• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Recent content by DocB

  1. D

    Range Report 300 Win, 208 Amax, 3300 fps????

    Ry, It's the internet, believe what you wish. Otherwise, not likely. HTH, DocB
  2. D

    30-06 Brass necked down to 25-06

    LH, If they are old enough to have been obtained from M-W, you may wish to anneal them before performing any operations. The current WLR primers are on the small side for primers, you may wish to consider obtaining some CCI #34s and trying them. HTH, DocB
  3. D

    30-06 Brass necked down to 25-06

    LH, The brass will grow while necking down, you'll have to trim it. The neck thickness won't grow much, but you may wish to neck turn before necking down. HTH, DocB
  4. D

    Resize loaded ammo ?

    SWR, Redding body dies will do this correctly, even though Redding will say it's not recommended. I'd be more worried about the lube left on the case rather than the sizing operation. BTDT, DocB
  5. D

    Gunsmithing Rem 700 Jewell trigger problem

    Spot, Tried cleaning with lighter fluid? Thanks, DocB
  6. D

    Using CCI 34 primer in GMM clone

    MJY, I use the CCI #34s as a direct replacement for WLRs in my 308 and 30-06 loads. You may have to back off the load a touch, I'd work up from a grain of powder lower. You're welcome, DocB
  7. D

    Walgreens fires pharmacist with firearm

    been, We would expect better from you. Tango 1 down for the count, tango 2 waiting and hoping for the good guys to show up. DocB
  8. D

    Lapua Senar L vrs regular Scenar ?????

    big, You'll have to test them in your rifle. It will let you know what it likes. DocB
  9. D

    Meplat trimming required before bullet pointing??

    Good day, SWR has it right. Have fun, DocB
  10. D

    Gunsmithing 20" Barrel on 300 Win Mag

    Don, I have a factory Browning Eclipse 2000 in 300 WM which has an 18 or 20 inch barrel, with the vented BOSS on it as I recall it's about 22 or 24 inches. I tested the same load in it as I do for other 300 WMs I have and get about 100 f/s less velocity compared to the other 300 WMs. Muzzle...
  11. D

    Last HR Match of 2014 on 8/23/14

    Good day, Match results went out just after noon today. Please allow 24 hours for you ISP to deliver them before letting me know you didn't receive them. Thanks for your patience, DocB
  12. D

    Last HR Match of 2014 on 8/23/14

    Good day, It was the last match and it was Hot! An amazing turnout for August, we wish to thank everyone for their participation and patience. Match results will be out in the morning, computer already crashed once and I'm tired. Rumors are true, HR will have a new category next year, the...
  13. D

    Last HR Match of 2014 on 8/23/14

    Good day, O.K, most PMs and most emails have a response. Only one sent to the guy who sent four ;-) in two days. I wasn't able to log in last night due to computer problems. BTW, spoke to OSOK and the road is in good shape with the fun slippery spots. Thanks, DocB
  14. D

    Last HR Match of 2014 on 8/23/14

    Good day, All PMs and emails have a reply. Thanks, DocB
  15. D

    Last HR Match of 2014 on 8/23/14

    Good day, All PMs/emails have a response. Please let me know if you haven't received a confirmation. Thanks, DocB