Recent content by jareese

You still have any of this?

The RCBS Ammo master-2 will handle the 50BMG - I use it to load my .300 WM at 3.700" OAL - plenty of room, no need to angle the bullet up into the die. Midway has them for $339

It will be nice when they let you adjust to FPS from MS, also changing projectile weights would be nice to do on the App when shooting different rifles on testing outings... They advertise being able to change settings.... Well - I say, not really in my experience with the app.

I should also say that this was on a 24" 8 twist heavy barrel

I should also say that this was on a 24" 8 twist heavy barrel

Weights are similar to Lapua - 165-167gr +/-

Ok - bit of a list here - ALL loads shown had Ejector marks and mild cratering at 40.8 grains - got worse from there. Speeds obtained with my LabRadar - shooting in the shade, wind switching from front to back (S to North) Temps around 68-70* - 29.9bar - 70%Hu Berger Hybrid 140 load/speed...

Ok - bit of a list here - ALL loads shown had Ejector marks and mild cratering at 40.8 grains - got worse from there. Speeds obtained with my LabRadar - shooting in the shade, wind switching from front to back (S to North) Temps around 68-70* - 29.9bar - 70%Hu Berger Hybrid 140 load/speed...

Range update on the Starline 6.5 CM SRP brass. Unfortunately for me, in at least in one of my rifles, the starline brass is a no go. Pressure signs at 40.8gr. of H4350 with Berger Hybrid 140, ELD-M 140, and ELD-M 147. Blew primer at 41.6 with the 147 and 42.6 with the Berger Hybrid 140. Sent...

Range update on the Starline 6.5 CM SRP brass. Unfortunately for me, in at least in one of my rifles, the starline brass is a no go. Pressure signs at 40.8gr. of H4350 with Berger Hybrid 140, ELD-M 140, and ELD-M 147. Blew primer at 41.6 with the 147 and 42.6 with the Berger Hybrid 140. Sent...

Just posted here: https://www.snipershide.com/shooting/forum/sniper%C2%92s-hide%C2%AE-advance-marksmanship-unit/sniper-s-hide-reloading/6507014-starline-enters-6-5cm-brass-market?p=6580778#post6580778

I just received 250 6.5 Creedmoor SRP brass from Starline. Brass prep is needed as many case mouths are dinged, bodies seem OK on the 100 I took out to process. Length is a little short anywhere from 1.90-1.91". Primer flash hole is "regular" size, not the smaller flash hole as in Lapua or...

ADMIN - MODERATOR? Is someone from SH able to assist with this please?

Thanks man!

Mr. Zick - I'm in Sauk City. I'm an officer of a new club starting up in Fennimore, WI. We normally shoot out to 1065 yards - the land owner has figured out how to get out over 1400. I have yet to shoot it as I am not comfortable at 1065 yet, but I'm getting there. More trigger time is needed.