Recent content by DBL LUNG
-
D
Maggie’s Whose Top Shot audition video is this?
Re: Whose Top Shot audition video is this? Did he dry fire that bow when he came out of the water? Wish it would have blown up a limb and embedded it in his arm.- DBL LUNG
- Post #31
- Forum: The Bear Pit
-
D
260 Loads Only
Re: 260 Loads Only <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Short Round</div><div class="ubbcode-body"> I wonder if you're getting bit by donuts? I was getting groups that would touch 3 in one place and toss two an inch away together. I was frustrated to...- DBL LUNG
- Post #39
- Forum: Reloading Depot
-
D
260 Loads Only
Re: 260 Loads Only <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ChadTRG42</div><div class="ubbcode-body">You're definitly getting pressure on the 41.0 load. I would switch powders, and see what happens. Try H4831 or R17 or R19. </div></div> What's a good...- DBL LUNG
- Post #37
- Forum: Reloading Depot
-
D
260 Loads Only
Re: 260 Loads Only <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Short Round</div><div class="ubbcode-body"> If I was you (which I'm not ;-)) I'd take the brass from the last batch of firing with the ejector swipes and measure the neck thickness just to see if...- DBL LUNG
- Post #34
- Forum: Reloading Depot
-
D
260 Loads Only
Re: 260 Loads Only 26" Shilen For some reason I can not load as hot as other .260 owners. I start seeing pressure signs (ejector marks) at about 41.0 grains of H4350 with BR2 primers. But, its not every round. I only see ejector marks on every couple of rounds. It seemed like this weekend...- DBL LUNG
- Post #30
- Forum: Reloading Depot
-
D
260 Loads Only
Re: 260 Loads Only Update Shot the same ladder test today with BR2's and CCI 200's. H4350, same loads as before (39.5, 39.8, 40.1, 40.4, 40.7, 41.0). This time I seated the bullets a little further back in the case, thinking that the pressure may have been because the bullet was possibly...- DBL LUNG
- Post #25
- Forum: Reloading Depot
-
D
260 Loads Only
Re: 260 Loads Only Here's some pics of 39.5, 39.8, & 40.1. Are these primers considered "cratered". Ejector marks are shown on some, but not all.- DBL LUNG
- Post #24
- Forum: Reloading Depot
-
D
260 Loads Only
Re: 260 Loads Only Went out and tried some more ladder testing with lower charge weights. Started at 39.5, 39.8, 40.1, 40.4, 40.7 & 41.0 grains of H4350. I am actually still seeing some ejector marks on the brass even at 39.8 grains which is only 2706 fps. Primers are slightly cratering...- DBL LUNG
- Post #23
- Forum: Reloading Depot
-
D
260 Loads Only
Re: 260 Loads Only I picked up 100 new Remington brass today. I am going to run another ladder test with lower charge weights. I didn't think 42.3 grains was near the high end of H4350. I have seen several people running up to 44 grains, so I thought 42.3 would be ok. On my last ladder test...- DBL LUNG
- Post #21
- Forum: Reloading Depot
-
D
260 Loads Only
Re: 260 Loads Only <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: NRAShooter</div><div class="ubbcode-body">The extractor marks are most likely caused by pressure. Your primers appear to also be slightly cratered too. Happens to me too sometimes. I use 44.0 gr...- DBL LUNG
- Post #13
- Forum: Reloading Depot
-
D
260 Loads Only
Re: 260 Loads Only I was able to get out and shoot on Sunday with the different bullet seating depths. The best groups came at .020 off the lands @ 2824 fps. 139g Scenar, Remington Brass, CCI BR2, 42.3g H4350. For some reason on Sunday I was seeing larger spreads in the fps than normal. It...- DBL LUNG
- Post #11
- Forum: Reloading Depot
-
D
gap ar-10 260 remington loads
Re: 260 remington loads I'm running 42.3 grains at about 2860 fps out of my Savage 10FCP with a Shilen 26" barrel. Start low at around 40 grains and work up slowly watching for any pressure signs. At about 43 grains and up the bolt got a little sticky and didn't want to open well. No primer...- DBL LUNG
- Post #2
- Forum: Reloading Depot
-
D
260 Loads Only
Re: 260 Loads Only Just finished loading up 32 rounds of .260. 139g Scenar, Rem Brass, CCI BR2, 42.3g H4350 4 @ 2.252 - .030 to lands 4 @ 2.257 - .025 to lands 4 @ 2.262 - .020 to lands 4 @ 2.267 - .015 to lands 4 @ 2.272 - .010 to lands 4 @ 2.277 - .005 to lands 4 @ 2.280 - .002 to lands 4...- DBL LUNG
- Post #8
- Forum: Reloading Depot
-
D
260 Loads Only
Re: 260 Loads Only <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Triggerhappy</div><div class="ubbcode-body">I jump mine .015" and get .25 - .35moa out to 500yds.</div></div> Thanks for the info. I'm gonna try a couple different seating depths. I have settled...- DBL LUNG
- Post #6
- Forum: Reloading Depot
