: _9H_Cracka</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: davjones</div><div class="ubbcode-body"><div class="ubbcode-block"><div...