Recent content by Hozzie

If someone has a 3d Printer here is an stl file of a Chamber Block I made. It fits my RimX in a Manners Mini Chassis perfect. I would expect it should fit others as well. I make mine out of PETG.

You do what you want, but I would have it clean as clean can be. Just have him shoot some foulers before starting the tests. You are testing ammo, not your rifle. And you aren't going to shoot a match so there is no worry about first shot fliers. That being said, this is coming from a BR...

Coming back to this and reading it again, one thing some may find useful is they told me the weight of the updated buttstock on the Premier Gen 2 is 8oz less than the current one. In addition there is more weight forward due to the extra width and thickness of the forend so it will hopefully...

No, but didn’t really ask if I could either.

He said they were in production and estimated the end of May for actual availability.

Thanks. I was kind of leaning that way (just getting the Elite), but figured I would get some opinions. The 24" barrel looks good on the Elite. No issues with that. Update: I called to order the Elite and found out the code is only good for the Premier, so will just wait for the Gen 2...

Question for you guys that have used the previous Premier or Elite. I got a 50% cert for an MDT chassis and am trying to decide what to get. Build is going to be a Rim-X with 22-24" 1.25" barrel. I want to get the best chassis that isn't going to require a ton of extra weights to make it...

I'll take this. PM incoming

In general a wind from the right will push a bullet left and high. A wind from the left will push a bullet right and low. The harder the wind, the higher or lower the bullet will go relative to the push. Headwinds and tailwinds can make a bullet go high, low, or seem to do nothing. If you...

What kind of gun? To be honest, if you are using your PRS/NRL gun, a score of 2200 on a regular basis would be exceptional. Outdoors in some wind, you will probably be good expecting 1800-2000 on a regular basis until you get to understand the wind. You need wind flags if you don't have them...

Mine is built on a 2500XS. All, but one of my rifles are based on 2500x's so easy decision when I wanted to build one. I don't have anywhere to shoot IR50/50 close, but pull it out every now and then just to feed it a bit. It's definitely a different experience.

Those particular threads are for a bloop tube. The internal threads on the outer shell are for extra weights.

If your looking for a single shot rimfire action, just buy a 2500x and be done.

At the end of the day, too much emphasis is put on what degree chamber to use. The quality of chambering is much more important than if it is 1.5 degree or 2 degree. A well finished chamber set to either lead angle will perform just fine. I would argue that engraving depth has much more...

What are you guys torquing your barrels to on these? I usually do 300 IN-LB on my 2500x’s but with these being a bigger tenon curious what you guys are doing.