• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

I

Iron Worker

Full Member Minuteman
Sergeant 66 From Nevada
Messages
667
Featured content
1
Reaction score
144
XP
6
Level
1
Joined
Last seen
Add Feedback

Latest activity Postings Featured content About Feedback Stats

    • I
      Iron Worker replied to the thread 22 creedmoor.
      I do not, plus I've already shot them all.
    • I
      Iron Worker reacted to 6brshooter's post in the thread 22 creedmoor with Like Like.
      Don't have any hi res pics of that powder, do you? All the re16 I have is dark charcoal to black and is irregular cut/shaped pieces...
    • I
      Iron Worker replied to the thread 22 creedmoor.
      It was 41.3 grs, now am I certain it was H4350? It sure looked like it, or was it Re#16
    • I
      Iron Worker replied to the thread 22 creedmoor.
      I pulled one apart 80 gr ELD,it looked like H4350. Out of my 26"bbl rifle I was getting 3350 with close SD
    • I
      Iron Worker replied to the thread 22 creedmoor.
      Yes, Federal 210 LR Match. What velocity are you getting out of the Copper Creek ammo?
    • I
      Iron Worker reacted to Wes owens's post in the thread 22 creedmoor with Like Like.
      Are you using Large Rifle Primer brass for your loads on the 75 gr ELM? I’m still shooting some Copper Creek 75ELMs and I’m in process...
    • I
      Iron Worker reacted to wildturkey2's post in the thread 22 creedmoor with Like Like.
      Pederson data shows 43grains of H 4350 running a 80 grain bullets to be way over pressure.am I missing something? I just had a 22 CM...
    • I
      Iron Worker replied to the thread 22 creedmoor.
      I've found the loads I'll take to MT Prairie dog fields. 132 rounds down my new rifle. 26" Rem Varmint contour Muller works 8"twist bbl...
      • IMG_3365.jpg
    • I
      Iron Worker reacted to 6brshooter's post in the thread 22 creedmoor with Like Like.
      After a seating depth test, I settled on 43.1gr h4831sc and .010 off with 90gr vld. Shot them at 750 today to see how they watermarked...
    • I
      Iron Worker replied to the thread 22 creedmoor.
      Has anyone used Short Action Customs dies for their 22 Creedmoor or any caliber? They're expensive. Are they worth it?
    • I
      Iron Worker reacted to DLS's post in the thread 22 creedmoor with Like Like.
      Out of those W-W 760 would be a good choice I think. I have ran 4000MR out of a 26 inch barrel at 3730 fps. My load was 44.5gr but of...
    • I
      Iron Worker replied to the thread .224 62gr ELD-VT Reports?.
      What was your load? I have those bullets. My new 22 CM with its 26" pipe 8"-twist wants to shoot those.
    • I
      Iron Worker reacted to firefighter1178's post in the thread .224 62gr ELD-VT Reports? with Like Like.
      Shot a couple coyotes with them and my wife shot a doe a 420 yards. 22 Creedmoor 3760 FPS
    • I
      Iron Worker replied to the thread 22 creedmoor.
      Starting load. I have numerous Fast, medium, and slow-burning rate powders. Re#17 was suggested. In my standard 22/250, W-W 760 is king...
    • I
      Iron Worker reacted to JR1200W3's post in the thread 22 creedmoor with Like Like.
      Highest velocity load or starting load? With what powder?
    Show older items
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back