• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Recent content by hengehold

  1. H

    Imperial Sizing Die Wax

    Same here. The wax works really well and is a cheap cost-per-use. I have used One-Shot spray also and left the lube on the case, never tumble the cases to get the lube off after sizing. I noticed that my loaded cases had a very slightly sticky/tacky feel to them. They were definitely not as...
  2. H

    Flying with a Bolt Gun

    I have traveled via plane CONUS and OCONUS for competitions. I use a Pelican case with about 40” internal length and remove action from stock, remove sights, and trigger. I used an aluminum chassis and currently use a laminated wood stock with a V-block. No issues with zeros. When traveling to...
  3. H

    Flying with a Bolt Gun

    This is a non-issue unless you are using bedding without pillars. What action and stock setup are you using? -TH
  4. H

    Not much said about slings. Preferred sling for heavier bolt gun?

    a 1907 service rifle sling is great for carrying in addition to using for support while in position. The link below is to one of the best versions of this that is made. https://erichollisllc.com/products/copy-of-hollis-leather-nm-rifle-sling
  5. H

    Take me to church

    I would recommend staying away from a wildcat cartridge for match use. You will likely need/want to shoot a large amount to improve your skills and it is easier to manage brass when you are not having to form them. There is little to be gained from a wildcat that cannot be achieved with a...
  6. H

    Bartlein Barrels Update

    Good points Frank. Our creation of a mandatory social welfare state for everyone is Ridiculous. thanks for the update on lead times. Bartlein is top notch and will always have my business. -Trevor Hengehold
  7. H

    SOLD WTB: 6.5 Creedmoor die set

    Thank you all, I was able to get what I need from another forum member. I appreciate everyone’s help
  8. H

    SOLD WTB: 6.5 Creedmoor die set

    Looking for a die set, FL sizing die using bushings is preferred. I am willing to buy or trade. Bullets in every caliber and several brass options are available. Please send PM with offers.
  9. H

    Gunsmithing Pacific Tool & Gauge SUCKS!!!

    same thing happened to me about 2 years ago. I emailed requesting a quote and never ordered. Several months later PTG mailed me a reamer THAT I DID NOT ORDER. Must have used a CC from one of my previous orders to charge me. When I contacted them several times about the error by phone and email...
  10. H

    Accessories MDT ESS, REM 700 LA, RIGHT HAND

    Ok, thanks for the info.
  11. H

    Accessories MDT ESS, REM 700 LA, RIGHT HAND

    I don’t know. How can I check? Will a measurement of magwell length answer your question?
  12. H

    Accessories MDT ESS, REM 700 LA, RIGHT HAND

    Open to trades: -Rem 700 short action (RH) -6mm barrel -6mm Bullets