Recent content by huang

Hey, I said I would report back on my new DT SRS A2 barrel. For those of you not waiting for my every word let me expound. I got frustrated with ES tactical's wait time so I contacted a few guys chambering barrels. I finally landed on Bughole (Southern Precision Rifles). Russ and Greg were easy...

From what I have heard it helps to reduce primer deformation and prevents drag on the pin. I'm no expert, but looking at two of my unused bolts there seems to be clear evidence of bushing. Borden is bushing their bolts now. Again no expert.

I think they bush their bolts, and the lockup the way the bolt is made can't hurt either!

I will they are solid and you'll know them.

I and some of my friends have ES tactical barrels they shoot fine but the wait is crazy. Another reputable maker in the mix can't hurt us users. Competition is the American way.

I am working with a barrel supplier to provide caliber swaps for the SRS. I don't have a HTI so can't be the guinea pig for that. I supplied the extension, extension wrench and specs. I sent him my bolt and next month I will have a Bartlein 1:8 300 PRC with only a 4 month wait. I will post...

I'd be interested in a short rail for the A1, and an AL picatinny the same length as the DT polymer rail.

yes 50 BMG, I had a devil of a time getting a reading at all.

The angle/bevel is the difference, I am even getting readings on the 50 now.

I tried the 50 BMG with the new angle mount.. no love! I brought my MagnetoSpeed and didn't want to mess around. My friend has a 416 Barrett, previously he was unable to get a reading on it, and he logged every shot.

To the OP thanks for doing this!

I took mine out today and used the 3d printed angle adapter. I did not drop one shot 338 LM and 6.5 Creedmoor. I was at about 90% capture rate previously. I think angling it toward the barrel is a good find. I'll try the 50 probably Friday.

It does not work for me and a buddy with large projectiles (50 BMG, 416 Barret).

Mine has been giving me fits with a 50 BMG, I moved this thing all over the place, close to the muzzle, right below the exit hole in the brake, 1/2 back to the stock, back to the stock, just behind the brake, all with and without the parabolic attachment. I even tried it on a modified MK...

I finally bought a Giraud. I then removed the cutter and left the shaft in a no longer needed (since I bought a Giraud) WFT and stuffed it with bronze wool. I chucked the stuffed WFT in a Trim-it motor. After I trim a case i stick it in the spinning bronze wool for a second or so and get a...